Oil heating - Import export

It ensures that the daily required oil is heated to bring it to the appropriate fluidity level to be fed into the system.

The rotation of high speed shaft should not be more than 1500 rpm; The circumferential velocity of gear tranmission should not be more than 20 m/sec; The temperature of work environment should be -40-45°C. If it below 0°C, before start, the lubricating oil should be pre-heated to above 0°C. This speed reducer can be run at clockwise and counterclockwise direction.

UL, Australian, Chinese, Japanese Standards (SPT, SV, SJ, VCTF); Light, Ordinary and Heavy Duty (VV, VVH2, VCT, VCTFK, V-90- H.D.); Outdoor, Oil & Water-resistant (SJTW, SJTOW); Heat Resistant (V2V2, V2V2H2); Rectractil cords cables (VVH8, VVH2H8); Flexible and Extra flexible versions- Class 5 and Class 6; Customized cables for specific application.

Oil bath: For all hair types - the scalp is smeared with wheat germ oil, pre-heated in a water bath. The hair is wrapped for 2 hours with a plastic hat and towel. This helps to remove dandruff and make the hair stop being brittle. After the oil bath, the hair is washed with a neutral or healing shampoo suitable for your hair type. For the skin: Germ lecithin and alpha-tocopherol protect cells from the toxic effects of free radicals, namely: they play an important antioxidant role against skin aging. They increase skin tone and have anti-inflammatory effects. The oil is used as a basic massage oil for very dry hair and oily skin. Available in compositions that are directed against the formation of stretch marks and skin relaxation.

Economizer is a product which provides fuel saving and boiler efficiency in boilers, steam boilers, hot water boilers and hot oil boilers by using the heat of the flue gases in order to increase the temperature of the feed water (and fluids) in the system. The payback amortization of economizers varies depending on such factors as the capacity of the system, efficiency of the boiler, and its application areas. The pay-back period of an efficient economizer varies between 3 – 18 months.

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Improve the efficiency of home heating systems Engineered for use in home heating systems, POREX® oil filters are designed in various shapes, sizes, and a range of filtration efficiencies to provide high oil-flow rates. With an insert-molded polypropylene (PP) base that is threaded for ease of cartridge connection, our filters are cost-effective and easy to replace. Specifically designed for home heating efficiency, our filters: Offer high flow rate s to optimize filtration efficiency. Save replacement time – Threaded base makes it easier to connect cartridge when replacing spent filters. Improve performance of home heating systems – Designs can be customized with multiple shapes, sizes and filtration efficiency options. Request Sample ask an engineer

Because the oil heating units come with an integrated fuel tank you won’t need any cumbersome or bulky external fuel tanks, giving you even more freedom and mobility when it comes to choosing the right place for installation. The light yet sturdy undercarriage with extra-large wheels allows you to transport and install the units quickly and easily and because the units are so mobile they can be quickly and easily moved around building sites and over rough and bumpy terrain, even single-handedly if need be. The units’ solid and strikingly simple construction guarentees a reassuringly high level of reliability and a blissfully low level of maintenance. Needles to say safety is always first and foremost with the oil heating units in the IDS Series: The units are standard-equipped with an electronic flame safeguard, safety thermostat for overheat protection and fully automatic aftercooling.

ELECTRIC HEATER FAN TDS 50 EPowerful mobile heating in a trice The robust electric heater fan TDS 50 E is the powerful heating solution for the building industry and agricultural sector, for the catering trade or holiday home. With its hard-wearing double-walled housing, the TDS 50 E is on the one hand flexibly prepared for different operating conditions, and on the other hand offers good thermal insulation. Designed for a mobile change of location, the heating device can be transported conveniently using the practical carrying handle. Unlike directly fired gas or oil heating devices, the electric heater fan neither consumes oxygen nor produces combustion gases. Therefore, it can be used basically everywhere provided there is a socket – particularly for temperature control in unheated rooms.

OIL HEATER FAN IDE 60 DThe integrated fuel tank makes the high-performance direct oil heater fan IDE 60 D our best recommendation for use on construction sites, in halls and so forth! Whether for direct permanent heating in agriculture and production, on construction sites or in storage facilities – there are many typical standard oil heating tasks where sound technology with ideal value-for-money ratio and a high 60 kW heat output is called for. Our response: The oil heater fan IDE 60 D. This ready-for-use heating device is a particularly efficient directly fired oil heater fan and due to its durable housing made of doubly coated material is optimally prepared for various heating applications in well-ventilated areas. In the course of this, the IDE 60 D’s large air outlet ensures a maximum expansion of warm air with a high efficiency level of 100 %.

OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

INOX® Diesel bactericide disinfects the entire diesel system of vehicles and heating oil systems. It effectively destroys bacteria, yeasts, fungi and algae and prevents their formation. This prevents the fuel filter from clogging. A clean fuel system is a prerequisite for the smooth functioning of all system components, a clean combustion and thus an efficient engine operation!

OIL HEATER FAN IDE 20Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 20 Hot air in a trice at a low price: The smallest oil heater fan of the IDE series from Trotec comes up trumps if you are looking for a compact and low-priced yet reliable oil heating solution for flexible heating applications. Whether in workshops, warehouses, production zones or on construction sites – with a heating capacity of 20 kW the IDE 20 confidently generates clean and dry hot air in quantities of up to 600 m³/h. Even longer outdoor applications present no obstacle to the oil heater fan IDE 20, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

ELECTRIC HEATER FAN TDS 19 EFiery red mobile heater as a convenient all-round solution The red electric heater fan does not only have a fiery look, but also presents the ideal heating solution for construction trailers, indoor market stalls or smaller workshops. For the TDS 19 E can be employed at basically all locations where the use of oil and gas heating devices is undesirable or even prohibited, such as in unheated rooms. Thanks to the integrated power cable, all it takes to operate the mobile heater is a socket. The warm air flow generated by the TDS 19 E can be infinitely adjusted to the exact desired temperature, and its heat output can be regulated as needed using the two-stage power control. Beyond that, fan operation without heating function is also possible.

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils, hydraulic oils based on mineral oil. Barrel-polishable, vacuum-constant finish. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil & petrol-resistant, conductive NBR tube Tension and pressure resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Also available as spiral hose. Other versions and dimensions on request.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

universal usecooling, heating, clamping with bellows sealing Modular unit designcustomer taylered configuration, fast and economic cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite ballbearings (can be relubricated) no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar air heat transfer oil 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 190 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 500 1/min NPT thread 800 1/min ISO 228 thread SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring solid grease ballbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air TEMPERATURE MAXIMUM 300 °C heat transfer oil air SPEED MAXIMUM 700 1/min ISO 228 thread 700 1/min NPT thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

universal usecooling, heating, clamping with bellows sealing Modular unit designcustomer taylered configuration, fast and economic cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring solid grease ballbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar air heat transfer oil TEMPERATURE MAXIMUM 300 °C air heat transfer oil vacuum SPEED MAXIMUM 250 1/min DN 100 (4") 300 1/min DN 65 (2 1/2") DN 80 (3") 400 1/min DN 50 (2") SIZEDN 50 (2") DN 65 (2 1/2") DN 80 (3") DN 100 (4")

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite. For coking heat transfer oil with temperature higher than 230 °CVersion HT with diamondhard sealface and hightemperature graphitesealring graphite bushbearingsmaintenance free no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 12,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 175 °C air 190 °C steam 300 °C water heat transfer oil SPEED MAXIMUM 700 1/min ISO 228 thread 700 1/min NPT thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

universal usecooling, heating, clamping with bellows sealing cartridge fast change CDcartridgedesign sealingmaterial ceramics/graphite ballbearings (can be relubricated) no elastomerstherefore no temperature and chemical resistance problems no loose parts, f.e. springs robust and less influence of dirty media self supportingno additional support necessary available in stainless steel PRESSURE MAXIMUM 6,0 bar heat transfer oil air 10,0 bar steam 17,0 bar water TEMPERATURE MAXIMUM 190 °C water steam heat transfer oil air SPEED MAXIMUM 700 1/min NPT thread 1500 1/min ISO 228 thread SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

Explosion protected high performance cartridge heaters for heating of liquids (oil and others), solid bodies or gas Plastics industry: hot runner systems, extruder heating Heating of metal pieces, such as moulds or tools. Heating of valves, nozzles or other parts of machinery Analysis technology Lube oil heaters for small machines.

single inlet/outlet line or combined inlet/outlet line with stationary or rotating syphon pipe universal usecooling, heating, clamping series with ball bearings, graphite bushbearing or solid grease ballbearings bellows sealing available in stainless steel CDCartridgeDesign PRESSURE MAXIMUM 6,0 bar heat transfer oil 10,0 bar air nontoxic gases steam 17,0 bar water TEMPERATURE MAXIMUM 300 °C air heat transfer oil nontoxic gases steam vacuum water SPEED MAXIMUM 600 1/min DN 80 (3") DN 100 (4") DN 125 (5") SIZEDN 80 (3") DN 100 (4") DN 125 (5")