Exporters and importers - Import export

Round floor socket 7003A made of saltwater-resistant aluminum, with 2 slots and a lockable lid. The lid can be removed completely. Single box to be set at floor level, heavy design, accessible by car. Splash proof when closed, protection class IP 65. Standard surface in natural aluminum anodized. Other colors and equipment options on request.

Round hollow floor tank 9908A with a housing made of sendzimir galvanized sheet steel, rim and lid made of solid aluminum with a lid for laying on. The cover also closes in a straight or angled shape when a standard plug is plugged in. The reversible lid is anodized in natural aluminum or can be covered with a carpet, etc. Other equipment variants on request.

Raised access floor power system 8512BK with 12 slots. The housing is made of sendzimir galvanized sheet steel. The insert lid and frame are made of 1.5 mm thick stainless steel. The lid is removable and can be covered with a 15 mm floor covering such as Stone, wood etc. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further equipment variants on request.

Aluminum leveling ring 12251 for floor socket 7702A and 7704A for use in wooden floors or raised access floors. The leveling ring is attached to the floor socket with screws and screwed onto the floor from below. The delivery takes place with grub screws, but without illustrated fastening screws and illustrated floor socket.

The plastic insert 12108 serves as a screed placeholder for the floor socket 9902A and 9902D.

CEE floor box 6400E with one slot. The housing of the CEE floor box is made of stainless steel, the device carrier is made of aluminum. Installation can take place anywhere in the floor, since pipelines are used for the line feed. The lid closes even when the plug is inserted. Further configuration variants on request.

Round CEE floor tank 7012A with lockable lid made of saltwater-resistant aluminum. Due to the massive construction, the CEE floor tank is accessible by car. When closed, it is waterproof. Protection class IP 67. Standard surface in natural anodized aluminum. Further configuration variants and colors on request.

CEE floor tank 8314A made of solid aluminum with lockable hinged lid. Easy opening and closing of the lid thanks to a snap lock integrated in the lid. When closed, the floor tank is splash-proof and therefore also suitable for wet sweepers. The frame and lid surface are anodized in natural aluminum. Further colors and configuration variants on request.

Wall socket 5501A with one slot, splash-proof, with protection class IP44. The hinged lid can be locked with a key and is therefore primarily protected against unauthorized use. The storage box is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. Further colors and equipment variants on request.

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Energiesäule/Energiepoller ES325 für den Außenbereich auf vor Ort erstelltem Fundament. Das Gehäuse ist aus Edelstahl V2A gefertigt und glasperlengestrahlt. Die Geräteplatte besteht ebenfalls aus Edelstahl und ist unverdrahtet. Schutzart IP44 (elektrische Einheiten). Weitere Bestückungsvarianten auf Anfrage.

Wire forms can have a shape that is limited almost only by fantasy. Many of them have some kind of spring functionality, for example some quick fastening applications. In most products, the material is stressed in bending and they can be looked upon as leaf springs made from wire. Wire forms are manufactur

Multi-coil wave springs are made from flat-rolled spring wire that is coiled to a helical shape and the coils are at the same time given a sinus shaped wave form. The force-deflection relation is created by flattening out the wave form when the spring is compressed. The function is hence like a helically shaped leaf spring.

Volute Springs are used as compression springs and made from flat material coiled to a volute. The coils of the material overlap each other and are guided radially by each other during compression, thus giving the spring a stability against buckling that cannot be achieved with conventional compression springs.

Many applications require two similar springs, but with one right-hand coiled and one left-hand coiled. In some cases, these two springs can be combined into a double spring, which has one right and one left-hand coiled spring body connected to each other.

A snap or retaining ring is a fastener or retaining ring that consists of a semi-flexible metal ring with open ends that can be snapped into place. It fits in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

Circlips and Locking Rings consist of a semi-flexible metal ring with open ends that can be snapped into place. They fit in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

As part of a global design, manufacturing and technological development network which includes sites in Cornwall, UK, Lesjöfors in Sweden and Åminnefors in Finland, our manufacturing excellence and customer service is dedicated to world-leading products and services.

Modern manufacturing faclilities using the latest in design and production technology ensure consistent, high quality, long life products that are competitive priced.

Lesjöfors’ range of standard springs consists of over 10,000 different items. Our highly efficient store of standard springs guarantees high delivery reliability. All our standard springs have been posted as 3D CAD models, and are available for downloading.

The Dutch Lesjöfors company Tribelt specializes in developing and manufacturing metal conveyor belts. For more than 70 years, the company has solved problems for customers in many different fields across Europe. We also manufacture sprockets, customized for the design and in the number your application require, its’ tension forces and surrounding environment.

Charging station / charging pillar ES323-EM (electromobility) for pedelecs, e-bikes, e-scooters etc. for indoor and outdoor use. The housing and the base plate are made of solid, blasted stainless steel. The device plate is made of stainless steel. The column is pre-wired ready for connection. Further assembly variants or coating in RAL color on request.

Floor tank 1206 for 6 units. Very compact floor box made of solid aluminum with an anodized aluminum look. Simple assembly, ideal for retrofitting sockets and network connections. Further equipment variants on request.

Floor socket 3202E consisting of a hinged connection module made of 1,5 mm stainless steel, polished. The hinged lid also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for raised floors, exhibition areas, etc. Further equipment variants on request.

Floor socket 3303E made of stainless steel, ground, with hinged lid. Particularly suitable for low installation depths, e.g. in the exhibition area, kitchen, etc. Further equipment variants on request. The frame and the lid are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.

Floor socket 8308A made of solid aluminum with lockable hinged lid. Easy opening and closing of the lid thanks to a snap lock integrated in the lid. When closed, the floor socket is splash-proof thanks to the lid seal and is therefore also suitable for wet sweepers. The frame and the lid surface are anodized in natural aluminum. Other colors and equipment options on request.

Floor socket 9902D made of solid aluminum with 2 slots. The cover is anodized in natural aluminum and closes in a straight or angled shape even when the standard plugs are inserted. By turning the cover by 180°, this version is also suitable for cleaning with wet sweepers. Further equipment variants on request.

Typical areas of use for hydraulic gas spring are controlled opening and closing of hatches and hoods. The gas springs can also be adapted to control complete equipment such as ventilation apertures, chairs, beds, windows, tools and machinery.

Traction gas springs differ from conventional gas springs in that they operate in the pull direction rather than pushing out with force. In the unloaded state, the spring is compressed with the piston rod inside the cylinder.