Coolant - Import export

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. The SBA pumps are equipped with the user-friendly (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 2200 l/min Delivery head: up to 62 m Please contact us for delivery quantity.

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are self-priming after initial filling. All pumps are equipped with a single mechanical seal. SBM Pumps are mounted next to or on top of the tank and they are suitable for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. Volumetric delivery: up to 440 l/min Delivery head: up to 20 m Please contact us for delivery quantity.

Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2500 l/min Delivery head: up to 46 m Please contact us for delivery quantity

Immersion pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies.In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boostingpumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. Extended length is possible. See mechanical/hydraulic features within the technical information section. Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Please contact us for delivery quantity

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The maximum coolant level must stay a few mm/inches below the mounting flange. The STA serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 5000 l/min Delivery head: up to 120 m Please contact us for delivery quantity

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Horizontal cutter pumps

Quick Suctioning Immersion Pumpsseries TGL/SGL equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (grinding oils) as they occur in high-speed grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SGL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 88 m Please contact us for delivery quantity

Large amounts of bushy turnings can be added and processed directly (i.e. from cart dumpers). The shredder with vertical cutters(normal or fine) is especially suitable for crushing tough materials and is fitted with an automatic large part ejector.

The “big brother” of the TA series is set up for very big bushy turnings of hard and brittle material.

The patented one shaft crusher with automatic ejector of large parts. Especially suitable for use in machine pump back systems for chips and coolants. Compact and robust design with the Mayfran high quality features. Maximum security for the user, since no manual intervention is necessary. Large parts can no longer block the crusher and interrupt the operation.

The solution for 1 - 3 machine tools. Dual shaft crusher, built into machine pump back systems, that has been developed for hard and brittle materials. Suitable for small amounts that are fed continuously. Compact design with oversized bearings, shafts and couplings.

Swarf crushing is always the first step for an automated swarf processing

The lift bottom centrifuge is designed for continuous operations. This up and down motion of the live bottom pushes the chips upward through the sieve. The centrifugal force, up to 500 times the force of gravity, will dry the chips, resulting in the maximum degree of de-oiling. The remaining oil content is extremely low. The dry chips fall down over the edge of the drum into a container. The are different models and different drives available.

More and more, strict environmental requirements oblige companies to process the swarf and dispose of them in a dry condition. The reclaimed coolant is to be fed back in to the production process. The VBU centrifuges are available in different dimension and are used for continuous operations

The Centrifuge takes in a slurry of chips and coolant, separates the coolant out by high speed spinning, leaving dry chips.

Machine pump back stations are the ideal solution for the transport of swarf and coolant (oil or emulsion). They are easy to retrofit nearly, to all types of machine tools. Crushers must be added at those machines producing long swarf. High pressure systems can be added easily. Swarf and coolant (oil as well as emulsion) will be conveyed through pipes to a central filter or processing plant

Mayfran drum filters have proven themselves many times over through their reliability, the flexible set-up possibilities and low operational costs for filtering the emulsion or coolant.

The coolant filter for highest quality demands especially for grinding, honing and superfinishing applications. The modular design allows easy up- and downgrading and the candle filter with dry discharge is energy saving.

High pressure coolant systems integrated with chip conveyor or ConSep® and MagSep® systems help increase speed in cutting, milling, and drilling operations while enhancing product quality by keeping tools and workpieces cool and removing chips quickly. Integrating the high pressure coolant system with the chip conveyor incline or coolant tank saves on floor space and eases installation.

Coolant filter used for central coolant cleaning for several machine tools. The universal central filter for short swarf