Component - Import export

Demag components for process cranes turn a crane into a fully fledged process crane, without the need for any additional design or development work. They're fast, safe and reliable, making these components extremely worthwhile elements of the Demag process crane engineering product line. The individual components – MPW open winch units, MPW open winch crabs and corner-bearing end carriages – are proven components that have been tried and tested for many years. They are individually configured to meet the specific requirements of your process crane. The variety of possible applications is virtually unlimited. See all the performance details and benefits on the product pages.

The combination of crane control and wireless control concept creates the link between an operator and a crane and thus makes optimum load handling a tangible experience. Absolutely safe operation of a crane or a system of several cranes must always be guaranteed – safety for the crane operator as well as for the transported goods and surrounding infrastructure. The smart Demag SafeControl system enables independent and continuous monitoring of a crane on the basis of a largely redundant control concept to bring the system to a standstill independently if any irregularities occur. Furthermore, dangerous conditions can be identified and prevented in advance. The crane operator can concentrate fully on his/her work at all times thanks to the safety control system. A crane can be conveniently and intuitively controlled by radio, which is also very efficient. The safety control system combined with radio control can ensure gentle handling and precise positioning of loads.

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

fako® Glass fibre adhesive 9119Xtra is a solvent-free plastic dispersion adhesive, which is characterized by high elasticity and initial adhesion, a thixotropic one-component adhesive with short drying time. fako® glass fibre adhesive no. 9119XTRA complies with the requirements of IMO FTPC part 5 for low flammability, and is affixed with the «Wheelmark» (mark of conformity), the European regulatory marking of all marine equipment, as defined in the Marine Equipment Directive (IMO/MED). Application area: in shipbuilding for "A", "B" and "F" class divisions. Purpose: bonding of glass fabric to mineral wool in pipe and surface areas, bonding to sheet metal, as well as for production of glass fiber fabric cover on rubber products (e.g. Armaflex). It can be used on all load-bearing surfaces, such as plaster, plasterboard and concrete.

Components made from aluminium are created in accordance with your drawings or data. Various surfaces can be generated. The production options at our company are very varied thanks to our comprehensive machine park.

High-precision Aspheres and Acylinders The use of aspheres and acylinders offers substantial advantages: minimization of aberrations, increase in efficiency, reduction of optical elements and weight of the optical system. With its unique molding technique, INGENERIC combines cost effectiveness with highest serial precision. Molded optics can be structured/curved on one or both sides with a large degree of geometrical freedom and a flexible lateral contour. The lateral dimensions range approximately from 2.0 mm to 5.0 mm. Structures in the sub-millimeter range are feasible. Acylinders with larger dimensions are manufactured by INGENERIC’s well-proven grinding and polishing technology. The dimensions of these large acylinders can reach 60.0 mm in length and 120.0 mm in height. This technology is particularly adept for the manufacture of fused silica optics for applications with high power densities. Advantages superior image quality freedom of design free form surfaces integrated...

Microlens-Arrays with superior form accuracy are used for applications, where reliability and highest efficiency are crucial criteria. They range from beam transformation for fiber coupling over the homogenization of laser light up to the efficient combination of laser stacks of identical wavelength. The lateral dimensions of the arrays range from some millimeters in the micro-scale up to 30 millimeters for the macro-scale. The dimension of the array structures are typically in the sub-millimeter-range. With its unique production technique, INGENERIC is able to keep the form accuracy of the arrays within the submicron range. Advantages superior beam shaping efficient transformation and homogenization monolithic structure highes transmission due to minimized transition zones typical facet of 400um long term stability

INGENERIC C-Module The Collimation Module (C-Module) is a highly efficient means of reducing the divergence of diode lasers in the fast- and slow-axis simultaneously. The module consists of two micro-optics, fixed and aligned in one single module with high precision. Alongside its optimum collimation characteristics the module guarantees a simple and cost efficient assembly of diode lasers. The compact C-Module thus guarantees highest brightness of diode lasers in combination with minimum size. Please refer to our broad product spectrum of fast-axis and slow-axis collimators to combine your C-Module for your specific application. Advantages efficient collimation optimized for highest brightness compact module easy to mount transmission up to 99% highest level of precision and uniformity long term stability optimized design

INGENERIC SAC The Slow-Axis Collimation optic is a highly efficient means of forming the beam in the slow-axis of diode lasers. It is available either as a monolithic array of cylindrical lenses or as a single lens. All of our optics are produced using high-quality optical glass. The exacting product tolerances guarantee efficient collimation of the light from all emitters and compatibility with laser bars and stacks Product Spectrum In order to offer the best solution for your application INGENERIC provides a broad spectrum of Slow-Axis Collimation optics off the shelf. With respect to length or support structures the lenses can be tailored to your specific needs. Advantages transmission up to 99% minimized dead zones highest level of precision and uniformity customized solutions with small NRE-costs highly economical manufacturing process for large quantities reliable and stable quality

INGENERIC FAC The most important optical component in the beam shaping systems in high-power diode lasers is the Fast-Axis Collimation optic. The lenses are manufactured from high-quality glass and have an acylindrical surface. Their high numerical aperture permits the entire diode output to be collimated with outstanding beam quality. The high transmission and excellent collimation characteristics guarantee the highest levels of beam shaping efficiency for diode lasers. INGENERIC FAI By means of an FAI lens, the emitter can be directly imaged into a fiber or a target plane. The design of INGENERIC’s FAI lenses is optimized for this specific application and allows an efficient and aberration-free imaging of the emitter Product Spectrum In order to offer the best solution for your application INGENERIC provides a broad spectrum of Fast-Axis Collimation optics from the shelf. Years of development allow us to provide optimized acylindrical lenses for different applications. Based on...

Special Purpose Optics / Systems You require a special optical design or intensity distribution?We offer customized solutions starting with the individual aspherical lens with an optimized design, through to complete optical systems, tailored to meet the specifications of your application.We always remain true to our own principle: Regardless of whether an individual optic or a complete system is concerned, we will put it through a test cycle which is identical to its subsequent application.Thus, we combine optimum design and replicable, dependable quality, to ensure maximum customer benefit. Product Examples individual, aspherical optics monolithic lens arrays line focus modules multi-focus spot module ring focus modules rectangular focus modules

INGENERIC beamPROP The INGENERIC beamPROP is a lens array which matches the beam parameter product (BPP) of the fast and slow axis of high power diode laser arrays. The beamPROP is a key component for the fiber coupling of diode bars dense wavelength beam combining. Both applications make high demands on the components, which are met by INGENERIC’s outstanding manufacturing technology, guaranteeing highest levels of efficiency for diode lasers. Achieve the highest beam quality through the four major features behind the beamPROP: complete utilization of the aperture by minimized transition zones minimum aberrations achieved by highest level of precision and uniformity of single lenslets an exact rotation of the emitter is achieved through the defined center thickness accuracy minimum pointing errors due to an exact position of front and back surfaces

Please contact us for more information on our program of DieClamps, Roller Bars, Consoles and individual Roller Components. We will gladly furnish a quotation for your specific need for you. Our offer included hydraulic power systems as well.

We develop and manufacture electric heating components for air conditioners in train systems and shipbuilding as well as preheaters and braking resistors for the drive technology. In the field of separator technology, we manufacture heating elements for the temperature control of different liquids. In all areas we apply the highest standards of high voltage and insulation resistance.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

unprecedented opportunities thanks to newest 3D-print technology: whether ultra-stable up to 103°C/217,4°F heat-resistant plastic parts or elastical silicone up to 65 shore – we can meet your very special needs on a wide range – with a print resolution of up to 15 μm! Realizing ideas quickly: we print your prototypes, devices, models, sales samples, artworks or even final products made of plastics or silicone. For your individual 3d-print, we need your data-model in STEP- or STL-format. We are looking forward to your inquiries!

Novelis Advanz™ 6CM – s300 is a heat treatable product for automotive structural and crash component applications. This product offers an excellent balance of properties: superior formability in the as-supplied temper, high in service strength, excellent bending and crash behavior. Novelis Advanz™ 6CM – s300 has a wide array of applications for general structure and crash energy absorption such as engine supports, cross members, transmission tunnel and front and rear crash members. As the in-service strength of Advanz™ 6CM – s300 is significantly higher than normal 5xxx alloys, this provides significantly higher energy absorption during crush. All values listed are typical.

This thermocouple extension can be used with any Type K thermocouple. The selection of high-quality components ensures a long service life.

This thermocouple extension can be used for any thermocouple with type “K” mini plugs. Selecting these high-grade components achieves long service lives.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s. Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s. Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s.

Our thermal management and insulation products are far from being just interim solutions. The Thermal Interface Materials (TIM) from Seifert electronic GmbH ensure optimal thermal connection between heat sinks and the components to be cooled. As electronic assemblies become increasingly compact, even a tiny gap between individual components can disrupt the necessary heat dissipation. Air pockets between the heat sink and the component being cooled hinder the optimal thermal connection. Possible consequences include temperature overload, which can lead to overheating in the worst-case scenario. Thermal management and insulation products act as connectors between the heat sink and the electronic component being cooled. They fill every tiny gap between the heat sink and semiconductor with thermally conductive material. This ensures optimal thermal connection and prevents any heat buildup.

For applications involving very high currents and voltages, Seifert electronic provides heat sinks and mounting brackets designed to apply the appropriate pressure for optimal disc cell cooling. Presspack cells are employed in circuits where very high currents and voltages are present. In such scenarios, disc cell cooling is crucial for ensuring good electrical and thermal transfer. Achieving this goal primarily hinges on the connection between individual presspack cells and the heat sinks in disc cell cooling. This connection must be established with the clamping force specified by the manufacturer. With Seifert heat sinks and the accompanying mounting brackets, also known as clamping brackets, we offer professional equipment for maintaining the correct pressure in disc cell cooling applications. This ensures a high level of durability and robustness, contributing to an extended lifespan of the setup.