Compacting - Import export

The unique xiSpec series offers linescan and snapshot mosaic hyperspectral cameras, being smallest in class by far and combining extreme low power consumption and acquisition of hyperspectral imaging (HSI) raw data at very high frames per second. This camera is implemented in a plethora of applications where chemical differentiation is required, e.g. medicine, agriculture, food processing and many more. The small size, low weight and robustness make it an ideal choice for mobile environments such as drones or handheld devices. - Smallest hyperspectral camera - 26.4 x 26.4 x 31 mm, 32 grams - Up to 150 spectral bands/channels in one camera - Spectral Fabry-Perrot filters fully integrated on CMOS pixels without stray light issues - Wide potential - various wavelength ranges between 470 to 960 nm

The xiQ camera series is highly versatile with a selection of popular and established CMOS sensors. The ultra-compact form factor, barely larger than the C-mount, combined with micro-B, and flex ribbon connectors make these cameras the perfect fit for various applications, especially for automation and embedded vision systems. Board-level variants enable custom intgerations into devices and systems, while taped-glass sensor options minimize interference effects in photonics applications. - Most compact cameras - 26.4 x 26.4 x 26 mm small and 27 grams - High frame rate: 500 FPS at VGA and 1000 FPS at 640 x 400 - Low power consumption down to 1 W and minimal heat dissipation - 5 Gbit/s interface 400 MB/s data throughput

Special design of through-beam sensor. Transmitter and receiver are located in the fork or angular limbs and are perfectly aligned to each other.

Compact and very efficient. Our fully hydraulic mandrel bending machine delivers outstanding bend quality and very simple handling, with SPS control for preselection and storage of bending angles via a touch panel.

Compact Rail is a linear system consisting of steel linear rails with induction hardened raceways and high precision radial ball bearing sliders, also made of hardened steel. Thanks to their self-aligning capabilities, Compact Rail linear guides simplify the project, improve the performance and reduce the overall cost of application. Compact Rail linear guides are easy to install on all types of surfaces, including non-machined ones. Compact Rail linear guides feature a robust steel slider with ball bearings, self-centering heads with wipers, longitudinal seals to protect the internal components and a top sealing strip. The slider body is accurately finished with matte longitudinal edge chamfer and a shining ground flat surface. The slider heads are equipped with special slow release felt pads and are free to rotate with respect to the slider body, so that the felts are always in contact with the raceways to ensure optimal lubrication.

Compact Rail Plus linear guides feature double row ball bearings for higher load capacities and rigid rails with convex raceways and new robust steel sliders with longitudinal protection and floating wipers, Compact Rail Plus has been designed for the most demanding applications in terms of high load capacities, high dynamics and work environment. All while maintaining the self-aligning capabilities that make this product family unique. Sliders are available in four versions: guiding slider (RV); floating slider (RP); extra-floating slider (RU) and rotating slider (RA). Combining two rails with different sliders makes it possible to create self-aligning systems that can compensate misalignment errors on two planes: axial up to 3.5 mm and radial up ±1.3°.

The PRECISION SYSTEM series of linear units are self-sustaining profile systems made of extruded aluminum and steel for the TK series, able to ensure excellent precision. The motion is achieved by means of precision rolled recirculating ball screws with preloaded or non preloaded ball nuts, depending on the models. Using the recirculating ball bearing technology for the screws and the rails ensures great performance to the linear actuators, such as: High precision and high axial forces High mechanical performance Low wear and tear Low resistance to movement High speed (for long pitch screws) The Precision System series consists of 4 distinct products with different features: TH, TT, TV, TK. PRECISION SYSTEM - TH TH linear actuators are rigid and compact, ball screw driven linear units, enabling high positioning accuracy and repeatability in all process phases with optimal performance assured, with a repeatability within 5 µm. Thrust force transmission is achieved by means of...

Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

A perfect combination of space savings and dynamics: the GSW Compact Feed Lines Our Compact Feed Lines are an ideal answer to the challenge of a constraint floor and necessity to process thick materials. Marrying the processes of leveling and indexing into one Feeder-Straightener machine allows for a complete Feed Line with only two individual machines and thus greatly reduces the necessary length. Additionally, the decoupling of the coil mass from the indexing process – achieved through a short loop between Coil Reel and Feeder-Straightener – enables dynamic feeding despite the compact footprint. And, if cross-sections are especially big, the loop can be spared completely, creating yet more space. One more advantage, virtually a by-product out of their very nature, is the quicker set-up of our Compact Feed Lines. This elevates them to not only space- but also time-savers!

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

Compact design High cooling capacity High operating pressure Low pressure loss Available acc. ATEX 94/9/EG

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

The PEKI valve series made in germany has been manufactured for decades from high-quality brass components that are assembled with modern injection-moulded parts and sealing elements made in Germany. The PEKI compact valve is installed in small compact boxes and as a valve with float in drinking water systems.

PLACOGRIP® High quality index bolts compact, with stop, proper to small construction dimensions and thin walls INDEXING BOLT Stainless steel 1.4305 SLEEVE Steel gunmetal finish KNOB Polyamide black Further RAL – or special colors upon request PLEASE NOTE Particularly suited for screwing in thin-walled items In this version with stop the button is pulled out, rotated by 90° and secured by the notch Also available with lock nuts DIN 439 for index bolts

The combination of our very comfortable tennis surfaces (point elasticity) with a sprung floor substructure (surface elasticity) certainly offers maximum force reduction! Hall operators can advertise that their choice of sports flooring offers the maximum in terms of joint protection and force reduction! On the other hand, a sprung floor only develops its comfort when there is a lot of movement. Players who only move a little therefore feel no additional comfort! In terms of ball bounce (flatter) and general playing behaviour (e.g. acoustics), sprung floors are a matter of taste. As a rule, however, players quickly get used to the changed playing conditions. A compact sprung floor can be installed on top of the existing tennis floor covering, provided the surface is level. There is no need to remove and dispose of the old floor covering! If the surface needs to be refurbished, the bonded tennis floor can be removed.

Monitor mounting compact The monitor mounting in the "compact" version is new to the program and will be available from the end of April 2018 Feature: short design fixing principle with half shells (suitable for retrofitting and extensions) reducing bushes availableh (round or square 20, 25, 30mm)

Format 96 x 96 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 96 mm, portrait Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 48 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Linear units / linear guides Linear units are used in almost every single area of automation and machine engineering. From simple adjustments that may be seldom required, right up to highly complex, highly precise and highly dynamic multi-axis systems. Every task is different. And every task requires a technically accomplished, cost-effective solution. RK linear units – variety offers the ideal solution The wide range of RK linear units is the result of the variety of customer applications. What used to be referred to as 'special applications' have now become readily available, attractively priced standard modules. It is therefore likely that the ideal RK linear unit for your particular application already exists.

The machines are extremely robust and easy to operate. A selection of setups is available to process tubes of different lengths, with an operational length up to 240“ Our compact and mobile bending machines can now be controlled easily with a touch panel. This opens up new possibilities, like displaying the comparison of target and actual values for all axes. Control of the tolerance of the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool.

This high pressure water jetting unit is extremely flexible due to its usage as a trailer. Three versions of the MK3 with operational pressure of up to 2500 – 3000 bar are available and is ideal for the removal of coating and concrete refurbishment, as well as for the separation and cutting of various materials. The easy to understand WOMATIC 4Control with operational status monitoring, pressurerpm regulation and pressureless circulation ensures high operational safety, low wear and tear, long service life, and last but not least, minimal fuel consumption.

The compact versions of our xiX PCIe interface camera series, equipped with the latest CMOS sensors, are the ideal choice for system integrators with complex setups and high bandwidth demands. Delivering high performance to small spaces and reaching greater distances, these cameras enable even the most challenging multi-camera systems. For the same form-factor and sensor options, but standard and easy-to-use USB3 interface, please consider the xiC camera family. - Smallest cameras with Sony CMOS Pregius™ - 26 x 26 x 31 mm - Full high-speed potential - 2.2 Mpix at 337 FPS to 65 Mpix at 71 FPS - Low power consumption starting with under 3 watts - Ideal for embedded vision - range of standard and OEM accessories - Lowest latency - PCI Express reduces the delay to almost non-existent

The machines are extremely robust and easy to operate. A selection of setups is available to process tubes of different lengths, with an operational length up to 240“ Our compact and mobile bending machines can now be controlled easily with a touch panel. This opens up new possibilities, like displaying the comparison of target and actual values for all axes. Control of the tolerance of the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool.

Crane Installations Energy capacity 450 Nm/cycle Stroke max. 62 mm For even more protection: The profile dampers from the TC range of the ACE TUBUS-Series can also be used as safety dampers. These maintenance-free, ready-to-install damping elements made of co-polyester elastomer have been specially developed for use in crane systems and fulfil the international industry standards OSHA and CMAA. In the special TC-S design, managed to achieve the spring rate required for crane systems with the unique dual concept. Whether TC-S or TC, this range of models represents a cost-effective solution with high energy absorption for energy management systems. The very small and light design of Ø 64 mm to Ø 176 mm progressively covers energy absorption within a range of 450 Nm to 17,810 Nm.

Radial Damping, Heavy Duty Version Energy capacity 405 Nm/cycle Stroke max. 14 mm Impact and collision protection: The TR-HD profile dampers are stressed in the same way as the basic model TR but offer a higher force and energy absorption with a shorter damping distance thanks to the solid design. Different damping characteristic curves can be achieved with two different co-polyester elastomer hardness levels. The slightly oval (bi-concave) shape also ensures a softer force intake. This series absorbs a lot of energy despite the low height: a range of 405 Nm to 11,840 Nm is progressively covered by strokes of 12 mm to 44 mm. With two screws, included in the delivery, the damper can be easily and quickly fixed both horizontally or vertically. The drill hole distance is adapted if required.

ELKOMIX-200 QUICK MASTER Compact Concrete Batching Plant which is equipped with 7500/5000 l. ELKON twin shaft mixer has the highest capacity among the members of ELKON Quick Master Compact Concrete Batching Plant series. The concrete plant which has quite high production capacity can also be commissioned quickly and economically due to its folding and modular designed structure. ELKON Compact Concrete Batching Plants, which reflect ELKON manufacturing culture based on high technology and experience since 1975, provides the following advantages to its users - Quick and easy installation (only 2 days) - Cost effective sea and land transportation - Possibility of installation on a confined space - Quick and easy relocation - Flexibility in the configuration - Lowest foundation cost (only flat concrete surface is adequate for installation) - Easy maintenance and low operating costs - High production performance with optimized automation system