Results for
INNOVATIVE SENSOR TECHNOLOGY IST AG
Switzerland
HYT271 MK33 in a robust and compact screw-in stainless steel housing with a metric M14 thread. Ideal for test measurements in an industrial environment. Sustains -40°C to +120°C and 0 to 100%RH (water activity aw). Digital I2C interface over 0.5m cable. Compatible with HYT Test board (USB or 0 to 10V analog outputs). This functional prototype is intended for easy evaluation of oil sample compatibility. Please contact us for support during your tests and to discuss the design of an OEM sensor probe tailored to your application.
Request for a quoteXIMEA GMBH
Germany
The unique xiSpec series offers linescan and snapshot mosaic hyperspectral cameras, being smallest in class by far and combining extreme low power consumption and acquisition of hyperspectral imaging (HSI) raw data at very high frames per second. This camera is implemented in a plethora of applications where chemical differentiation is required, e.g. medicine, agriculture, food processing and many more. The small size, low weight and robustness make it an ideal choice for mobile environments such as drones or handheld devices. - Smallest hyperspectral camera - 26.4 x 26.4 x 31 mm, 32 grams - Up to 150 spectral bands/channels in one camera - Spectral Fabry-Perrot filters fully integrated on CMOS pixels without stray light issues - Wide potential - various wavelength ranges between 470 to 960 nm
Request for a quoteXIMEA GMBH
Germany
The xiQ camera series is highly versatile with a selection of popular and established CMOS sensors. The ultra-compact form factor, barely larger than the C-mount, combined with micro-B, and flex ribbon connectors make these cameras the perfect fit for various applications, especially for automation and embedded vision systems. Board-level variants enable custom intgerations into devices and systems, while taped-glass sensor options minimize interference effects in photonics applications. - Most compact cameras - 26.4 x 26.4 x 26 mm small and 27 grams - High frame rate: 500 FPS at VGA and 1000 FPS at 640 x 400 - Low power consumption down to 1 W and minimal heat dissipation - 5 Gbit/s interface 400 MB/s data throughput
Request for a quoteLINDHAUS S.R.L.
Italy
Laser analyzer PM2,5 3 ultra-low consumption UV-C LED lampsAutomatic adjustment based on the quantity of detected micro dust.Air released into the environment after passing through the hepa filter H13 100% stainless steel100% made in Italy by Lindhaus
Request for a quoteEWM AG
Germany
Maximum operating convenience, long service life and all pulse, standard and innovative welding processes optimised and included in the machine at no extra charge. The members of the Titan XQ family are taking a quantum leap in welding technology. Here, perfect weld seams are already pre-programmed for low- and highalloy steels and aluminium in all material thicknesses and all positions. Thanks to the many options and accessories for the Titan XQ puls series, you can put together your machine in the way that best suits you, your needs and your applications. An exceptionally long duty cycle of 100% at up to 320 A, for example, makes for effective working. Perfect welding becomes sustainable – 24 hours a day, 7 days a week.
Request for a quoteNAMSAN METAL COMPANY
Turkey
• Double Glass with Cold Surface • 2 Hotplates (1500W + 1000W) • Electrostatic Powder Painted Body • Chrome Resistances • Lower resistance covered for safety • Grill Mode • Non-smelling Fiberglass Binding Insulation • Enamelled Cavity • PBT Knobs • Chrome Coated Grill • 42 Liters Internal Volume • Capiller Sensitive Thermostat • No-Frame Glass Door , Elite design • Detachable Inner Glass (easy clean)
Request for a quoteLEONI DRAHT GMBH
Germany
Semi-concentric or concentric strands with very short lay lengths and an extraordinarily smooth surface made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 16 mm². LEONI has had its manufacturing process specifically dedicated to this type of product patented. LEONI smooth bunches boast an exceptionally compact and precise round structure and have a very good Flex life. They are particularly suitable for moving applications and for thin-gauge coating with high-grade isolation materials benefitting from a long flex life as well as weight and space efficiency.
Request for a quoteLEONI DRAHT GMBH
Germany
Compacted material terminals made from Cu-ETP1 and Cu-OF1, in bare and tin-plated, nickel-plated and silver-plated upon request, in hard or soft annealed. Cross-section ranging from 1 mm² to 95 mm² depending on welding area. Compact welded terminals of different copper strands can be automated processed. A production of individual parts is possible as well as large-scale production. Resistance welded strands by LEONI are particularly suitable for high-voltage battery connectors, for high power connectors, for switch contacts and for special applications.
Request for a quoteBRÜCKNER TEXTILE TECHNOLOGIES GMBH & CO. KG
Germany
Compacting is the last finishing process after relaxation or drying and has thus decisive importance for the residual shrinking, the hand and the aspect and the shine of the fabric before cutting and makeup. The BRÜCKNER compacting calender is characterized by an extremely short fabric path, an optimum traction control and a sophisticated drive technology allowing high production speeds with consistent fabric quality. Depending on the fabric type and the quality requirements, BRÜCKNER can offer the following compacting solutions two felt belt compactors arranged one behind the other, rubber belt shrinking unit according to the Sanfor principle, rubber belt shrinking unit with downstream arranged felt belt compacting calender. In addition, the following units can be integrated into the compacting line equalizing frame for the overspreading and width control, straightener, steamer unit, edge cutter (knife or scissor type).
Request for a quoteCEDS DURADRIVE GMBH
Germany
CEDS synchronous motors offer you special advantages: Very high acceleration capacity Light and compact design Efficient in terms of size High efficiency even at low speeds High speed stability Very high speeds can be achieved Reinforced winding insulation for high dielectric strength and the associated better resistance to partial discharge within the winding Quiet running Low reactive power requirement Synchronous operation of several drives even with different loads In most cases, the rotor of a synchronous machine is designed as a permanent magnet rotor and also has a damper cage to ensure smooth, stable operation of the drive. The interaction of the two magnetic fields of the stator and rotor results in a rotary movement. The operating behavior of the synchronous motor is more dynamic than that of the asynchronous machine
Request for a quoteCEDS DURADRIVE GMBH
Germany
CEDS servo motors offer you special advantages: Very high acceleration capacity Light and compact design Efficient in terms of size High efficiency even at low speeds High speed stability, torque density and power density High positioning accuracy High speeds can be achieved High dynamics due to the low mass inertia Reinforced winding insulation for high dielectric strength Quiet running Low reactive power requirement Synchronous operation of several drives using a frequency converter Magnetically lockable by the control of the frequency converter Both DC, synchronous and asynchronous motors can be designed as servomotors. Together with a servo amplifier, they then form the servo drive. It can be used to precisely regulate the torque, the speed or the position. For this purpose, the current position of the rotor is always measured with a rotary encoder, e.g. an incremental encoder.
Request for a quoteCEDS DURADRIVE GMBH
Germany
CEDS motor - kits offer you special advantages: Very high acceleration capacity Integrated motors for your application Light and compact design Efficient in terms of size High efficiency even at low speeds High speed stability, torque density and power density High positioning accuracy High speeds can be achieved High dynamics due to the low mass inertia Reinforced winding insulation for high dielectric strength Quiet running Low reactive power requirement Synchronous operation of several drives using a frequency converter Magnetically lockable by the control of the frequency converter Motor - kits can be designed as synchronous, asynchronous, servo or torque motor kits. These can be perfectly integrated into a complete system and save the customer a lot of space and unnecessary connections and wear parts like bearings.
Request for a quoteIPF ELECTRONIC GMBH
Germany
Special design of through-beam sensor. Transmitter and receiver are located in the fork or angular limbs and are perfectly aligned to each other.
Request for a quoteIIM AG MEASUREMENT + ENGINEERING
Germany
With a free inner diameter of 45 mm, an outer diameter of 100 mm, a design height of 25 mm and a weight of just 250 g, the LR45 is very compact. The three-dimensional cable outlet on the back enables highly flexible electrical integration of the light. Rear mounting threads and versatile accessories allow uncomplicated mechanical connection to various cameras and sensors. This makes the LR45 the ideal choice for use in confined spaces as well as in motion handling and robot vision systems – even under demanding industrial conditions thanks to IP64 protection. Despite its compact exterior, high-performance integrated controller technology for either continuous, switched or flash operation mode is hidden inside the LR45. In addition, the light has high-speed trigger inputs and the option of brightness control. The irradiance characteristics of the light can be adjusted to the application with the aid of ancillary lenses.
Request for a quoteLISINE EPSTEIN COSMETICS BV
Belgium
BeNatural Compact Powder to smooth and enrich your natural complexion The creamy texture makes it easy to apply. Perfect for a natural looking color. Create your own look thanks to its soft texture and buildable formula. Velvety and easy to apply! BeNatural Compact Powder gives you a pure and natural look and smoothens your skin. Let your face radiate and accentuate your natural beauty. The powder allows you to apply it evenly, without leaving dusty residues. The result is a compact and homogeneous skin. Thanks to highly absorbent active ingredients, it helps reduce the production of sebum and improves the sensorial perception of products. Our powders are biodegradable, which result in a velvety touch and improve the adhesion and the smoothness. The soft focus properties help minimize skin imperfections.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CIC - KLAUS CZERWONKA
Germany
filter water separator Sizes: 1/8" and 1/4" Filter fineness: 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 450 Nl / min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Filter+regulator+lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1bar: 280 Nl/min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar
Request for a quoteTRANSFLUID® MASCHINENBAU GMBH
Germany
Compact and very efficient. Our fully hydraulic mandrel bending machine delivers outstanding bend quality and very simple handling, with SPS control for preselection and storage of bending angles via a touch panel.
Request for a quoteMEDIAPACK®
Portugal
Compact cardboard box, super resistant and totally personalised for COCA-COLA.
Request for a quoteWOOD MOOD
Ukraine
A "fragile" (but tough) candle with an exotic texture due to special natural processing. It was carefully cleaned of the bark while preserving its natural shape and covered with a protective layer of odorless natural oil. This gives an amazing feeling of smoothness of its surface.
Request for a quoteAVM AUTOMATION
France
Pneumatic cylinder double acting Guided by 2 rods on ball bushings or bronze bearings Elastic damping at end of stroke Magnetic piston and Tgroove for sensor Robust and precise compact cylinder with guide Long and precise guidance because even for very short strokes, guidance is ensured by 4 bronze bearings or 4 ball bushings as the shortest body is the 50 mm stroke for lower strokes, a stroke limiting ring is placed in the cylinder. This guidance avoids the problems of buttressing, regularly encountered with ultrashort guides. These pneumatic cylinders are robust and reliable, even at high speed thanks to screwed cylinder’s covers (no circlips) an hardanodized body at 35 μ a thick front plate allowing a long centering of the rods for a better resistance to torsion Guided cylinder for universal detector The 5 / 6.5 mm Tslots allow the use of the majority of brands of magnetic detectors on the market. Stroke adjustment on compact guided cylinder
Request for a quoteEXPROZONE
Turkey
Elevate Your Daily Routine: Embrace Relaxation and Renewal in Our Stylish Shower Enclosures & Shower Compact Systems.
Request for a quoteRAYUEN PACKAGING CO.,LIMITED
China
DESCRIPTION: Empty plastic makeup compact container, features at standard Octagon profile, it could be clear or with customized color for different formula presentations; a mirror can be added as per request. This makeup compact is perfect packaging solutions for pressed face powder products like blush, highlighter etc.
Request for a quoteBOSPORAS
Turkey
Our 7-roller ACS Series compact system press feeding machines consist of 60 and 1300 coil width, 0,5 and 4 mm of sheet metal thickness, between 6.000 and 10.000 kilograms of coil weight capacity feeder, straightener and decoiler. 7-Roller Compact Coil Feeder System Components Hydraulic Decoiler Hydraulic Inner Tightening and Unloading Upper Arm Coil Servo Feeder Straightener Straightener Adjustment and Fine Positioning Feature Roller Group and Gear Transmission Feature Distance Detection and Proximity Sensor Feature Die Memory System Multiple External Output Options Press Automation Control Feature Operation with Touchscreen and Remote Connection Support Features
Request for a quoteBOSPORAS
Turkey
Our 11-roller ACS Series compact system press feeding machines consist of 600 and 1600 coil width, 2 and 10 mm of sheet metal thickness, between 6.000 and 15.000 kilograms of coil weight capacity feeder, straightener and decoiler. 11-Roller Compact Coil Feeder System Components Hydraulic Decoiler Hydraulic Inner Tightening and Unloading Upper Arm Coil Servo Feeder Straightener Straightener Adjustment and Fine Positioning Feature Roller Group and Gear Transmission Feature Distance Detection and Proximity Sensor Feature Die Memory System Multiple External Output Options Press Automation Control Feature Operation with Touchscreen and Remote Connection Support Features
Request for a quoteAXINAR SMPC
Greece
The Calos unit is the best combination of technology, performance, efficiency, safety, ecology and style. Its functional design offers the ease of an automated heating system. Its dimensions 0.7 x 0.35 x 1.9m, which are similar to the dimensions of a shoe rack, facilitate its fast and easy installation, making it the ideal solution for every home or small professional space. Calos is not just a boiler, it is an integrated (All-in-one) heating system which includes a circulator, an expansion vasel, a safety valve, an automatic air vent and an automatic filling valve with a manometer, which is ready-to-use, with no need of further intervention to the installation space. Its clever architecture offers maximum performance and economy compared to a simple boiler. It is available at a power range 8 to 32 kW and is auto-cleaning.
Request for a quoteResults for
Compacting - Import exportNumber of results
644 ProductsCountries
Company type
Category