Cleaning supplies - Import export

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

Unfailingly the flexible and effective infrared heating panel TIH 400 S impresses with cosy warmth in every conceivable application scenario. Whether it is intended to be used for additional selective heating in the living area, as sole heat source in rooms so far without a heating system such as the hobby room in the basement, or for commercial use, e.g. in the catering trade, at cool workplaces in the storage room or even in the area of construction drying and renovation. For its heating operation the versatile flat heating panel requires nothing more than a power outlet, it is perfectly easy to handle and supplies clean heat – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the TIH 400 S heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air

Flutainer® offer perfect conditions for the transport and storage of liquids and paste-like goods. Additionally, they save valuable storage space, because they can be stored space-saving before they are filled and after they have been discharged. This flexible bulk container can be built up by only one person in less than one minute. Rigid containers need the same space, no matter whether they are empty or filled. Flutainer® are different: Flutainer® are only built up when they are needed, for example for liquid sugar, to store auxiliary material for textiles or powder which is sensitive to pressure. Flutainer® are made up of a fabric container on the outside and a multiple PE-inner lining, a wooden pallet, four steel poles and a stacking frame. Fields of application: Glue Dispersions Auxiliary material for textiles Dyes Squash Tomato puree Honey or liquid sugar Dust or granules sensitive to pressure Main industries: Construction industry, chemicals, pharmaceuticals, terrestrial and garden products, drinks and instant beverages, wood products and synthetic material, cosmetics, food, disposal of waste, other pet supplies, cleaning agents, components for further processing and refinement

Taylor made packaging, transport or storage containers for every kind of bulk goods and every transport route from a volume of 200 litres up to a volume of 3,000 litres, are provided by the use of Pactainer®. Concerning such Flexible Intermediate Container (FIBC) which are subject to constant innovations, EMPAC belongs to today’s trendsetter in this business. Pactainer® are according to the requirements of their field of application made of flat or circular woven fabric, provided with a PP-coating or with PE-inner lining and produced as a single-use, returnable container or with a permission for the transport of dangerous goods. They are produced with different forms of tops and bottoms and filling and discharge spouts. Our range of products contains 1-loop, 2-loop and 4-loop Pactainer®. For special fields of application, we can offer various custom-built models as well as automatic Big Bags. Fields of application: Chemical raw material and end products Special chemicals Granules Fertilizer Raw material for the food industry Beverage concentrate Stones and raw material and supplies for construction Flyash API pharmaceutical substances Main industries: Products for the agriculture industry, construction industry, chemicals, pharmaceuticals, terrestrial and garden products, drinks and instant beverages, wood products and synthetic material, cosmetics, food, disposal of waste, other pet supplies, cleaning agents, components for further processing and refinement

High-pressure cleaning and surface preparation with water requires precise management of the water jet. This precise management is necessary to ensure that the required result (e.g. surface finish) is achieved within a reasonable time. The method must be safe and fatigue free. With this in mind, we offer a specially designed and manufactured range of high pressure guns with electrical or mechanical control. The exceptional ergonomics of these tools have been achieved through innovative detail solutions: For example, our high-pressure guns are equipped with a special swivel handle that transmits any torque to the wrist. In addition, the hose connection can be swivelled in all directions, allowing optimum hose routing for all working situations. Our range of high pressure guns is complemented by various versions of foot valves, rotating gun lances, rotating nozzles and other accessories for a wide variety of applications, such as pipe cleaning.

BK 0.5 US/K – BK 2.5 US/K (0.5 – 2.5 m² filter area) Dry cake discharge No fleece consumption compact systems are used for cleaning contaminated cutting fluids in metal processing and rolling mill operations. Cleaned cutting fluids have longer lifespan, improve the surface quality of workpieces or rolled goods, and help dissipate heat at the processing or forming location. Advantages: Fully automatic operation Excellent filtration results without fleece consumption Minimal carryover of cutting fluid Dry cake discharge Low maintenance requirements Full-flow filtration Maximum lifespan of cutting fluid Option for emergency operation with fiber fleece The cleaned cutting fluid is supplied to the system pump (A) from the clean tank (B) of the processing machine (C). The contaminated cutting fluid is introduced into the dirt tank (E) of the folding belt filter system through the lifting stations. The internal processing of the system consists of two steps: “Filtration” and “Regeneration.”

Automatic Precoat Filter are used for the cleaning of contaminated cutting fluids in metal processing and rolling mill applications. Clean cutting fluids lead to longer tool life, improved surface quality of workpieces or rolled goods, and efficient heat dissipation at the processing or forming point. Advantages: Fully automatic operation Excellent filtration results Compact size Low maintenance requirements Full-flow filtration Dry cake discharge with minimal carryover of cutting fluid No fleece consumption Maximum lifespan of cutting fluid Operating Principle: The cleaned cutting fluid is supplied to the filter system pump (1) from the clean tank (2) of the processing machine. The contaminated cutting fluid is introduced into the dirt tank (3) of the cake filtration system through inlet channels or lifting stations. The internal processing of the system consists of four steps: “Cake Formation,” “Filtration,” “Regeneration,” and “Sludge Treatment.”

With the properties of the new DT300P digital power source, TIG welding can be significantly simplified: There are numerous options in a compact 30 kg unit. With a multitude of pulse options, the device can be ideally set for different tasks: A controlled heat supply ensures optically clean and even seam structures during low-pulse welding (up to 20Hz) - especially with different material thicknesses. The high arc stability in high-pulse welding (from 20 to 500 Hz), on the other hand, is demonstrated in the lower current range, especially in thin sheet metal applications: welding can be carried out without any problems from a material thickness of 0.3 mm. The robust 80 kHz IGBT inverter stands for reliability and extreme arc stability - even with low currents. The digital control panel, which is designed for rough industrial use, offers many advantages for the user.