Bearing elements - Import export

DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel DryLin® T - Technical data DryLin® T - Clearance adjustment DryLin® TWBM hand clamp DryLin® T - Design rules DryLin® T - Automatic clearance adjustment DryLin® linear guide systems in the cleanroom DryLin® T - Applications DryLin® T - System design DryLin® T - Installation videos System selection & service life calculation DryLin® T - Adjustable clearance The DryLin® T standard version is supplied preset and can be put into operation at once. The user can also manually adjust or fine-tune the clearance of the linear guide. The individual adjustment for your application, as well as the potential to respond to uneven screw surfaces through specific clearance allowance. DryLin® T - Adjustable clearance DryLin® T - Automatic DryLin® T carriages of the automatic version have a mechanism that automatically adjusts the bearing clearance after removal of the preload key. In case a bearing clearance of more than 0.13 mm has to be adjusted during operation, the bearing clearance automatically resets itself when the carriage is completely unloaded. DryLin® T - Automatic DryLin® TW-HKA manual clamp The manual clamp has been developed for simple tasks. The creep behavior of the clamped plastic causes a slackening in clamping force over time (up to 70%). Therefore safety-related parts should not be clamped. Please approach our applications consultant if you require other options for the clamping. DryLin® T - Manual clamping Drylin® T - Heavy Duty This series is used for the most extreme conditions such as dirt, adhesive residues, chips, mud, etc. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore non-detachable. This system is compatible with many standard commercial recirculating ball bearing systems and is available in the following sizes: TW-01-20, TW-01-25 and TW-01-30. DryLin® T Heavy Duty DryLin® T - Low-profile guide The clearance is not adjustable for the DryLin® T low profile guide rails. The gliding elements are mounted with positive fit in the chromated zinc carriage. This simple and effective design enables guides that are rugged and low-priced at the same time. DryLin® T - Low-profile guide DryLin® T - Compact linear guide This compact linear guide is suitable for rugged use (without clearance adjustment). This system has a slim design and the same dimensions as conventional recirculating ball bearing systems. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore undetachable. Suitable for DryLin® T guide rail of installation size 20. DryLin® T - Compact linear guide DryLin® TWBM - Manual clamping with high holding force This manual clamping is designed for a long-lasting high holding force of up to 500 N per clamping element. DryLin® TWBM hand clamp DryLin® T clamping elements for rail guide DryLin® T clamping elements for fast positioning by hand or with pneumatics. DryLin® T clamping element DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel Advantages: 100 % lubricant-free Adjustable bearing clearance Automatic clearance adjustment High static load capacity Service life up to 50,000 km without lubrication High dirt resistance Low vibration and low noise When not to use ? When you want to save installation space drylin® N drylin® W When you need a pure stainless steel solution drylin® W drylin® R When you want to construct as economical as possible drylin® N drylin® W

igubal® pillow block bearing, mm/inch Dimensional series K in mm and inch dimensions igubal® pillow block bearing, mm/inch igubal® pillow block bearing KSTM-GT Dimensional series K, large dimensions igubal® pillow block bearing KSTM-GT igubal® pillow block bearing ESTM Dimensional series E igubal® pillow block bearing ESTM igubal® pillow block bearing ESTM-SL Dimensional series E, narrow dimensions igubal® pillow block bearing ESTM-SL igubal® pillow block bearing AD-01-ESTM Adapter for pillow block bearings of dimensional series E igubal® pillow block bearing AD-01-ESTM igubal®- pillow block bearing ESTM-GT..-GT Dimensional series E with split housing and split ball igubal®- pillow block bearing ESTM-GT..-GT igubal® pillow block bearing ESTM-GT igubal® pillow block bearing ESTM-GT with cylindrical bore igubal® pillow block bearing ESTM-GT igubal® pillow block bearing ESTM-GT150 igubal® ESTM-GT150 - Large pillow block bearing with gliding layer for diameters up to 150 mm. igubal® pillow block bearing ESTM-GT150 Maintenance-free, self lubricating High stiffening High fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Corrossion-resistant Chemical resistant High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight High radial loads Usable in media Space saving Easy to fit Life time predictable Maintenance- and lubrication-free igubal® pillow block bearings are very easy-to-mount bearing elements which compensate for errors and prevent misalignments. Application area igubal® pillow block bearings ideally compensate for shaft misalignments, tilts and bends through their spherical adjustability. Main application areas are wherein such effects should not hinder special designs. igubal® pillow block bearing - Applications Tolerances Maintenance-free igubal® pillow block bearings have a tolerance in the inner diameter, according to E10. The shaft should have a tolerance between h6 and h9. The bearing clearance compensates for bearing expansions during heating. Installation igubal® pillow block bearings are designed to be fastened with 2 screws. A precise alignment of the bearing housing is not required as the spherical bearing automatically compensates for error. Delivery program igubal® pillow block bearings are available in the dimensional series K and E for shaft diameters from 5 to 50 mm. The dimensional series K is also available in inch dimensions. Please ask us for other dimensions. When to use it? When chemical resistance is required When a low-cost alternative is desired When dirt-resistant bearings are needed When misalignments should be compensated When fully split components are needed When not to use? When temperatures above +80°C prevail When an integrated collar is required When dimensions over 50 mm are needed When rotation speeds in excess of 0,5 m/s should be implemented igubal® pillow block bearing, mm/inch Dimensional series K in mm and inch dimensions igubal® pillow block bearing, mm/inch igubal® pillow block bearing KSTM-GT Dimensional series K, large dimensions igubal® pillow block bearing KSTM-GT igubal® pillow block bearing ESTM Dimensional series E igubal® pillow block bearing ESTM igubal® pillow block bearing ESTM-SL Dimensional series E, narrow dimensions igubal® pillow block bearing ESTM-SL igubal® pillow block bearing AD-01-ESTM Adapter for pillow block bearings of dimensional series E igubal® pillow block bearing AD-01-ESTM igubal®- pillow block bearing ESTM-GT..-GT Dimensional series E with split housing and split ball igubal®- pillow block bearing ESTM-GT..-GT igubal® pillow block bearing ESTM-GT igubal® pillow block bearing ESTM-GT with cylindrical bore igubal® pillow block bearing ESTM-GT igubal® pillow block bearing ESTM-GT150 igubal® ESTM-GT150 - Large pillow block bearing with gliding layer for diameters up to 150 mm. igubal® pillow block bearing ESTM-GT150

Vibration dampers of the series GAB are especially used to stabilize your pipe system. You can use these elements to absorb thermal expansion of the pipes, too. These elements are often used in the field of plant engineering. Depending on the chosen series you are able to couple your system with this elements by a welding profile or a fork head. RG+ offers these suspensions in the following designs: GAB-( )-2 with one fork head on each site GAB-( )-5 with one fork head on one site and a welding profile on the other

Cantilever racking systems are highly load-bearing storage systems intended for storage of long and/or bulky storage materials. Such goods include timber, wooden boards, metal sheets, sections, beams or steel elements, building materials but also scrap cars and all kinds of heavy loads. Cantilever racking by OHRA is distinguished from standard racks using solid steel sections for all load-bearing elements. Thanks to this slim construction of our racks a high storage capacity can be achieved across a small floor space. There are specific types of cantilever racks for every product and for every industry. They differ based on requirements, height, useable depth, load-bearing capacity or section thickness. All cantilever racking are produced individually according to customer requirements; they are equipped with a high-quality powder coat or hot-dip galvanised for outdoor storage.

Our KIS slewing rings offer precise rotation technology to reliably connect two or more parts in your application. They are available in a wide variety of designs. As high load-bearing machine elements, they can safely absorb radial, axial and tilting moment loads with one bearing point and thus significantly reduce the effort required for the design of the adjacent construction. Sealed and lubricated, our slewing rings offer long-term performance even under demanding operating conditions. They are used in the fields of mechanical engineering, automation and robotics, among others. We are happy to work with you to develop the right slewing ring for your specific application requirements.

This rail guard system has been awarded national technical approval and is based on a lightweight aluminium design. This easy-to-use anchorage device with its integrated glider can be installed on walls, ceilings or roofs. A wide range of angular and curve elements are available to adapt your system to perfectly match your architecture. National technical approval ("abZ"): Z-14.9-807 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, D + CEN/TS 16415:2013 Secures 3 individuals simultaneously (1 individual per glider) High-strength aluminium design, extremely lightweight Simple and quick installation on a roof, wall or ceiling Expands and contracts with heat and cold based on a floating bearing design (straight systems) Rail element: 2.34 m; Optional: Custom lengths available Horizontal and vertical curve elements: Standard 90°; Optional: Custom angle/radius upon request