Results for
ANDREAS BERG STAHL- UND MASCHINENBAU E.K.
Germany
This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The TOPAZ Partfill is used, for example, in rainwater tanks or in tanks that should generally be filled as little as possible with city water. It ensures that in dry seasons the lowest required water level is automatically maintained with a partial fill. This allows the connected systems to continue operating while the tank has the maximum possible capacity for rainwater collection.
Request for a quoteTROTEC GMBH
Germany
A few practical benefits: Fragrance diffuser- for perfect well-being the B 25 E distributes the fragrance which you choose thanks to scented oil tank No clogging of the filter thank to integrated scented oil tank 4 fan stages- for individual setting for your needs Automatic switch-off by full water tank- reduce the power consumption Integrated Hygrostat with 5 humidity values- easy setting up of a well-being Filter change indicator Lime and germs remain in Filter Night mode with dimmed LEDs, for uninterrupted sleep Holder for Secosan Stick- keeps the water clean and uncontaminated 360° distribution of air- the humidified air is evenly distributed in the entire room Refillable with normal tap water- the distilled water is not needed Very quiet operation Big water tank – 3 liters Low power consumption Also suitable for workplace, because it is very stable despite of small and compact dimensions Filters in scope of delivery
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
ROJO float valve is a float-operated, mechanical plastic valve for automatic refilling of water storage tanks. All ROJO float valves can be mounted above or below the water surface. The ROJO is a good choice when a low flow rate is sufficient and the stainless design is an advantage. It should be emphasised that the valves have an automatic flow stop when disassembled for maintenance. The ROJO is also available as a low pressure model (HF models) with 60% more flow rate. All Jobe float valves come complete with float. We also carry the Compact ROJO variant, which has all the features of the ROJO even in small tanks.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
The multiple water quantity control system in modular design that is available in several versions fulfils not less than three requirements at the same time. It combines the advantages of the conventional water distributors, the impulse cooling systems and the continuously operating temperature control units while eliminating the disadvantages of each of these systems. The temperature control system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water quantity is individually set for each circuit at the central operating unit and - if necessary - is readjusted automatically via a water quantity regulation valve within adjustable limit values.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Water-sprinkled spray walls and spray booths with automatic paint sludge filtration system In wet separation, the overspray meets the water film of the spray wall and is thereby bound in the water. The sludge formed by this is discharged using sludge filtration systems. Water-sprinkled spray walls The overspray is sucked in in the lower area of the vertical water drain surface and is bound in water when it meets the film of water. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. In order to replace the water lost due to evaporation, it is recommended to fit an automatic water level controller. The entire quantity of water is fed to the automatic paint sludge filtration system via the disposal pump. A coagulant is added to the water by an automatic dosing unit, as a result of which the paint sludge in the circulating water is disbonded and can be separated more easily. The cleaning of the circulating water takes place in the separately arranged paint sludge filtration system. Depending on the paint system and plant version, the separation system is operated using a full or partial current method. Water-sprinkled spray walls/booths with underfloor paint mist extraction For the painting of large parts with a high paint throughput. The paint mist is sucked in under the grating cover. A substantial part of the overspray is already bound in the water by the constant sprinkling of the entire floor of the basin. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. Optimum capture of the paint mist is guaranteed by the laminar air flow inside the booth. A further advantage over comparable systems is the low water basin height and the associated low foundation depth. The sludge formed by this is discharged using sludge filtration systems. Advantages
Request for a quoteRIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Device for automatically blowing the adhering water off after passing through the pretreatment plant. The rotary blow-off zone is a device for blowing the adhesive water off workpieces that have been washed for the purposes of painting. It consists of a closed stainless steel sheet metal housing with forced ventilation and is employed immediately after the washing installation. In order to achieve more effective drying in the case of fissured surfaces, the blower nozzles are arranged on a rotary axis. The adhering water is blown off by the parts by air blown at high speed through the rotary blower nozzles. The effect of this is that no water droplets remain on the workpiece that could lead to slight marks in the paint film. Due to the varying blowing direction, the water is also blown out of problem zones and scooped parts in most cases. In order to be able to optimise the direction of the blower nozzle air jets, the nozzles have adjustable nozzle heads. The water that is blown off runs back into the pretreatment plant. The blowing air is extracted from the blowing tunnel via a return air duct with adjustable suction apertures.
Request for a quotePERKUTE MASCHINENBAU GMBH
Germany
A solid single-chamber parts cleaner for automatic water based spray cleaning. This series is extendable by varies extras which can be retrofitted. The RC-machine is a low costs entry to the modern world of industrial parts cleaning. The PERKUTE-system: economically - environmental – effektive Basic equipment Compact and sturdy construction Made of stainless steel Simple operation Space-saving 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Suction filter made of stainless steel front of the pump Adapter for steam extraction Basket drive by water pressure (RC 68, RC 82) Electronic basket drive (RC 122, RC 162) Preparation for electronic basket drive (RC 82) 2“ socket slide vlave for the tank emptying Safety limit switch at cover
Request for a quoteWALTHER TROWAL GMBH&CO.KG
Germany
FULLY AUTOMATIC CENTRIFUGATION FOR CLEANING YOUR PROCESS WATERThe PLC-controlled peeling centrifuges of the ZA range are your reliable aid for fully automatic process water cleaning. The sludge is separated in a rotating drum and automatically peeled off into a sludge tank. You can set the cleaning cycles individually. MODULAR DESIGN FOR INDIVIDUAL SOLUTIONS The ZA range features a modular design, allowing you to flexibly adjust it to your needs. Select the dirt and process water tank, available in a range of sizes, as well as the additional process water pumps, dosing units or a heat exchanger, suitable for both the ZA 04 and ZA 06 configurations. THE BENEFITS AT A GLANCE Centrifuges with up to 2,417 times the acceleration of gravity PLC for fully automatic operation Two configurations: ZA 04 with a cleaning power of 1,000 l of process water per hour ZA 06 with a cleaning power of 2,000 l of process water per hour
Request for a quoteResults for
Automatic watering - Import exportNumber of results
10 ProductsCompany type