Handling equipment - Import export

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible

Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification

igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread igubal® flange bearings were developed for the bearing of shaft extensions or shaft bushings. Like all igubal® products, they consist of an igumid G housing and an iglidur® W300 spherical ball. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Features igubal® flange bearings were developed for the bearing of shaft ends or shaft bushings. Like all igubal® products, it consists of a housing made of igumid G and a spherical ball in iglidur® W300. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Application area As the igubal® flange bearings are also suitable for dry operation, they are particularly considered for applications in which the installation site is difficult, in humid or wet environment, or with special demands on hygiene. Thus the igubal® flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in materials handling systems and in bakery equipment. igubal® flange bearing - Applications Installation According to type, igubal® flange bearing are designed for mounting with 2 or 4 holes. The 2-hole types are provided with oblong holes that enable a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error. Delivery program For shafts, igubal® flange bearings with 2 and 4 mounting holes are available in standard dimensions of 5 to 50 mm. For delivery times and more dimensions, you may please contact us. When to use it? When chemical resistance is required When a low-cost alternative is desired When dirt-resistant bearings are needed When misalignments should be compensated When fully split components are needed When not to use? When temperatures above +200°C prevail When an integrated collar is required When dimensions over 50 mm are needed When rotation speeds in excess of 0.5 m/s should be implemented igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread

Maximum bending freedom. The robotic bending technology combines the greatest versatility in manufacturing steps and simple handling. The robotic head is equipped with a clockwise and counterclockwise bending head, so that bending can happen in both direction once clamped. The eight synchronized and fully electric axes give maximum versatility when processing tubes. The bending process on tubes, including the processing at the ends and addon component can be done without any problems. The addon components can be positioned automatically, if needed. A radii/plane changer with up to 6 tools per bending system is integrated to give maximum flexibility..

COMFORT DEHUMIDIFIER TTK 52 EDiscreet on the outside, convincing values on the inside The dehumidifier TTK 52 E might look inconspicuous, but will impress you with its technical equipment and easy handling straightaway. Like almost all dehumidifiers of the HomeComfort series it comes with an automatic hygrostat-controlled dehumidification system including a compressor that switches itself off to save energy as soon as the desired humidity value has been reached. Conversely, the device is automatically activated again once the humidity value is exceeded. The desired humidity level can be set to target values of 40, 50 and 60 % RH via the LED-illuminated control panel. Alternatively, the TTK 52 E also allows for operation in continuous mode including unattended continuous operation – for instance, to keep smaller basement rooms or holiday apartments permanently dry. For this purpose, the device is fitted with a connection for an external condensate drain.

Nominal volume 240 L Nominal loading capacity 96 Kg + manufactured by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + produced from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, resistant to chemicals and temperature variations + emptied by a stepped comb-lift, shape A + quiet-running, solid rubber wheels, standard diameter 200 mm, also available with 250 mm diameter + corrosion-resistant, zinc-plated steel axle + all usual colours and combinations (e.g. grey, blue, green or yellow) available + ready to accommodate data carriers/transponders (chipnest) + marked with the appropriate noise level and the CE symbol in accordance with the regulations of directive 2000/14/EC + smooth surfaces facilitate easy cleaning + the lid is equipped with ergonomic handles + stacking ribs allow for high stacking + all parts of the wheelie bins can be recycled at the end of their useful life

Nominal volume: 770 L Nominal loading capacity: 310 Kg + from high-quality, high-density polyethylene (HDPE), manufactured by compact injection moulding process + complies with the regulations of DIN EN 840 and RAL GZ 951/1 + tested, monitored and marked with the GS symbol (Tested Safety) in accordance with the German Product Safety Act. + resistant to UV rays, frost, heat and chemicals + fits all standard lifting devices (DIN and comb-lifting); available with Ochsner handles from zinc-plated steel + equipped with quiet-running, solid rubber heavy-duty castors, 200 mm diameter, 360° swivel range, wheel stop as standard feature; also available with central braking system + corrosion-resistant, zinc-plated metal parts + available colours: grey, blue, brown and green, additional colours upon request; all colour pigments used are colour-fast + with chipnest as standard, to accommodate transponders/data carriers in accordance with DIN 30745 and RAL GZ 951/1

Nominal volume 1100 L Nominal loading capacity 440 kg + produced by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + suitable for both DIN and comb- lifting devices; the lifting trunnions for DIN devices are reinforced with steel inserts + 200 mm diameter quiet-running, solid rubber castors with 360° swivel range + standard equipment features 2 x footbrakes; available with central braking + all metal parts are zinc plated and resistant to corrosion + all colours, e.g. grey, blue and green, available + with integrated chipnest in the frontal comb to accept transponders/data carriers + well-positioned handles for convenient handling + standard equipment includes 2-inch water drain with locking plug + conforms to requirements of directive 2000/14/EC and displays the CE mark and appropriate noise level

Nominal volume 1100 L Nominal loading capacity 440 kg + produced by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + stepped comb-lift for maximum safety during emptying; optional emptying by lifting trunnions reinforced with steel inserts + 200 mm diameter quiet-running, solid rubber castors with 360° swivel range + standard equipment features 2 x footbrakes; also available with central braking + with integrated chipnest in the frontal comb to accept transponders/data carriers, compatible with common weighing and ID systems + all metal parts are zinc plated and resistant to corrosion + well-positioned handles on body and lid for convenient handling from all sides + standard equipment includes 2-inch central water drain in the base with locking plug

The magnetic Lifter /crane (magnetic hoist) uses high performance magnetic materials to make it smaller, lighter and more attractive. Unique magnetic circuit design, remanence is almost zero. The safety factor is high and the maximum pullout force is 3.5 times the rated lifting force. The handle switch is equipped with safety button, which can be operated by one hand and is convenient and safe. The bottom of the crane has a "V" groove design. The corresponding round steel and steel plate can be hoisted. No electricity, permanent magnetic force, safe use. It can be widely used in field operation, lifting and handling of steel, installation and handling of flat mechanical parts and various moulds. It is mainly used in the process of lifting, connecting, loading and unloading and handling of magnetic conductive materials of block, column and other parts. Especially for other lifting tools because of the inconvenience of fixed and laborious objects

-steel construction -fork sleeves for pick-up -also for straddle stackers secured by chain to prevent slipping -1 rotating hook -spray painted or hot-dip galvanized Types available -Type LA 1600/2400 rigid construction -Type LA 25 rigid construction , inclination 25°, with stirrups 100 mm ground leeway -Type LAT 25 inclination 25°, variable working height, can be fixed in each position, with stirrups 100 mm ground leeway

Types available Type LH-I -suitable for 1 fork sleeve or crane -can be secured to prevent slipping -with rotating hook -load capacity 1000 kg Type LH-II -suitable for 2 fork sleeves (also for straddle stackers) -can be secured to prevent slipping for different breadth of forks -with rotating hook -different load capacities

Individuality and problem-solving are our strengths The PERKUTE system offers solution for every requirement in industrial cleaning technology. Many special solutions could be developed because of the wide product range. We have compiled some reference examples of already implemented special solutions. Special Solutions/ application examples Conveyor machine TW 103 with handling equipment "For cleaning closing thrustor in time of the machine center" Conveyor machine TW 108 with return transport passage "Cleaning of synthetic material boxes" Dip facility TL - 70T "Cleaning of valve cases" Conveyor machine TW 101 with feed system and delivery "Cleaning of hollows" Spraying cleaning facility FR-130H "Cleaning of goods carrier" Spraying cleaning facility FR-90H "Cleaning of store cages in bulk baskets" Spraying cleaning facility RC 82 "Cleaning of drawing dies with with 100 bar"

The newly developed CinchSeal®series is applicable for machines in food production, screw conveyors and other bulk material handling equipment, in the pharmaceutical industry as well as in the chemical industry. It is made of 316 stainless steel or other material according to customer requirements. standard features ✔ lower maintenance due to unique self-adjusting design ✔ prevent leaks and material loss and protect gearboxes, bearings and shafts from damage ✔ mounting pattern suitable for standard bearings ✔ handles dry powders, pastes, slurries, and liquids ✔ USDA- and FDA-certified sealing products for use in meat, poultry, and dairy applications ✔ needs 30% less energy than packing seals ✔ temperature ranges -40 °C to 220 °C ✔ designed to accommodate longitudinal expansion and axial runout of the shaft ✔ pressurization with sealing air, 0.3 to 0.6 bar above the pressure of the operating vessel

In the ink jet segment the EBS 1500 is known for it's simple but efficient handling. The printer can get equipped with a bunch of different printheads, optional from 16 nozzles up to 128 nozzles. Expressed in font height this means from 6 mm up to 230 mm. With our EBS-1500 you can operate up to 6 printheads with one controller. This is a big advantage for companies with several parallel production lines. It is possible to print a different project with each head. It's even able to work with pigmented inks. This brings you the maximum contrast for difficult materials. The EBS 1500 combines word processing with graphics, barcodes and data matrix codes in an easy-to-use graphical user interface. With features such as IP54 protection and the ability to connect up to 6 print heads to one controller, this coder is the right tool for large production lines and harsh conditions.

mini smilift, allows you quick and frequent movement of loads of up to 60 kg either in cartons, boxes, and bins or as individual items such as plates and machined parts. This compact unit is light and flexible with one-hand-control for pick and place applications in frequent handling operations. It can be equipped with a range of attachments for use with many types of load in production, warehouse and despatch areas. mini smilift is easily and quickly installed and can be integrated into existing installations and work flows.

Traporol driven rollers are available in different versions depending on the type of drive. Whether single or double chain sprocket, drive via bead and dual bead or tooth belt drive. At Traporol you will find just the right solution for every application. This is how your intralogistics runs smoothly – regardless of the size and weight of the conveyed goods. Decisive criteria when choosing driven rollers are the weight and condition of the conveyed goods. In particular, conveying pallets and containers requires especially robust rollers, with a galvanized steel surface, for example.

For different pipes ø: 50-108 mm - Outside ø: 70-150 mm Guide discs made of galvanized sheet steel. Example of appication: Two-piece with clamping screws. For guiding pallets on roller conveyors.

The TransiTec discharge and metering device type DZR is a flat-bottom discharge device which is placed under cylindrical hoppers. The scraper arms provide for the flow of material and the continious feed of the dosing device(s) underneath. The discharge unit DZR can be installed under bag unloading stations as well as under container emptying stations, big bag emptying stations or buffer hopper. This discharge device for poor flowing and bridbuilding bulk materials consists of a cylindrical hopper with welded or boltet flat bottom. The cylindrical hopper ensures that the product flows evenly. An over the flat bottom rotating scraper, driven by geared motor, ensures a constant filling of the underlying dosing device or other aggregate (conveyor, screw, rotary valve, etc.).

This device consists of a hopper with an horizontally (or sometimes inclined) scraper, which avoids bridge building. At the bottom of the hopper, a metering device takes charge of the product and conveys it.

The TransiTec Big Bag filling stations are suitable as standard for filling big bags with a capacity of up to 2 tons. Various options are available to meet the required task. Also a calibratable weighing of the filled Big-Bas. The Big-Bag filling station offers a variety of options: - height-adjustable suspension frame - Tightening of the big bag by means of linear drive - Double big bag filling - vibration table for compacting the products, etc., ... to name just a few.

Our big bag emptying stations are generally designed for big bags with a capacity up to 2 tons. Different alternatives and options are available to meet customer’s requirements. In case of a big bag emptying station for bad flowing products, we can provide a vibrating frame as well as a massaging system with pneumatically operated cylinders to enhance the discharge (or a combination of both systems in the worst case). The design of this station will allways depend of the characteristics of the product which has to be discharged. The big bag emptying station is provided with a lifting frame, adjustable in height, with automatic big bag tension device which allows a completely emptying of the bag. How it works: by loosing weight during emptying, the big bag will be tensioned automatically by a telescoping spring system. Optionally, we offer the possibility to shut even partially filled big bags.