Driven rollers

Used for heavy unit goods conveyors Chain-driven and non-chain-driven Dimensions: Roller diameter 20 – 102 mm (3/4” to 4”) Shaft diameter up to 20 mm as standard (3/4”) Roller length up to 1,500 mm (60 ”)

Rollers PVC-STEEL rollers with resin polyamide PA or steel ACC pinion driven by tangential chain or chain with links in serie. The diagrams and tables on pages 66 and 67 show the dimensional characteristics and minimum and maximum lengths of manufacture. The rollers are produced in the following versions: with pinion integral to the jacket for continuous transport; with pinion clutch for stockpiling transport and in connection of machines operating at different speeds.

Stock conveyors can be produced as radial type according to the location of the facility, land conditions and customer demand. The Belt Conveyor chassis is connected to the ground from the tail module with a fixed joint. High-strength steel construction feet made to support the weight of the intermediate modules and the drive module are attached to the axle located on the wheels. These wheels are preferred as filled wheels in order to be loose-proof. The gearbox is driven by a coupled motor. It is equipped with a special brake system to prevent movement due to environmental effects during operation or stopping. The center of rotation is the fixed hinge point in the tail module. It is provided to turn clockwise and counterclockwise by the angle allowed. In this way, the stock amount is much more than a fixed stock belt conveyor.