Fluid - Import export

The braking fluid thermocouple from Therma convinces not only with its compact construction but also with its simple installation. Just screw it in in-place of the air vent screw to measure the temperature of the brake fluid. The subsequent sheathing line can then be comfortably bent in the required direction. When the thermocouple is screwed in, the braking system is then vented through its thread. The temperature measurement of the brake fluid, along with the brake disc surface measurement, also supplies important control values for a successful and safe race. During long races or races with many downhill routes, the brake disc overheats over-proportionally. The accruing radiation heat during this has a direct effect on the brake fluid, respectively heats it up. Depending on the type of brake fluid being used, it already reaches its boiling point at approx. 140–260 °C.

Lödige has years of expertise in continuous granulation. Nowadays, continuous ringlayer mixers are established systems for continuous granulation in many industries. However, until now the Lödige product range was missing a suitable dryer. The continuous fluid bed dryer closes this gap. Together with the ringlayer mixer CoriMix® and the customer-specific dosing system, this dryer provides a complete continuous granulation line: GRANUCON®. Dryer operation is based on the fluid bed process. A general disadvantage of continuous fluid beds is the wide retention time distribution within the machine. Lödige’s developers have looked into this problem and have found a solution: integrating a screw in the fluid bed dryer. This has a limiting effect on the retention time distribution. — Exchangeable floor — Quick screw removal — Integrated WIP cleaning — Individual purging of filter elements

The versatile Therma resistance thermometers convince with their precise measurement of fluids in the vehicle. They are optionally available with M6, M5 or M4 male threads. The technical equipment of the resistance sensor offers additional options. It is available as Pt100 or Pt1000, in Class A or optionally also as NTC 10 KΩ. This versatility ensures compatibility with motor sports products and controllers from Bosch. Screw-in resistance thermometer as Pt100 or Pt1000 or NTC 10KOhm

Self-Compensating, Rolling Diaphragm Technology, TPU Bellow Energy capacity 136 Nm/cycle Stroke 25.4 mm Hermetically sealed: The shock absorbers from the ACE Protection series PMCN have a compact, perfectly sealed cap as a special feature. This protection bellows, made of TPU (thermoplastic polyurethane), safely encapsulates the proven ACE rolling diaphragm from the outside environment. Aggressive cutting, lubricating and cleaning agents don't stand a chance and the function of the maintenance-free, ready-to-install shock absorber is retained. They are also available in full stainless steel. The PMCN series is a good alternative to the SP type air bleed collar if no compressed air is available on the machine or system. Reliable protection against aggressive fluids, these miniature shock absorbers are the first choice everywhere where conventional dampers wear out too quickly, eg. As in machining centers or other applications of mechanical engineering.

Self-Compensating, Rolling Diaphragm Technology, TPU Bellow Energy capacity 20 Nm/cycle Stroke 12.5 mm Hermetically sealed: The shock absorbers from the ACE Protection series PMCN have a compact, perfectly sealed cap as a special feature. This protection bellows, made of TPU (thermoplastic polyurethane), safely encapsulates the proven ACE rolling diaphragm from the outside environment. Aggressive cutting, lubricating and cleaning agents don't stand a chance and the function of the maintenance-free, ready-to-install shock absorber is retained. They are also available in full stainless steel. The PMCN series is a good alternative to the SP type air bleed collar if no compressed air is available on the machine or system. Reliable protection against aggressive fluids, these miniature shock absorbers are the first choice everywhere where conventional dampers wear out too quickly, eg. As in machining centers or other applications of mechanical engineering.

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design

Pump stray for streak-free monitor cleaning. • Cleaning spray for screens on computers, laptops, tablets, smartphones and navigation devices • Also suitable for cleaning glass surfaces, e.g. on copiers and scanners • Can be used with DRY CLEAN wipes product # 5734 • Contents: 250 ml

BK 0.5 US/K – BK 2.5 US/K (0.5 – 2.5 m² filter area) Dry cake discharge No fleece consumption compact systems are used for cleaning contaminated cutting fluids in metal processing and rolling mill operations. Cleaned cutting fluids have longer lifespan, improve the surface quality of workpieces or rolled goods, and help dissipate heat at the processing or forming location. Advantages: Fully automatic operation Excellent filtration results without fleece consumption Minimal carryover of cutting fluid Dry cake discharge Low maintenance requirements Full-flow filtration Maximum lifespan of cutting fluid Option for emergency operation with fiber fleece The cleaned cutting fluid is supplied to the system pump (A) from the clean tank (B) of the processing machine (C). The contaminated cutting fluid is introduced into the dirt tank (E) of the folding belt filter system through the lifting stations. The internal processing of the system consists of two steps: “Filtration” and “Regeneration.”

Vacuumfilters are used for the cleaning of contaminated cutting fluids in metal processing and rolling mill applications. Clean cutting fluids lead to longer tool life, improved surface quality of workpieces or rolled goods, and efficient heat dissipation at the processing or forming point. Advantages: Compact size Excellent filtration results Low installation effort Low maintenance requirements Affordable price Optional configuration without consumable filter fleece, with continuous filter belt, and washing device Significantly lower consumption of filter fleece compared to gravity filter systems during challenging filtration tasks and fleece operation Operating Principle: The contaminated cutting fluid flows through a piping system (1) and an inlet distributor (11) into the dirt chamber (2) of the underpressure filter tank.

Pressure belt filters are used for cleaning contaminated cutting fluids in metal processing and rolling mill applications. Cleaned cutting fluids have longer lifespan, improve surface quality, and contribute to heat dissipation at the processing or forming point. Advantages: High throughput capacity No backwashing during regeneration Easy discharge of filter cake Short regeneration time Compatible with various plastic filter belts High and low-pressure rinsing system Affordable price Operation: The F.E.S. pressure belt filter addresses the need for filtration without disposal issues by utilizing a standard feature of a circulating plastic filter belt. A filter belt cleaning device is integrated into the head section of the belt filter. The closing mechanism of the sealing flaps, lowered pneumatic cylinders, and movable protective covers ensure a low height for easy installation and operation.

ISO e PM 1 / F7, F9 stable, twosided hot meltsealed filter plates closely pleated filter media of homogeneouslystructured, microglass fibre paper INTERMELT pleating system rugged KALTHOFF filter casing of black plastic 25 mm flange profile suitable for low airflows and energyefficient operation very low pressure drop and consistent high efficiency high level of stability and low resistance performance airflowdirection, conditions for mounting and service optional at site

ISO ePM2,5ISO ePM1 / M6H13 stable, twosided hot meltsealed filter plates closely pleated filter media of homogeneouslystructured, microglass fibre paper INTERMELT pleating system rugged KALTHOFF filter casing of black plastic 25 mm flange profile low pressure drop and consistent high efficiency suitable for high airflows high level of stability and low resistance performance airflowdirection, conditions for mounting and service optional at site