Results for
LÖDIGE INDUSTRIES GMBH
Germany
The storage and retrieval vehicle is used for storing ULDs in racking. Equipped with a lift, the Elevating Transfer Vehicle transports ULDs vertically and horizontally at the same time. It is guided by rails which also supply the power needed. Flow plane: Horizontal and vertical Flow direction: Unidirectional Functions: Transporting, storing and retrieving ULDs Operating modes: Fully automated, semi-automated, maintenance Benefits: Three-dimensional handling Space-saving Minimal adjustments to make onsite A safe way to transport ULDs with care IATA-compliant transportation of ULDs
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Specially designed for lifting cars The PEGASOS garage car lift is a perfect solution for construction projects with limited space. It was specifically designed for lifting and lowering of cars and is based on a sophisticated design and a series of convenient features. It has the appearance of a garage and is the ideal alternative to a conventional ramp. The car lift brings vehicle and occupant automatically to the garage or parking deck. The PEGASOS can be mounted directly on the floor and therefore requires no pit. The platform can be equipped with a comfortable cabin or just a simple railing. Due to its compact design and the elimination of the machine room, it is easy to plan. The lifting function is realized by using a very silent and efficient electric motor. The transport of persons in the car is available upon request.
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Space-saving parking of one or two cars Park the car on the platform and let it magically disappear in a pit The car scissor lift VERTICAR from Lödige is a perfect solution for parking one or two cars in a very confined space. A significant advantage of VERTICAR is minimum space requirement. This is successfully achieved through the integration of the machine into a pit. Thanks to an overhead canopy, a flat and even surface is provided and the lifting table, i.e. the parking position is fully covered. As a result a vehicle is parked in a pit and the overhead surface remains completely intact. Furthermore, as it requires a low installation height, a classic shaft is not necessary. Benefits of the car scissor lift Saves on construction space as a ramp is not required Creates two car parking spaces in even the tightest locations Safe operation with fingertip control Bio-oil used to protect the environment
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors
Request for a quoteLÖDIGE INDUSTRIES GMBH
Germany
Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.
Request for a quoteBERNSTEIN AG
Germany
Our SEL series door contacts offer you a particularly long mechanical service life. They are available in three different versions with separate actuator. You can also choose between four different actuator variants. Due to its elastic design of the contacts, the contact plates are mechanically moved with each actuation; this causes a cleaning effect by the actuator. Dirt, dust, and possible oxide layers are rubbed away – the electrical contact is made reliably. — Door contact with contact plates or contact pins — Mechanical lifetime: more than 10 million switching cycles — Protection class IP20
Request for a quoteSTRONG MAGNETS GMBH
Germany
The corrosion resistance of Neodymium magnet is considered poor, surface coating is highly recommended for Neodymium magnets. With the expansion of elevators, wind turbines and permanent motors application, the users need higher requirement on corrosion resistance of Neodymium magnet, as the glue cohesiveness of unplated magnet is much better than plated magnets, also unplated products are better in the security. Now, more and more customers tend to use unplated magnets, upon this condition we have developed ultralow weight loss magnets after the continuous innovation and study. Normally, the weight loss test is over 150mg/cm² in the industry of Neodymium magnet, this will be different for magnets produced from different material formulation and manufacturing process. A lot of our new magnets can reach to 1mg/cm², (Testing condition HAST standard for 168hrs), due to its very low weight loss, the corrosion resistance is excellent
Request for a quoteGORACON SYSTEMTECHNIK GMBH
Germany
The explosive developing progress concerning technical equipment of buildings and arrangements, has contributed in last decades a lot to the reduction of the environmental impact, with at the same time rising comfort of utilisation. In parallel in addition the rising claims which refer to their servicing, care and maintenance arise steadily. A factor which is dependent particularly in the undeveloped outskirt area on economic solutions in the height access technology. While the rational care of the facade stood already of here as a function of practical height access technologys, today are required on wide level height access technologys which can also enclose assembly works and services with the accordingly higher charges and big work platform lengths with. Hence, transportable arrangements from goracon were conceived for individual application situations, under inclusion of an easy and quick change of location.
Request for a quoteGORACON SYSTEMTECHNIK GMBH
Germany
In this case, the innovation lies in that the concrete towers are built from the inside. in the traditional assembly the concrete tower is scaffolded from outside and then refi tted part by part. Not only is this extremely timeconsuming during the assembly, but also the setup of these scaffolds binds precious time resources and tower crane capacities. During the assembly of concrete segments with the Gplatform , the platform is connected inside the fi rst concrete ring by a mobile crane, in compliance with the requirements for passenger transport. If the following concrete tower segment is attached, the crane has already been positioned properly in order to elevate the Gplatform to the next level. After lowering the crane gear, the Gplatform is inserted and pulled to the next tower section. During the upward movement, the assembly operators must not leave the Gplatfom.
Request for a quoteGORACON SYSTEMTECHNIK GMBH
Germany
The traction sheave hoist Gtrac admitted for the personal transport the costly scaffolding of a lift shaft is to be eliminated suitably. The lifting gear technology on the cabin roof is installed by tailormade adaptation, so that this can be used as a working platform. About an upper and lower pulley the resigning traction rope is led without ground touch and is free of soiling. As a safety barrier serves as a rule security brake belonging to lift. Security facilities like final disconnection, Overlooking and a supervision whether rope to end is, guarantees a reliable and sure function.
Request for a quoteGORACON SYSTEMTECHNIK GMBH
Germany
Save time when ascending to carry out maintenance and repair work to your turbine. With a Gservicelift you can complete a 100 meters ascent in approx. 5 minutes. Without a Gservicelift on the other hand, the arduous climb requires very much more time and demands a lot of strength. But this is not the only argument which clearly speaks for itself. Heavy tools and loads up to 400 kg can be transported comfortably with a Gservicelift, and all this with automatic transport, which does not take up the costly time of your personnel for the ascent. It is well proven, that wind power plants with an integrated ascent system have a higher level of availability and that the quality of your turbine maintenance will increase enormously.
Request for a quoteABS SAFETY GMBH
Germany
Specially designed for working on mobile elevating work platforms (in accordance with CNB/P 11.074), this lanyard is based on a robust strap and includes an integrated energy absorber, a carabiner hook for attaching the lanyard to your personal protection kit and a pipe hook. Is it 1.8 m long and can be flexibly adjusted. For individuals weighing up to 140 kg. EN 354:2010 & EN 355:2002 CNB/P 11.074 (for implementation on a mobile elevating work platform) Adjustable length: 1.4 m - max. 1.8 m Max. 140 kg (incl. the user's clothes and equipment!)
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
mechanical belt connectors for use with most PVC, rubber and steel elevator belts, e.g. Supergrip belt connectors Easy to install system with 50 mm segment widths Four versions for up to 1,250 kN/m without limiting belt strength Max. temperature 80ºC, lock nut with nylon insert (standard) Type BC belt connector for steel mesh belts Four versions for up to 2,500 kN/m belt tensile force Maximum stability using high load bolts with self locking nuts Top quality construction in steel and extruded aluminium
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
FTK Förderband Technik Kilian GmbH supplies all known types of elevator bucket bolts concave head bolts as per DIN15237, Ref 70, Fang and Easyfit bolts are manufactured at production facilities in Europe. Because of our large manufacturing volumes and stocks, we can offer you attractive prices and minimal delivery times.
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
FTK Förderband Technik Kilian GmbH has the second largest range of elevator buckets. With more than 400 bucket types and sizes, we have a bucket for every product and application. Elevator buckets in regular & stainless steel (deep drawn or welded) Synthetic elevator buckets (nylon, HDP or polyurethane) Elevator buckets for agricultural applications (e.g. grain, seed, mixed feed, sugar) Elevator buckets for industrial applications (e.g. cement, gypsum, aggregates, coal, artificial fertiliser)
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
FTK Förderband Technik Kilian GmbH has a wide range of elevator belts for all applications. The range includes the following belt types anti static, abrasion resistant, high temperature, oil resistant and flame retardant, and steel mesh belts for the harshest environments. The belts are made to customer requirements.
Request for a quoteBEZNER ANLAGEN- UND MASCHINENBAU GMBH
Germany
When your production or recycling process includes different levels in height or your facility is compact, implementing a state of the art elevator conveyor is an efficient solution.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Elevator - Import exportNumber of results
17 ProductsCompany type