Results for
WESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
We supply the European and international market with cold heading wire / cold extruding steel in sizes ranging from 1.5 mm to 42 mm Production is based at the Hamm and Iserlohn sites, focussing on the following products: Cold heading wire / cold extruding steel Tempering steel Quenched and tempered steels / AFP steels Prehardened steels
Request for a quoteBS STEELWORKS GMBH
Germany
Cold rolled steel sheets are produced by re-rolling process of hot rolled steel sheets in order to provide precise thickness distribution across the coil. The surface roughness of the cold rolled materials is lower compared to hot rolled steels and suitable for painting and coating applications. According to the customers demands, it can be supplied in coil, slitted and cut to length sheet form. Our stock includes cold rolled steel sheet materials produced according to EN 10130, EN 10268, EN 10338, EN 10209 and others.
Request for a quoteBS STEELWORKS GMBH
Germany
Cold rolled steel is low carbon steel produced by a "cold rolling" process and processed at near normal room temperatures. Cold rolled steel offers superior strength and machinability. Cold rolled steel sheets are often used for engineering products where close tolerances, concentricity, surface smoothness and coated surfaces are required.
Request for a quoteROLLON GMBH
Germany
The Easyslide is a system of cold drawn steel linear rails with induction hardened raceways. The linear guides consists of an external 'C' profile linear rail and incorporated caged ball bearings. Five rail widths: 22, 28, 35, 43 and 63mm The sliders inside the linear rails ensure an exceptionally compact system System high load capacity Optimal operation even when shocks and vibrations are experienced Multiple standard lengths available depending on the linear rail section (up to 2,000mm). Special lengths are available on request The Easyslide product family includes compact size linear rails with caged ball bearings, fitted with one or more sliders per rail, to ensure high load capacity and long life. If more than one slider is used in the SN series, they can slide independently inside their own cages, or simultaneously in a single cage. The SNK series features rails with hardened and ground raceways. Variable slider strokes and lengths can be selected. All Easyslide linear...
Request for a quoteSCHMALE MASCHINENBAU GMBH
Germany
Special machines from Schmale Maschinenbau are equipped with an intelligent combination of technologies. The plant shown above is used to manufacture reinforcement items from solid material with a diameter of 20mm for the building industry. Servo-electric units such as bending slides, presses and finger benders are combined into customer-specific solutions for the production of individual items that can not be produced on standard machines. Schmale offers special machines for wire, tube and strip processing. You can watch various special machines for the production of different forming articles on our YouTube channel. https://www.youtube.com/channel/UCziuQiA3kXBVfH4ecLxQ2JA/videos
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
EN 10149-2 Thermomechanically Rolled Steels : S315MC, S460 MC, S 500MC, S 700MC EN 10149-3 Normalized or Normalizing Rolled Steels : S260NC – S 420 NC
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...
Request for a quoteVOM HOFE KALTSTAUCHDRAHT GMBH
Germany
Experience the pinnacle of formability and strength with cold extrusion steel from Vom Hofe Kaltstauchdraht GmbH. Our cold extrusion steel embodies the ideal combination of advanced technology, top quality and outstanding performance for demanding applications. Outstanding formability and strength for versatile applications: Our cold extrusion steel is characterised by its impressive formability and strength, making it the perfect choice for a wide range of applications. Whether in the production of fasteners, drawing parts or other demanding components - our cold extrusion steel fulfils the highest requirements.
Request for a quoteBS STEELWORKS GMBH
Germany
Hot rolled steel is a type of steel that is formed by the hot rolling process at a temperature above its recrystallization temperature. Steel is easier to form at this elevated temperature. Compared to cold rolled steel, hot rolled steel does not usually require heat treatment after forming. Hot rolled steel usually has more mill scale than cold rolled steel.
Request for a quoteVOM HOFE KALTSTAUCHDRAHT GMBH
Germany
Our wires stand for innovation, variety and top quality - characteristics that are characterised by our many years of experience and our commitment to excellence. Our product range covers a wide spectrum of wires in various grades, surfaces and designs. From spring steel wire to stainless steel strips and cold heading wires, we offer solutions with diameters ranging from 2.00 to 37.00 mm. This impressive variety enables us to offer customised wire products that meet the individual requirements of our customers.
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
Westfälsche Drahtindustrie GmbH uses highly efficient plant technology at its Salzgitter site to produce cold-ribbed reinforcing steel (CR) in rings and coils, as well as structural steel mesh. Thanks to special wire rod primary material for our CR products, which we have developed in close cooperation with our suppliers, our reinforcing wire achieves first-class technical values, particularly in terms of elongation and the Re/Rm ratio The advantages for the user: easy processing and dimensional accuracy of the hangers. Seamless quality monitoring from the wire rod to the finished product by our own quality centre and our external monitoring centre (MPA Dortmund) guarantees the highest level of lasting quality and safety.
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
Westfälsche Drahtindustrie GmbH uses highly efficient plant technology at its Salzgitter site to produce cold-ribbed reinforcing steel (CR) in rings and coils, as well as structural steel mesh. Thanks to special wire rod primary material for our CR products, which we have developed in close cooperation with our suppliers, our reinforcing wire achieves first-class technical values, particularly in terms of elongation and the Re/Rm ratio The advantages for the user: easy processing and dimensional accuracy of the hangers. Seamless quality monitoring from the wire rod to the finished product by our own quality centre and our external monitoring centre (MPA Dortmund) guarantees the highest level of lasting quality and safety.
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
Westfälsche Drahtindustrie GmbH uses highly efficient plant technology at its Salzgitter site to produce cold-ribbed reinforcing steel (CR) in rings and coils, as well as structural steel mesh. Thanks to special wire rod primary material for our CR products, which we have developed in close cooperation with our suppliers, our reinforcing wire achieves first-class technical values, particularly in terms of elongation and the Re/Rm ratio The advantages for the user: easy processing and dimensional accuracy of the hangers. Seamless quality monitoring from the wire rod to the finished product by our own quality centre and our external monitoring centre (MPA Dortmund) guarantees the highest level of lasting quality and safety.
Request for a quoteBS STEELWORKS GMBH
Germany
Galvanized steel coils are cold rolled sheets coated with Zinc. According to customers need, can be supplied as coil, slitted or cut to length form. Our stock includes generally materials produced according to EN 10346, also other special grades.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WALTER STAUFFENBERG GMBH & CO. KG
Germany
Performance The patented STAUFF Form tube forming system is without doubt one of the most high-performing solutions currently available on the market for connecting metric sized tubes. Apart from its simplicity, it also provides a maximum level of safety, reliability and reproducibility. STAUFF Form has been designed as standard for seamless cold-drawn precision steel tubes as well as stainless steel tubes with dimensions between 6 x 1.5 mm and 42 x 4 mm in the Light Series and between 6 x 1.5 mm and 38 x 6 mm in the Heavy Series. Parameters for alternative materials (copper, brass, CuNiFe, Tungum etc.) can be added by the manufacturer, if required. System Design and Components The system is based on standard parts and consists of only four key components: The STAUFF Form Ring with an integrated and thus undetachable elastomeric sealing is slid onto the tube end, which has previously been mechanically contoured. This creates a positive-locking connection that provides a...
Request for a quoteABS SAFETY GMBH
Germany
This stainless anchorage point can be installed on a range of different seams and is available in two models. Simply install this anchorage device from above using the stainless steel blind rivets provided. We also supply models for usage as an intermediate bracket or T-junction in a lifeline system. EN 795:2012, A + CEN/TS 16415:2017 Sandwich and trapezoidal sheeting (cold roofs) For steel plating ≥ 0.45 mm; Aluminium ≥ 0.8 mm Distance between the holes: 180-250 mm / 280-333 mm Installation materials included
Request for a quoteARNTZ GMBH + CO. KG
Germany
Engineered for : • Stainless steel • Heat resistant steels • Cold and hot working steels • Hardened steel up to 1900 N/mm2 • Nickel based alloys • Aluminium-silicon alloys • Copper-nickel alloys • Titanium and titanium alloys • Exotic, hard to cut alloys
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4571 (X6CrNiMoTi17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: round Material: 1.4305 (X8CrNiS18-9) Type of production: cold drawn Surface finish: bright Standard: EN 10088 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 3 - 100 Length (mm): 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: hexagon Material: 11SMn30 (1.0715) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010304 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 13 - 50 Length (mm): 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: flat Material: S355J2C (1.0579) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010301 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 10 - 50 Length (mm): 6,000 Width (mm): 40 - 120
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: flat Material: S235JRC (1.0122) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010301 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 2 - 80 Length (mm): 3,000 - 6,000 Width (mm): 10 - 300
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: round Material: 1.4104 (X14CrMoS17) Type of production: cold drawn Surface finish: bright Tolerance: h9 Standard: EN 10088 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 6 - 60 Length (mm): 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: round Material: 1.4057 (X17CrNi16-2) Type of production: cold drawn Surface finish: bright Standard: EN 10088 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 20 - 60 Length (mm): 3,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of production: cold-rolled, 2G Surface finish: ground Grain: 240 Ground sides: both sides Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 1.5 - 5 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Foliation: Foil 4228, laser protection foil
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 0.8 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteResults for
Cold steel - Import exportNumber of results
72 ProductsCompany type
Category