Air connections - Import export

WIWOX® MT micro blasters are used for precise blasting with blasting nozzles from 0.4 – 1.8 mm. Surfaces can be smoothed, matted, deburred or cleaned. All mineral media, e.g. glass beads, broken glass, corundum, silicon carbide in the grain size range from 0 to 300 mμ serve as blasting media. The abrasive is used only once. The blasted surface is reproducible. Only a compressed air connection is required to operate the equipment. Micro-Tip fine blast units are suitable as portable free blast units or in combination with a blast cabinet. Micro-Tip fine blasting technology is available as a pressure or injector process. All units are equipped with foot pedal, pressure regulator, manometer and carbide nozzles.

Correct ventilation is not only an important prerequisite for a pleasant working environment, work protection provisions and regulatory directives make it mandatory in many areas.Proper room ventilation conducts harmful fumes and substances out of the room. The high pressure centrifugal fan TFV 100 is well-equipped for tasks such as transport of up to 4,000 m³/h air, even over longer distances and with back pressure.Owing to its extreme robustness, it is able to handle harsh working environments efficiently.The TFV 100 is available as standard model and additionally as a hire model. Benefits in practice: Extremely robust models with a high flow rate Splash proof type A (IP55) Deployment also possible in very dusty rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Stable characteristic curves and constantly high pressure

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

TTK 24 E Dehumidifier The dehumidifier TTK 24 E convinces with its dehumidification performance of up to 10 litres a day and is well suited for keeping dry small, heated rooms, for example hobby rooms. Special features: Automatic dehumidification performance Excellent design Very easy handling Overflow protection with automatic power off Washable air filter Connection for extern condensate drain Technical details: Dehumidification performance max.: 10 litres/24h Air flow rate: 100 m³/h Suitable for rooms up to: 15 m² / 37 m³ Operating range temperature: 5 - 32 °C Operating range humidity: 30 to 90 % r.F. Input voltage: 230 V / 50 Hz Power input: 0.25 kW Water tank: 1.6 litres Sound level dB (A): 42 Dimensions (l x w x h): 298 x 354 x 493 mm Weight: 10.1 kg

The complexity of hydraulic systems is continually increasing. As a result, the purity of the installed components is becoming more and more significant. This applies not only to pumps and valves, but also to the pressure lines that connect them. The ptcsystem® is easy to handle. It provides effective protection against initial damage and premature component wear. Compressed air at a pressure of 6-8 bar is used to route a cleaning projectile through the lines needing to be cleaned. The cleaning of complex bending geometries is possible. The chrome-plated launcher made of high-strength aluminium is an extremely durable tool, even under the toughest working conditions. Using a balancer, it can be hung up such that it is always ready to hand. With its ergonomically designed handle and rotatable compressed air connection, the ptcsystem® launcher is also suitable for cleaning small product series.

Combination of air breather and water removal filter with integrated check valves to increase the lifetime of the desiccant material; particularly suited for gearbox applications Features ▪ Available in 4 different sizes with diameter of Ø68 mm / Ø2.68 in, Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Equipped with spring-loaded check valves in opposing directions with an opening pressure of 0,01 bar / .15 PSI ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element

Combination of air breather and water removal filter Features ▪ Available in 4 different sizes ▪ Diameter of Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) on Stainless Steel tube ▪ Available with adaptor plate to simplify installation and to enable the use of a visual contamination indicator ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element

Cellular wheel sluices Cellular wheel sluices are used as discharge devices under filters, cyclones and silos, as well as for channelling materials into pneumatic conveying systems. In a special tested version, however, these can also be used at the same time for the explosive decoupling of complex plant systems in the sense of the ATEX regulations. Multi-cutter The multi-cutter is ideally suited for the chopping up of paper or plastic waste strips as well as veneer residues in extraction pipes. It works with a set of fast-rotating, but air-permeable blades. The connection diameter is DN 160 and the motor has a rated drive power of 0.75 KW. In order to be able to definitely assess the usability for the application, it is advisable to provide us with representative material samples. The assessment is also often proven by pilot plant trials. The advantage of this is that the degree of chopping can also be determined. ATEX non-return valves (EX) Non-return valves are passive decoupling elements in pipelines for preventing dust explosion effects from running in the opposite direction to the conveying direction. The non-return valves are type-tested protective systems in accordance with directive 94/9/EC, better known under the synonym ATEX 95. Function In normal operation, the top-mounted flap swims on the air stream in the housing of the non-return valve and in this way is held open. At a standstill the valve flap closes under its own weight and rests on the diagonally cut inflow pipe. If an explosion occurs behind the non-return valve, the air flow direction is reversed due to the increased counter-pressure. This causes the flap to close. The valve flap is additionally pressed against the inflow pipe by the pressure of the explosion, thus reliably sealing the pipeline against an explosion backdraught. These non-return valves function without external energy. The RSK and BPF-M series are available in the sizes DN 160, 200, 250, 280, 315, 355, 400, 450, 500, 560, 600, 630, 710, 800, 900 and 1,000. The two series differ in that they have different versions and application possibilities. The non-return valves, as type-tested protective systems, are sold through Brilex Gesellschaft für Explosionsschutz mbH, Hinterm Gallberg 15-17, D-59929 Brilon; www.brilex.de

installation of bagtype filters, panel filters, compact filters, filter pads, HEPA filters and activated carbon cartridges 30 mm air duct flanges connecting duct to upstream and downstream side tightly closing, lateral maintenance door with hinges and sash lock fasteners spacesaving simple toolfree filter change maintenance door optionally in right or left air direction

3 sizes for marking of flat glass panes and Hollow glass bodies with logo's or lettering, max. 25,38 and 54 mm diameter! The device consists of in detail 1 tank made of sturdy steel plate, 6 liters. Contents, 3 feet, mounting bracket, lockable Fill cap for the blasting agent (corundum), and overpressure nozzle with filter element Needle felt (easy to replace). 1 special blasting gun with built-in injector nozzle, and venturi wide mouth – blasting nozzle and Compressed air connection nipples. 1 special distribution head for receiving the stencil, which are rapidly renewable, and the Recycling of the blasting agent in the container or in the filter element. 1 set = 4 pcs. Connecting hoses between blasting gun and containers or distribution head and the container.