Bonding - Import export

secutex – the gentle power against raw impact forces. If screwing or welding is not possible, just glue the secutex where impact protection is required. No problem with the secutex special bonding material. These are the advantages by gluing (nearly) everywhere applicable No drilling or welding necessary Bonding where welding or screwing is impossible Applications Thin to medium thick wood plates Glass and plexiglass Sound absorbing elements Fine wood surfaces Examples Coolhouses Painted, laminated, veneered walls and surfaces According to special requirements A proper bond requires always a good preparation … The following procedure is needed 1. Cleaning of the surface Suitable grease and siliconedissolving cleaning agents are required. This step is important to ensure that there is no dirt on the surface which may be present during the grinding or sandblasting process. 2. Roughening the surface Sandblasting or grinding of the surface are especially suitable here.

Our ovens and line concepts for bonding and finishing of nonwovens stand for maximum production output, low energy consumption and highest precision regarding temperature distribution, air circulation and coating application. We can offer different application systems such like foam impregnation units, padders, spray cabinets, powder scattering units, coating heads and many others. In addition, we can offer complete lines like airthrough doublebelt thermofusion ovens, airthrough dryers for lightweight nonwovens, airthrough dryers for high speed spunlace lines for wipes or wetlaid nonwovens. Our customers are active in the fields of hygienics & medicine, construction & geotextiles, clothing & comfort, cleaning & care, automotive & transport, filtration and many more.

We have successfully adapted many of the adhesion promoters (developed for the Coil Coating process) for spray and brush application. Various adhesion promoters for NR, NBR, HNBR, EPDM, SBR, FPM, PVC, PP, ABS, PA, PU, TPE... are available.

Rubber-to-metal bonding Our adhesive build-up provides strong bonding between our metal carrier and your rubber. With our know-how, we are able to bond a wide variety of compounds such as NBR, CR, EPDM, SBR etc. for you. Plastic-to-metal bonding Whether PC (polycarbonate), PVC (polyvinyl chloride), ABS (acrylonitrile-butadiene-styrene), CAB (cellulose acetobutryate), PP (polypropylene), TPU (thermoplastic polyurethane), PA (polyamide) and polyolefinic plastics or other thermoplastics as well as duroplastics - we ensure that you achieve optimum adhesion between the plastic and our metal carrier.

Amroc-Panel - the monolithic cement bonded particle board Depending on the production process, cement bonded particle boards are classified into multi or single layered panels. Especially when exposed to moisture, multi-layered panels have a tendency to delaminate, i.e. the individual layers lose their bond from each other. We are the only manufacturer with the ability to produce a monolithic cement particle panel that is completely resistant to delamination. The Amroc-Panel provides an unmatched level of construction quality for all exterior and interior applications with variable moisture exposure. All our products are manufactured as a single layer panel and are based on the B1 product. Consequently, all technical specifications and characteristics of the A2 panel also apply to all other products or product versions.

Dymax Ultra LightWeld® 9501F is a UV/Visible lightcuring adhesive optimized for electric vehicle battery potting and bonding. Features: - Cure using UV/Visible light or LED - 385 nm LED Curing - Blue Fluorescing technology for bond line inspection - One part formulation – no mixing - Solvent free Excellent adhesion to metals & plastics

Dymax Dual-Cure 9014 encapsulant is formulated to cure primarily with UV light and includes a secondary moisture curing function for applications where shadow areas exist on printed circuit boards. Features: - Cures with UV/Visible light - Dual Cure secondary moisture cure capability - Fluoresces blue under black lights - Flexible

Highperformance conformal coating with secondary moisture cure for shadow areas. Features: - Cures with UV/Visible light - DualCure secondary moisture cure for shadow areas - Fluoresces blue under black lights - Excellent thermal shock resistance - High temperature flexibility - Excellent chemical and corrosion resistance - Good temperature/humidity (85/85) performance - One part formulation no mixing - Solvent free - Fast tackfree cure - Halogen free - MILI46058C Approved

Dymax MD® 1040M is a versatile autoclave resistant adhesive, coating and encapsulant resistant to numerous cycles of sterilization. Features: -STERRAD and autoclave resistant of 100+ cycles, including nonyellowing - Low water absorption 0.5% - UV/Broad Spectrum and LED curable at 365nm - Compliant with ISO 109935 Cytotoxicity - IBOA free (a known skin irritant) - Compliant with RoHS directives 2015/863/EU - Solvent free

MD® 250CTH epoxy is designed for rapid assembly of medical devices with flexible curing options using light only, heat only, or combination of the two. Features: - Cures with UV/Visible light - Secondary heat cure at 8085°C - Flexible light and heat cure - Semiopaque white color - Volumetric shrinkage at 1.3% - High modulus and durometer - No nonreactive solvents - Compliant with ISO 10993

LED Optimized medical adhesive for plastics and metals. Features: - LED optimized for 385 nm / 405 nm - Fast cure - Fluoresces blue under black lights - Low viscosity for improved wetting - Resists yellowing - Superior water resistance - Compliant with ISO 10993

Cora®Oil is an oleophilic polyster fleece and a unique technical innovation! Cora®Oil is a high quality thermally bonded polyester nonwoven and capable of separating oil and water. This allows oils to be completely filtered out of water. Another advantage: Cora®Oil can be used in all common band filters.

Run-in lubrication in combination with oil or grease lubrication Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds Dry lubrication in dusty environment, to avoid adhesions Coating of punching tools Advantages and benefits Highly effective due to good adhesion to prepared substrates Allows a low coefficient of sliding friction also under heavy loading Increased wear protection Radiation and vacuum-resistant Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs

Run-in lubrication in combination with oil or grease lubrication Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds Dry lubrication in dusty environment, to avoid adhesions Coating of punching tools Advantages and benefits Highly effective due to good adhesion to prepared substrates Allows a low coefficient of sliding friction also under heavy loading Increased wear protection Radiation and vacuum-resistant Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs Also available as spray version OKS 511

Cora®Spun is a high-quality polyester spunbond, which is thermally bonded and has a high tensile strength in the longitudinal and transverse direction. It is a suitable universal medium for surface filtration and precoat filtration.

Photovoltaic (PV) Solar Power converts light from the sun directly into electricity via the photoelectric effect. Aluminum makes an ideal substrate material to support the thin film of photovoltaic solar cells, as well as a safe, attractive housing for the absorber. Its lightweight nature makes the units easy to move, and its resistance to corrosion extends the lifespan of the units. Sheet-rolled, bonded industrial aluminum can also make an effective support for PV units.

Dry lubrication of the most varied materials sliding on top of or rubbing against each other (such as metals, wood, ceramic, rubber, and also adhesives or paintable plastics) Anti-stick coating of seals or sealing surfaces of all kinds to prevent sticking-on To cure the squeaking noises of soft on hard materials For water-repellent impregnation of absorbent materials Separating film in cast resin applications Advantages and benefits Dry, non-soiling film Highly effective due to good adhesion to prepared substrates Colourless and odourless low-friction coating with non-stick properties Prevents frictional corrosion Dries at room temperature Also available as spray version OKS 571

The thermally and mechanically bonded polypropylene fibres of the Cora®Pro nonwovens ensure very high strength and enormous dimensional stability despite the low surface weight. They have good chemical resistance.

Dry lubrication with solid lubricants for long-lasting efficiency at low sliding speed and with high surface pressure Long-term lubrication with excellent protection against wear for increased service life of slide areas Fully effective even after longer downtimes; no adherence of dust and dirt Advantages and benefits High-strength long-term antifriction bonded coating with high efficiency through good adhesion on prepared surfaces Constant friction value of the sliding film even under extreme load Increased protection against wear of otherwise not accessible slide areas

Dry lubrication of most different materials sliding on resp. rubbing against each other like metals, wood, ceramics, rubber as well as paintable plastics For packing machines, sliding areas in the plastics and textile industry, rollers and chutes in the transport range, etc. Non-stick coating of all kinds of sealings and sealing areas to avoid sticking, squeaking of soft on hard materials (e.g. rubber on glass), for water-repellent impregnation of absorbing materials or as separating film for casting resin applications Advantages and benefits Thin, tack-free separating film with very good adhesive properties on prepared surfaces Best suitability for low-friction lubrication of all kind of materials in contact Colourless and odour-free antifriction coating with non-stick properties

Dry lubrication of the most varied materials sliding on top of or rubbing against each other (such as metals, wood, ceramic, rubber, and also adhesives or paintable plastics) Anti-stick coating of seals or sealing surfaces of all kinds to prevent sticking-on To cure the squeaking noises of soft on hard materials For water-repellent impregnation of absorbent materials Separating film in cast resin applications Advantages and benefits Dry, non-soiling film Highly effective due to good adhesion to prepared substrates Colourless and odourless low-friction coating with non-stick properties Prevents frictional corrosion Dries at room temperature

Features: - Fast cure with LED (385 nm) or UV/Visible light - See Cure dispenses blue, cures clear - UltraRed® fluoresces bright red - One part formulation - No nonreactive solvents - Compliant with ISO 10993

Dry lubrication for applications where pastes or powders have been used up until now Chain lubrication of heavily loaded chains in temperature ranges in which oil or grease lubrication is not possible For example, in annealing, stoving and baking ovens for aluminium tube manufacturing, in painting systems or in baking lines Advantages and benefits Hygienically harmless as defined in German LFGB Approved by Nuremberg LGA for use in food processing technology NSF H2 registered Economical due to low consumption Optimum wear protection at high pressures and extreme temperatures Can be mixed with water in ratio of up to 1:5

Dry lubrication with solid lubricants as longer-acting reserve layers in area of low sliding speeds subject to high surface pressures and pre-determined sliding paths Wear protection for increased service life of sliding surfaces Fully effective even after longer standstills Resistant to high temperatures, no adhesion of dust and dirt Advantages and benefits Highly effective due to good adhesion to prepared substrates Consistent coefficient of sliding friction under maximum loading of sliding film Wear protection of sliding points that can otherwise not be lubricated is possible Firmly adhering, pressure and temperature-resistant dry lubricating film

Lifetime lubrication of metal-to-metal connections at low to medium rotational speeds and high loads Run-in lubrication in combination with oil or grease lubrication Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements Dry lubrication at high operating temperatures (up to 450°C) Dry lubrication in dusty environment, to avoid adhesions Advantages and benefits Highly effective due to good adhesion to prepared substrates Allows a low coefficient of sliding friction also under heavy loading Very thin layer thicknesses possible Increased wear protection Rapid curing at room temperature Shortens and improves run-in conditions of friction bearings, toothing and other sliding pairs

Dymax 2022-MW is a versatile general bonding adhesive, coating, and encapsulant formulated without IBOA (a known skin irritant) and TPO (a material of concern). With its low water absorption of 0.5% and minimized water ingression it is ideal for the assembly or encapsulation of electronic wearable medical device components. Features: - Low water absorprtion: 0.5% - Biocompatible 10993-5 cytotoxicity standards - IBOA Free (designed without isobornyl acrylate) - UV/Broad Spectrum and LED curable at 365nm - Compliant with RoHS directives 2015/863/EU - Superior adhesion to a wide range of substrates - Solvent free