Band saws - Import export

Standard equipmentwith tilting alu sliding table 1000x800 mm Cutting height 424 mm Cutting length 700 mm Roller diameter 500 mm Saw band length 3720 mm a) for three-phase current 400 V, 50 Hz, motor power 1,3 KW b) or alternating 230 V, 50 Hz, motor power 1,3 KW only saw band, to be selected according to the type of stone material with jack rings and 2 rollers Sound emission Lpa according to DIN 45635, part 1651 on gas concrete and lightweight refractory bricks ...75 dB(A) on Poroton ...................................... 88 dB(A) Size LxWxH: 1000x1000x1800 mm Weight: 130 kg

Professional mobile band saw with robust construction, automatic band tensioning mechanism and precisely guided folding cutting table for cutting large-sized aerated concrete blocks. The saw can be easily set up and operated by one person and is characterized by extreme cutting precision. The maximum cutting height is 650 mm.

The secutex material may be sawn using a conventional band saw. The material will attempt to resist the cutting tool. Use as low a wedge angle as possible and, if necessary, adjust the cutting speed.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

The new HBE Performance Series offers high performance, with ease of use and efficiency. An increase in performance while reducing power consumption, combined with a small footprint, increased health and safety aspects and still provide easy handling were just some of the demands within its development. The HBE Performance series brings many features, which make your production even more profitable: — A solid and durable design made of vibration dampening grey cast iron — Outstanding cutting performance by Servo-Downfeed system with Auto-Feed-Control — Excellent blade life due to the sensitive BEHRINGER downfeed control system, inclined band wheels and effective chip disposal — Easy operation by intuitive NC control system Different models based on cutting range ( 90° flat / 90° round): — HBE560A Performance: 560 x 560 mm / 560 mm — HBE663A Performance: 710 x 660 mm / 660 mm — HBE860A Performance: 860 x 860 mm / 860 mm — HBE1060A Performance: 1.060 x 1.060 mm / 1.060 mm

The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.

When brought into contact with foods, some of the requirements optimally fulfilled by our knives include the minimization of cutting waste, no sticking of the foods, perfect cutting surfaces, insensitivity to acids, no risks to hygiene and cleaning.

We are not dictated to by standards. If at all, our sole and uncompromising standard is to produce the best possible knife for your task. We are your experts in this.

The universal band saw blade for all construction and insulation materials of small and large dimensions running on brick band saw machines. The new variable tooth pitch ensures notably low-vibration and quiet sawing processes and assures supreme quietness. The results are clean and smooth cuts of the best quality. Thanks to its long blade life and increased durability, our further developed, precision-ground tooth geometry is particularly convincing in hard building materials: • particularly low vibration and quiet • long blade life in especially precise and smooth cuts The specialist for: • Pore or lightweight concrete • Perforated brick • Porous bricks ("Poroton") • Insulation material

Engineered for : • Stainless steel • Heat resistant steels • Cold and hot working steels • Hardened steel up to 1900 N/mm2 • Nickel based alloys • Aluminium-silicon alloys • Copper-nickel alloys • Titanium and titanium alloys • Exotic, hard to cut alloys

Engineered for : • Induction hardened piston rods • Steels hardened up to 62 HRC • Hard chromium plated materials • Manganiferrous alloyed steels

Engineered for : • Aluminium alloys • Aluminium bronzes • Copper alloys • Sand cast aluminium and cast magnesium • Graphite

Engineered for : • Titanium alloys • Metals with high residual stress • Stainless steels • Special alloys • Abrasive non-ferrous metals and graphite

Engineered for : • Steels of the highest tensile strength • Long chipping materials • Stainless steel • Titanium based alloys • Nickel based alloys • Special bronzes

Engineered for : • hard and tough materials up to 1700 N/mm2 tensile strength • Stainless steel • heat resistant duplex steel • nickel based alloys • aluminium alloys • titanium bades alloys

Engineered for : • All-purpose use for construction steel, low-alloy steel, cast iron, aluminium, copper and bronze • Solid material in medium and large dimensions

Engineered for : • Stainless steel • All-purpose use for steels and non-ferrous metals • Tensile strengths of up to 1400 N/mm2 • Thick walled structurals

Engineered for : • Small workshop bandsaws • Common steel qualities and non ferrous metals • Cross sections over approx. 100 mm (4”)

Engineered for : • Large cross-section steel beams • Structurals with residual stress

Engineered for : • Pure aluminium and aluminium alloys • Solid material and structurals • Materials with residual stress and a tendency to become pinched

Engineered for : • Common steel qualities and non ferrous metals • Short-chipping materials • Small structurals with thin walls • Narrow cross sections up to approx. 100 mm (4”) • Contour cutting operations

For sawing processes using minimal lubrication. Powerful at high cutting speeds and feeds. Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections

Engineered for : • Steel beams, profiles and tubes • Mixed cross-sections

Engineered for : • Production band saw machines • All-purpose use for steels and non-ferrous metals • Tensile strengths of up to 1400 N/mm2 • Thick walled structurals

Engineered for : • Structurals with light or medium walls • Short chipping materials • Sheet metal on vertical band saw machines

The use of filtration materials and systems in the field of industrial applications and the use of filter in the producing industries claim filter as well as filter systems on the highest degree. New fiber types with different surface modifications in a new combination, united in the innovative polymer fiber filter FIBALON®tool, offering unique and outstanding filtration results. By optimizing our developed dynamic fiber fixation DyFix® and a particle-dependent fiber geometry, we can now also offer our worldwide unique polymer fiber filter for the industrial use. For example in metal band saws to protect the pump or for the treatment of cooling lubricants and also for cutting fluids (e.g. in CNC machines) is FIBALON®tool with its highly durable special fiber combination an inexpensive alternative with improved filtration efficiency compared to conventional systems such as centrifuges or belt filter systems.

Our narrow bandsaw blades are produced in coils and ready for use. Here, we use the most common tooth form in the wood industry NV. We sell the narrow bandsaw blades as: toothed, toothed and set, toothed, set and sharpened. We offer the following pitches: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 12 mm Below you can find the standard and semi-standard production program. (We can also produce other sizes. In this case, please contact us directly.) Standard (mm) Semistandard (mm) 10 x 0,6 10 x 0,4 | 10 x 0,5 10 x 0,6 12 x 0,4 | 12 x 0,5 15 x 0,6 15 x 0,4 | 15 x 0,5 | 15 x 0,7 20 x 0,7 20 x 0,4 | 20 x 0,5 | 20 x 0,6 25 x 0,7 25 x 0,4 | 25 x 0,5 | 25 x 0,6 | 25 x 0,8 30 x 0,7 30 x 0,6 | 30 x 0,8 35 x 0,8 – 40 x 0,8 –

Our bandsaw blades for mobile sawmills are available as coils and ready for use. We can supply the standard teeth W2-22 mm and W1-22mm. On request we can also provide the tooth W-19 mm and W-25 mm. We sell these bandsaws as: - toothed, - toothed, set and sharpened, - toothed, set, sharpened and hardened.

Production of bandsaw blades between 50 mm and 311 mm width. Available in the following styles: - toothed - welded - straightened and tensioned - swaged - set - stellite tipped Steel Qualities: - CR-100 swedish - CR-200 extra - CR-300 special - CR-400 PREMIUM - CR-400 Xtreme Coils: Available in both coils (10mm - 311mm) or finished saws (50mm - 311mm), bandsaw blades can be produced as single-sided or double-sided. Blades are also available with variable pitched teeth or with winter teeth.