Automatic valves - Import export

These Stainless bush automatic turning parts, application for valves compoment.

A flow valve is a critical component in various systems where the regulation of fluid flow is necessary. It’s designed to control the rate at which fluid passes through a system, ensuring that the flow matches the requirements of the application.Flow control valves are essential in industrial usage, hydraulic systems, and pneumatic systems. They play a crucial role in regulating the flow of fluids, ensuring optimal performance and efficient operation of machinery and equipment. Control valves can be actuated in various ways, including pneumatically, hydraulically, or with electric motors. Some valves, known as automatic control valves, do not require an external power source and operate solely on fluid pressure.When selecting a flow control valve, it’s important to consider factors such as flow rate and pressure requirements, material compatibility, and environmental conditions.

Peleus ball, simple pipetting aid. Evacuation takes place via an automatic valve. By pressing the valves, the liquid is drawn up, dispensed or purged. The removable automatic valve also enables effective cleaning of the inside.

Stainless steel float valves, stainless steel autotankers or optionally with plastic housing are a reliable level and inflow regulation in any container or as an automatic drinker. The float valve is covered by the housing and thus protected.

ROJO float valve is a float-operated, mechanical plastic valve for automatic refilling of water storage tanks. All ROJO float valves can be mounted above or below the water surface. The ROJO is a good choice when a low flow rate is sufficient and the stainless design is an advantage. It should be emphasised that the valves have an automatic flow stop when disassembled for maintenance. The ROJO is also available as a low pressure model (HF models) with 60% more flow rate. All Jobe float valves come complete with float. We also carry the Compact ROJO variant, which has all the features of the ROJO even in small tanks.

Positive displacement blowers and single-stage screw compressors start up directly or following a star delta circuit if no gentle start or no frequency converter control are available. The unit is subjected to heavy mechanical load and requires high start-up current. For this reason, counterpressure must be reduced during the start-up phase; this is achieved by blowing off the increasing volume flow. The fully automatic medium-controlled STRATE relief valve EVA has been specially designed for this procedure. As well as not requiring any maintenance, the STRATE relief valve EVA is an extremely economical device for reducing load during start-up since there is no longer any need to use complex externally controlled valves or electronic start-up aids. Product features Fully automatic control Specialized material G-AISi9Cu3 - specific to the requirements With solenoid valve for different motor speeds With overpressure valve For higher pressures and temperatures

— Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill — Double acting pneumatic drive — Readily mounted 5/2 way solenoid valve Diameters - Different versions 80–400 mm (3.1–15.7 in)

The GEMÜ 1435 ePos digital electro-pneumatic positioner detects the valve position via its external travel sensor. It has a solid housing with protected operating buttons and an easy to read LC display. The operating times can be set by integrated throttles. Connection and mounting to NAMUR is also possible. —Simple handling and commissioning —Simple electrical connection by detachable terminals —Automatically optimises the valve control during initialisation —No air consumption when idle

The GEMÜ 650TL diaphragm valve is a manual tapping valve with automatic closing function which is pneumatically operated. The "keep-closed" override of manual operation is via a stainless steel handwheel. The valve can only be operated (opened / closed), if a control medium is applied to the actuator. When the control medium supply is switched off, the valve closes and can no longer be operated manually. — Hermetic separation between medium and operator — Ergonomic handwheel — Additional pneumatic actuator for closing from a central control system — CIP/SIP capable — Optional flow direction and installation position

The multiple water quantity control system in modular design that is available in several versions fulfils not less than three requirements at the same time. It combines the advantages of the conventional water distributors, the impulse cooling systems and the continuously operating temperature control units while eliminating the disadvantages of each of these systems. The temperature control system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water quantity is individually set for each circuit at the central operating unit and - if necessary - is readjusted automatically via a water quantity regulation valve within adjustable limit values.

The SLB bandsawing machines from BEHRINGER: A trustworthy partner for workshop and plants. Suitable for cutting tubes, profiles and solid materials made of metal and comparable plastics. Competitive pricing, precision made components, and impressive power. See for yourself. - Mitre cuts are possible from + 30° to – 45° - Scale for setting the exact angle — Clamping of the saw frame with a quickly-tension lever — Downfeed control by a hydraulic flow control valve - Automatic height-setting of the saw frame above the material — Frequency controlled sawblade drive (optional) — Exact cutting

Using highly advanced gas filling Small and Medium Enterprises technology is no longer a privilege for large enterprises. Over the last 15 years Filltech developed, in its own research center in the heart of Germany, different standard filling solutions. Through this experience, Filltech has now developed UniFill Complete; a standard gas filling solution for small and medium enterprises, using highly advanced technology. UniFill Complete is a ready-to-use, standardized CO 2 und N 2O gas filling station with a wide filling range for cylinders between 4 and 50 kg. Highlights Easy, precise and safe operation Entry-level, low-cost solution Automatic filling process with bypass valve Pumping set included Integrated pump control Legal for trade

Tool case for hydraulic cutting head ipr50hS UNBEATABLE FEATURES • Water sealing, crushproof and dustproof • Easy-open, two-stage closure • Open cell core with solid wall construction - robust, light weight • O-Ring-Dichtung • Automatic pressure compensatin valve • Ergonomic handleg with rubber coating • Stainless steel fittings • Stainless steel padlock protectors SIZE: 424 x 332 x 111 mm EXTRAS: • Unconditionally Guaranteed • Internal foam protects the tool and is tailored in shape for the particular cutting or pressing head.

Automatic shutoff valves in both socket and plug for vacuum applications. Each can withstand a vacuum of as high as 1.3 x 101 Pa even when disconnected. Uses automatic shutoff valves with ultratight sealed construction in both socket and plug. Ideal for vacuum applications. Having automatic shutoff valves in both socket and plug facilitates easy fluid handling. Suitable for a wide range of vacuum applications as high as 1.3 x 101 Pa {1 x 103 mmHg} even when disconnected. Three types of seal material are available to suit any of the diversified production lines for air conditioners, refrigerators or similar. Can be connected with SP Cupla.

Automatic shutoff valves in both socket and plug for vacuum applications. Each can withstand a vacuum of as high as 1.3 x 101 Pa even when disconnected. Uses automatic shutoff valves with ultratight sealed construction in both socket and plug. Ideal for vacuum applications. Having automatic shutoff valves in both socket and plug facilitates easy fluid handling. Suitable for a wide range of vacuum applications as high as 1.3 x 101 Pa {1 x 103 mmHg} even when disconnected. Three types of seal material are available to suit any of the diversified production lines for air conditioners, refrigerators or similar. Can be connected with SP Cupla.

Both socket and plug have builtin automatic shutoff valves. Compact size with max. outer dia. 17.5mm. Compact yet operator friendly sleeve design. For small bore piping from temperature control piping to scientific equipment. Body materials in stainless steel or brass, excellent in corrosion resistance. Four types of end configuration enable suitability with a wide range of piping applications.

Simultaneously connects several ports securely in one operation! Greatly reduces changeover time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Comes with lock mechanism to prevent accidental disconnection. Large flow equivalent to that of SP Cupla Type A. Two kinds of plates are available for each size. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Selfaligned valve design provides safety sealing of individual socket or plug when disconnected.

Designed for quick replacement for die and mold ! Rust resistant models having many variations. Space saving design for molds with closely spaced coolant ports. Long sleeve socket facilitates connection/disconnection with plug embedded in mold. Various sizes and end configurations to suit a wide variety of mold applications. Can be connected with Super Cuplas, excluding K3 and K4 types. Pushtoconnect design. (Builtin automatic shutoff valve) Also available is Cupla without valve. (please specify the basic model).

High pressure Cupla for working pressures up to 68.6MPa and pressure resistance of 98MPa! Unique sleeve ringlock system copes with vibration and impact when connected. Cupla for extremely high working pressures up to 68.6MPa (700kgf/cm2) and pressure resistance of 98MPa (1,000kgf/cm2). Metaltouch valves use no rubber seal, and thus ensure excellent durability. Special sleeve ringlock system maintains tight connection even under vibration or impact when connected. Both socket and plug have metal touch automatic shutoff valves that prevent fluid spill out on disconnection.

Metaltouch valve system with superior durability! Sleeve stopper mechanism gives secure connection. Cupla for higher working pressure up to 44.1MPa {450kgf/cm2}. Mechanism to prevent accidental disconnection maintains tight connection even under vibration or impact when connected. Both socket and plug have metaltouch automatic shutoff valves that prevent fluid spill out on disconnection.

Can be connected even with residual pressure in plug side hydraulic line. This Cupla is best for frequent connection of pressurized hydraulic lines. Super HSP Cupla socket can be connected easily with small power to standard HSP Cupla plug even with residual pressure on the plug side of the hydraulic line. For impact resistance, especially repeated impulses, special quenched steel is used for the body. This ensures original performance over a long period. The design reduces pressure loss, and so particularly suitable for hydraulic applications where enough fluid flow is essential. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out on disconnection.

Super HSP Cupla socket can be connected easily with small power to standard HSP Cupla plug even with residual pressure on the plug side of the hydraulic line. For impact resistance, especially repeated impulses, special quenched steel is used for the body. This ensures original performance over a long period. The design reduces pressure loss, and so particularly suitable for hydraulic applications where enough fluid flow is essential. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out on disconnection.

Body material is excellent corrosion resistant stainless steel (SUS304). Suited for use in tough conditions such as ocean development. Although it is made of stainless steel, the unique “inner seal mechanism” enables the working pressure of 20.6MPa {210kgf/cm2}, the same as steel’s. Safety lock ensures tight and secured connection (preventing accidental disconnection) under vibration or impacts. Both socket and plug have builtin automatic shutoff valves that prevent fluid outflow on disconnection. Easy to handle.

Body material is excellent corrosion resistant stainless steel (SUS304). Suitable for use in tough / harsh environments such as offshore applications. Sleeve stopper mechanism can be engaged by rotating sleeve after connection. Despite having a stainless steel body, the working pressure, 21.0 MPa, of HSU CUPLA is comparable to that of special steel body CUPLA such as HSP CUPLA series. Both socket and plug have builtin automatic shutoff valves that prevent fluid outflow on disconnection. Easy to handle. Hydrogenated nitrile rubber (HNBR) is used as a seal material for wide variety of liquids.

Their “airless valve shutoff design” greatly reduces air admixture! Ideal for hydraulic lines with larger pressure fluctuations. Locking mechanism to prevent accidental disconnection maintains tight connection even under vibration or impact. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out when disconnected. Easy to handle.

Their “airless valve shutoff design” greatly reduces air admixture! Ideal for hydraulic lines with larger pressure fluctuations. Locking mechanism to prevent accidental disconnection maintains tight connection even under vibration or impact. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out when disconnected. Easy to handle.

Connects multiple lines simultaneously with a single operation for different fluids and sizes. Ideal for automated hydraulic or pneumatic cylinder operated systems that need to connect and disconnect several lines simultaneously. Automatic shutoff valves in both sockets and plugs ensure no outflow of fluid on disconnection. Body materials other than stainless steel are available, which can be ordered with or without valves (madetoorder products). Snap ring and screw threadin types to mount on the base plate are standardized. MAS type can accept axial eccentricity between socket and plug. The allowance of eccentricity is within the radius range of 0.3mm. Cupla connection with fluid under dynamic pressure cannot be made.

Flat contact face design reduces spill upon disconnection by less than half compared with that of conventional design. Flat contact face design makes it easy to clean dust and foreign matters adhered on the surface of coupling so as to prevent them from entering inside and thus causing faulty operation of connection or disconnection. Flat contact face design minimizes air admixture during connection to keep the possible malfunction of equipment caused by the air bubbles in the hydraulic line at minimum level. Pushtoconnect operation. Sleeve stopper mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection even when vibration or impact is applied to the Cupla. The special design reduces pressure loss considerably, and especially suited to hydraulic applications in which big flow is needed. Both socket and plug have builtin automatic shutoff valves that prevent fluid spill out on disconnection.