Automatic mechanisms - Import export

DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel DryLin® T - Technical data DryLin® T - Clearance adjustment DryLin® TWBM hand clamp DryLin® T - Design rules DryLin® T - Automatic clearance adjustment DryLin® linear guide systems in the cleanroom DryLin® T - Applications DryLin® T - System design DryLin® T - Installation videos System selection & service life calculation DryLin® T - Adjustable clearance The DryLin® T standard version is supplied preset and can be put into operation at once. The user can also manually adjust or fine-tune the clearance of the linear guide. The individual adjustment for your application, as well as the potential to respond to uneven screw surfaces through specific clearance allowance. DryLin® T - Adjustable clearance DryLin® T - Automatic DryLin® T carriages of the automatic version have a mechanism that automatically adjusts the bearing clearance after removal of the preload key. In case a bearing clearance of more than 0.13 mm has to be adjusted during operation, the bearing clearance automatically resets itself when the carriage is completely unloaded. DryLin® T - Automatic DryLin® TW-HKA manual clamp The manual clamp has been developed for simple tasks. The creep behavior of the clamped plastic causes a slackening in clamping force over time (up to 70%). Therefore safety-related parts should not be clamped. Please approach our applications consultant if you require other options for the clamping. DryLin® T - Manual clamping Drylin® T - Heavy Duty This series is used for the most extreme conditions such as dirt, adhesive residues, chips, mud, etc. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore non-detachable. This system is compatible with many standard commercial recirculating ball bearing systems and is available in the following sizes: TW-01-20, TW-01-25 and TW-01-30. DryLin® T Heavy Duty DryLin® T - Low-profile guide The clearance is not adjustable for the DryLin® T low profile guide rails. The gliding elements are mounted with positive fit in the chromated zinc carriage. This simple and effective design enables guides that are rugged and low-priced at the same time. DryLin® T - Low-profile guide DryLin® T - Compact linear guide This compact linear guide is suitable for rugged use (without clearance adjustment). This system has a slim design and the same dimensions as conventional recirculating ball bearing systems. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore undetachable. Suitable for DryLin® T guide rail of installation size 20. DryLin® T - Compact linear guide DryLin® TWBM - Manual clamping with high holding force This manual clamping is designed for a long-lasting high holding force of up to 500 N per clamping element. DryLin® TWBM hand clamp DryLin® T clamping elements for rail guide DryLin® T clamping elements for fast positioning by hand or with pneumatics. DryLin® T clamping element DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel Advantages: 100 % lubricant-free Adjustable bearing clearance Automatic clearance adjustment High static load capacity Service life up to 50,000 km without lubrication High dirt resistance Low vibration and low noise When not to use ? When you want to save installation space drylin® N drylin® W When you need a pure stainless steel solution drylin® W drylin® R When you want to construct as economical as possible drylin® N drylin® W

Effortless 180° rotation via foot pedal and automatic mechanical locking Optional sensory position readout Crank Expansion via directionally stable joints, easily operable even under weight Highestquality Reel Arbor with maintenancefree bearing and minimal deflection Sturdy and warp resistant body in welded construction for highest stability MHD Series PullOff Reel with manually adjustable brakes MHDM Series Payoff Reel with threephase motors for start / stop operation MHDR Series Payoff Reel with threephase motors and frequency inverter for continuous operation Optional Equipment MHDSeries Pneumatic hold down arms Electropneumatic brake systems Larger mandrel segments Motorized rotation Traveling feature w optional automatic centering Different mandrel heights Various expansion ranges Different back plate sizes Loop control systems...etc.

Effortless 180° rotation via foot pedal and automatic mechanical locking Optional sensory position readout Strong plasmaburned back plate provides smooth and straight operation Removable and adjustable hub disks Fast and precise expansion via bevel gear with exceptionally wide ranges, allows clamping of all internationally common coil sizes LHD Series PullOff Reel with manually adjustable brakes LHDM Series Payoff Reel with threephase motors for start / stop operation LHDR Series Payoff Reel with threephase motors and frequency inverter for continuous operation Pneumatic hold down arms Electropneumatic brake systems Larger mandrel segments Conical mandrels Traveling feature Different mandrel heights Various expansion ranges Different back plate sizes Loop control systems...etc.

Challenger 506D is fully automatic mechanical linear system It’s designed for filling liquid or pasty products in plastic bucket With five work stations: Adding buckets, filling, adding covers, pressing cover, Exiting

Mechanical design Automatic load balancing Optional with external clamps for telescoping materials Capacity max. 150 / 250 kg The RWM-L reel turner allows for the problem-free changing of mandrels for various sleeve diameters.

Effortless 180° rotation via foot pedal and automatic mechanical locking Optional sensory position readout Crank expansion via directionally stable joints, easily operable even under weight Highestquality arbor with maintenancefree bearing and minimal deflection Boxshaped stand with welded base plate for great stability LMHD Series PullOff Reel with manually adjustable brakes LMHDM Series Payoff Reel with threephase motors for start / stop operation LMHDR Series Payoff Reel with threephase motors and frequency inverter for continuous operation Pneumatic hold down arms Electropneumatic brake systems Larger mandrel segments Conical mandrels Traveling feature Different mandrel heights Various expansion ranges Different back plate sizes Loop control systems...etc.

Professional mobile band saw with robust construction, automatic band tensioning mechanism and precisely guided folding cutting table for cutting large-sized aerated concrete blocks. The saw can be easily set up and operated by one person and is characterized by extreme cutting precision. The maximum cutting height is 650 mm.

SPIROL's Series LP500 Latch Pins for Plastics are designed with a barb located under the head with a barb length equal to the width of the outermost section of the assembly. The remaining length of the LP500 Latch Pin is smooth without any other retention features. This allows the LP500 Latch Pin for Plastic to easily align and freely install through all of the holes with a plastic assembly until the barb makes contact with the final hole to securely lock the pin in place. Once fully installed, the handle will pivot freely around the non-barbed end of the stationary pin. The head prevents the LP500 Latch Pin from being over-installed, and enables the pin to be mechanically oriented for automatic installation. Manufactured from lightweight, lead free aluminium, SPIROL's LP500 Latch Pins for Plastics are available in three standard diameters: 3mm, 4mm and 5mm.

AccuBird® – Production • Developed and produced in Germany since 1992 by the inventor of the battery blind rivet setting tool Reliability • Electronic control • No mechanical switching components • Electronic temperature and overload protection • High reliability through low loss power transmission via a highly effi cient ball screw drive Freedom Cablefree tool for fl exible operation in installation jobs and industry production High performance • 10.000 N setting force • High pulling force for safe setting of blind rivets up to 5 mm diameter in all materials • High yield per battery charge • Large 20 mm stroke Versatility Blind rivets up to 5 mm Ø all materials. BULB-TITE® blind rivets 4 mm, 5,2 mm and 6,3 mm Ø alu and steel High speed • High speed of operation through automatic resetting of the jaw mechanism immediately after each setting process With Li-Ion energy • Choice of 2.0 Ah and 4.0 Ah Li-Ion batteries

Compact filters are characterised by the fact that they essentially unite fan, filter element and discharge or dust collection facility in one. The capacity range of the compact filters extends up to 20,000 m³/h. Different systems and modes of operation are available for the individual assemblies, resulting in a large number of possible variants. This allows us to offer a large range of solutions for dedusting tasks. Based on our many years of experience, we select the filter media from those available on the market that are best suited for the most diverse types of dust and tasks. Filter hoses, filter bags, filter tubes and filter cartridges are used as filter elements. Cleaning takes place using compressed air impulse, low-pressure purge-air or shaking. Fans from own development and production enable us to design a highly efficient and precise layout. Discharge usually takes place directly into collecting containers, such as dustbins with snap fasteners, or into containers, big bags, or via discharge mechanisms into automatic disposal systems. Screw conveyors, drag conveyors, rotary systems, cellular wheel sluices, double-gate sluices and slidegate valves are available as discharge mechanisms. Intelligent control systems, piping elements, silencers and pre-coating devices for auxiliary dusts are standard items in the range. Naturally we also use our know-how to create needs-based custom solutions.

Pressure ratings comparable to steel Cuplas. A builtin "automatic lock mechanism" to lock the sleeve when connected, thus prevents accidental disconnection. Just push plug into socket for simple connection. Can be used for air and water. Less likely to damage painted or easily dented surfaces than metal couplings. Air flows in either direction from plug or from socket side when coupled. Plug and socket with hose guard nut are also available (see the pages of NK Cupla Hose / NK Cupla Cpil Hose for details).

Application The Hunger RDS is designed to precision machine the seat ring bores in cylinder heads to produce smooth and closely fitting contact surfaces for oversize seat inserts. Features The RDS is equipped for counterboring as well as for facing the bottom of seat ring bores in a lathe-type action with a single point carbide cutter. The RDS is aligned in centerline with the valve guide by means of a pilot which is locked in the valve guide. An universal steady stabilizes the RDS against lateral displacement. Pilots and steady furnished with Hunger valve seat refacing tool also suit for the corresponding RDS tool. The built in feed gear mechanism for automatic longitudinal and cross feed of the single point cutter eliminates the need for multiple cutter sets and other accessories. An adjustable stop for the tool slide permits quick selection of the proper sized bore diameter.

The automatic one with a rolling mechanism -3 automatic release points mean the content can be emptied at 3 different positions over the container -automatic locking feature to prevent the container from slipping forward -safety feature to prevent unintentional emptying -ideally situated loading centre of gravity -body with all-round reinforced edging -sturdy frame with fork sleeves Accessories -galvanized lid, can be opened from both sides -welding, oil and watertight

-sturdy steel construction with reinforced edging -material strength: body wall 5 mm and fork sleeves 6 mm especially for heavy materials -through fork sleeves, closed construction make the unit very sturdy -ideally situated loading centre of gravity -rolling mechanism emptying: 1 automatic release function activated when the release foot is set down on the Container rim or 2 manual release by pulling on the cable provided -Finish: spray paintet or hot-dip galvanized -Volume (approx: in m³): 0,3 / 0,6 / 0,9/ 1,2 / 1,7 / 2,1 -Load capacity: 4000 kg Accessories -2 swivel + 2 fixed polyamide castors, one swivel castor with brake – remember the load capacity

OKTOMAT® SOS Classic is an emptying station for the automatic emptying of Octabin and BigBags. A pallet jack is enough to move the container under the emptying station. The bulk bags can be completely and trouble-free emptied from above. The OKTOMAT® uses a vibrating suction head and the automatic bag tightening mechanism pulls the foil inlet or BigBag upwards. The material flows towards the middle and is continuously sucked. The SOS series with its full equipment is ideally suited for the majority of applications and difficult tasks. The integrated oscillating systems for foil / BigBag tightener and suction head enable the emptying of free-flowing to heavily bridge-forming materials. Due to its portal form it is particularly space-saving in depth and the increased tension force allows even high-density materials to be emptied without a problem. OKTOMAT® emptying stations are easy to use, low maintenance, robust and durable.

OKTOMAT® SOS is an emptying station for the automatic emptying of Octabin and BigBags. A pallet jack is enough to move the container under the emptying station. The bulk bags can be completely and trouble-free emptied from above. The OKTOMAT® uses a vibrating suction head and the automatic bag tightening mechanism pulls the foil inlet or BigBag upwards. The material flows towards the middle and is continuously sucked. The SOS series with its full equipment is ideally suited for the majority of applications and difficult tasks. The integrated oscillating systems for foil / BigBag tightener and suction head enable the emptying of free-flowing to heavily bridge-forming materials. Due to its pedestal form, the OKTOMAT® SOS is particularly space-saving in width, the height is individually adjustable. OKTOMAT® emptying stations are easy to use, low maintenance, robust and durable.

OKTOMAT® SOS is an emptying station for the automatic emptying of Octabin and BigBags. A pallet jack is enough to move the container under the emptying station. The bulk bags can be completely and trouble-free emptied from above. The OKTOMAT® uses a vibrating suction head and the automatic bag tightening mechanism pulls the foil inlet or BigBag upwards. The material flows towards the middle and is continuously sucked. The SOS series with its full equipment is ideally suited for the majority of applications and difficult tasks. The integrated oscillating systems for foil / BigBag tightener and suction head enable the emptying of free-flowing to heavily bridge-forming materials. Due to its pedestal form, the OKTOMAT® SOS is particularly space-saving in width, the height is individually adjustable. OKTOMAT® emptying stations are easy to use, low maintenance, robust and durable.

Elliptical columns made of corrugated board are ideal for promotional merchandising campaigns in stores, at exhibitions, events, indoors and outdoors, as information, presentation space or retail display. The DROP '’N POP-display comprises few interlocking corrugated board components with a clever mechanism: They automatically assume shape when they are opened up.

TYP C 069/G Cutting, stamping and bending device for radial components Description To eliminate belt- tolerances the Streckfuss machine Type C 069 G was developed with an integrated touch- facility. With this all usual in the trade component- belts which meet the IEC- Norm can effortless be processed. The component is formed and cut with a maximum tolerance of ± 0,1 mm. The supply of components is exclusively done by reel. For this the machine has a combined location for reel and amo- pack. To save set- up time all necessary toolkits for specific formings are mounted in one unit. These toolkits can be inserted or exchanged within a very short time. When inserting a toolkit the driving- mechanism automatically will be locked. The machine is prepared to keep 2 processing- units. One unit performs upward formings and the other performs downward formings. After the components have been formed and cut they are ejected into a bin for collection. Components