Assembly pastes - Import export

Assembly lubrication of sliding points Screw lubrication at normal temperatures and low speeds Lubrication when joining parts Advantages and benefits Prevents frictional corrosion on joint connections of steel parts of all kinds subject to vibration loading under damp-room and aggressive operating conditions Low consumption thanks to thin-film lubrication Excellent water resistance Excellent lubricating and separating effect Good corrosion protection behaviour Metal-free For optimum adhesion, clean contamination and other lubricants from sliding surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaner. Apply the paste evenly and thinly with a brush, spatula, etc. Remove excesses. Do not use paste instead of grease and mix only with suitable lubricants.

Mounting paste for press-fitting wheels, shafts, tires or bearings to prevent galling Non-stick primer coat for moving threads, supports, guides and slideways to prevent stick-slip effect Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties In non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Against seizing, wear and stick-slip Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Resistant to water, oil, grease, chemicals and hydraulic media Improved performance due to organic molybdenum complex compounds For best adhesion, clean the surfaces from dirt and other lubricants. Best way is to clean mechanically first

In 2015 the product name was changed. The old product name was Castrol Optimol Paste PL. Black assembly paste with MoS2 Description Castrol Molub-Alloy Paste PL (previous product name Castrol Optimol Paste PL) is particularly suitable for pressure-loaded sliding points as well as base and thin film lubrication at high pressures and temperatures. For larger areas and in hard-to-reach places such as bores, threads and sprockets, the use of Castrol Molub-Alloy Paste PL Spray is recommended . Application Castrol Molub-Alloy Paste PL can be used for screw connections, snug and press fits at high temperatures up to +600 °C, on plain bearings, bushings and gears, on drive trains in the automotive industry, for basic lubrication of bed tracks, guides and joints as well as for clean Separation of tool and workpiece during hot forming of metals.

Assembly paste for press-fitting wheels, shafts, tires or bearings Non-stick primer coat for moving threads, guides and slideways to prevent stick-slip effect, seizing and wear Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties Suitable for non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Immediate effective protection against corrosion, wear and stick-slipping under high stress conditions No pressing onto the sliding surface required Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Improved performance due to organic molybdenum complex compounds Also available as spray version OKS 221 For optimum adhesion, clean contamination

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical stress. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

In 2015 the product name was changed. The old product name was Castrol Special Paste AU LN 598. Molub-Alloy Paste AU LN 598 White assembly paste Description Castrol Molub-Alloy Paste AU LN 598 (previous product name Castrol Special Paste AU LN 598) is ideal for all clean assembly work as well as as a base or thin film lubrication suitable. It specifically prevents fretting corrosion . The fitting parts can be easily removed even after years. Application Castrol Molub-Alloy Paste AU LN 598 can be used as a universally applicable assembly paste, for fitting parts in environments at risk of vibration, in mechanical systems with frictional vibrations, on hydraulic cylinders and open lubrication points as well as on sliding points in vehicle and transmission construction.

High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

Assembly paste for press-fitting wheels, shafts, tires or bearings Non-stick primer coat for moving threads, guides and slideways to prevent stick-slip effect, seizing and wear Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties Suitable for non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Immediate effective protection against corrosion, wear and stick-slipping under high stress conditions No pressing onto the sliding surface required Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Improved performance due to organic molybdenum complex compounds For optimum adhesion, clean contamination and other lubricants

Lubrication of all kind of high stressed sliding areas, especially at low sliding speeds or oscillating movements, e.g. at threads, joints and bayonet nut connectors made of steel or non ferrous metals Assembling paste with corrosion protection for screws, bolts, spikes, bushings, flanges, spindles and fittings in the whole food stuff industry Separation of high temperature stressed screw joints, even after a long operation time Advantages and benefits Adheres good on metal surfaces, has a good water resistance and corrosion protection Good water resistance Prevents from tribo-corrosion Contains no metal pigments and is free of sulphurous materials Neutral to alloyed steels Formulation according to the FDA guideline 21CFR 178.3570 Registered by the NSF H1 MOSH/MOAH-free For optimal adhesion clean thread and sliding areas from dirt and other lubricants, first mechanically (e.g. with wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner. Apply paste evenly in a sufficient amount