Assembly pastes - Import export

The Lindemann MP 790 Assembly Paste provides a remarkable reduction in friction and, in particular, ensures that the assembled parts can always be easily disassembled. Furthermore, it has exceptional lubricating and sealing properties

Mounting paste for press-fitting wheels, shafts, tires or bearings to prevent galling Non-stick primer coat for moving threads, supports, guides and slideways to prevent stick-slip effect Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties In non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Against seizing, wear and stick-slip Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Resistant to water, oil, grease, chemicals and hydraulic media Improved performance due to organic molybdenum complex compounds For best adhesion, clean the surfaces from dirt and other lubricants. Best way is to clean mechanically first

Assembly lubrication of sliding points Screw lubrication at normal temperatures and low speeds Lubrication when joining parts Advantages and benefits Prevents frictional corrosion on joint connections of steel parts of all kinds subject to vibration loading under damp-room and aggressive operating conditions Low consumption thanks to thin-film lubrication Excellent water resistance Excellent lubricating and separating effect Good corrosion protection behaviour Metal-free For optimum adhesion, clean contamination and other lubricants from sliding surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaner. Apply the paste evenly and thinly with a brush, spatula, etc. Remove excesses. Do not use paste instead of grease and mix only with suitable lubricants.

Assembly paste for press-fitting wheels, shafts, tires or bearings Non-stick primer coat for moving threads, guides and slideways to prevent stick-slip effect, seizing and wear Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties Suitable for non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Immediate effective protection against corrosion, wear and stick-slipping under high stress conditions No pressing onto the sliding surface required Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Improved performance due to organic molybdenum complex compounds Also available as spray version OKS 221 For optimum adhesion, clean contamination

In 2015 the product name was changed. The old product name was Castrol Optimol Paste PL. Black assembly paste with MoS2 Description Castrol Molub-Alloy Paste PL (previous product name Castrol Optimol Paste PL) is particularly suitable for pressure-loaded sliding points as well as base and thin film lubrication at high pressures and temperatures. For larger areas and in hard-to-reach places such as bores, threads and sprockets, the use of Castrol Molub-Alloy Paste PL Spray is recommended . Application Castrol Molub-Alloy Paste PL can be used for screw connections, snug and press fits at high temperatures up to +600 °C, on plain bearings, bushings and gears, on drive trains in the automotive industry, for basic lubrication of bed tracks, guides and joints as well as for clean Separation of tool and workpiece during hot forming of metals.

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical stress. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

In 2015 the product name was changed. The old product name was Castrol Special Paste AU LN 598. Molub-Alloy Paste AU LN 598 White assembly paste Description Castrol Molub-Alloy Paste AU LN 598 (previous product name Castrol Special Paste AU LN 598) is ideal for all clean assembly work as well as as a base or thin film lubrication suitable. It specifically prevents fretting corrosion . The fitting parts can be easily removed even after years. Application Castrol Molub-Alloy Paste AU LN 598 can be used as a universally applicable assembly paste, for fitting parts in environments at risk of vibration, in mechanical systems with frictional vibrations, on hydraulic cylinders and open lubrication points as well as on sliding points in vehicle and transmission construction.

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical loads. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

In 2015 the product name was changed. The old product name was Castrol Optimol Paste TA. High temperature assembly paste Description Castrol Molub-Alloy Paste TA (previous product name Castrol Optimol Paste TA) is a paste for screw connections up to +1100 °C. It is used as an assembly paste and prevents sticking, welding and scaling. Molub-Alloy Paste TA ensures good separation and sealing in high-temperature and wet areas as well as in aggressive media. Application Molub-Alloy Paste TA is used as an assembly aid for components at risk of corrosion, temperature and environmental stress, such as screws, bushings, valves, flange and pipe screw connections, form-fitting components, seals, stuffing boxes and packings as well as for metal pairings of light metal against steel. Molub-Alloy Paste TA is used as a base and thin film lubrication for sliding surfaces subject to high thermal loads.

Assembly paste for press-fitting wheels, shafts, tires or bearings Non-stick primer coat for moving threads, guides and slideways to prevent stick-slip effect, seizing and wear Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties Suitable for non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Immediate effective protection against corrosion, wear and stick-slipping under high stress conditions No pressing onto the sliding surface required Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Improved performance due to organic molybdenum complex compounds For optimum adhesion, clean contamination and other lubricants

Lubrication of all kind of high stressed sliding areas, especially at low sliding speeds or oscillating movements, e.g. at threads, joints and bayonet nut connectors made of steel or non ferrous metals Assembling paste with corrosion protection for screws, bolts, spikes, bushings, flanges, spindles and fittings in the whole food stuff industry Separation of high temperature stressed screw joints, even after a long operation time Advantages and benefits Adheres good on metal surfaces, has a good water resistance and corrosion protection Good water resistance Prevents from tribo-corrosion Contains no metal pigments and is free of sulphurous materials Neutral to alloyed steels Formulation according to the FDA guideline 21CFR 178.3570 Registered by the NSF H1 MOSH/MOAH-free For optimal adhesion clean thread and sliding areas from dirt and other lubricants, first mechanically (e.g. with wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner. Apply paste evenly in a sufficient amount

Lubricating and assembly paste formulated with mineral base oils, calcium soap and polytetrafluorethylene (PTFE) protecting against wear and fretting corrosion. Generally suitable for the lubrication of roller and journal bearings.

LUBCON offers a wide variety of aerosols for many applications: Chain oil, silicone oil, penetrating oil, cleaner and degreaser, grease and assembly pastes.

Anti-seize assembly and slideway paste for application at high temperatures up to 1200 Deg. C. These assembly pastes offer optimum lubricating and anti-seizing properties even at high surface pressure.

High-temperature resistant lubricating and assembly pastes based on synthetic oils with molybdenum disulphide additives (MoS2). They feature a low coefficient of friction and are thus suitable for the lubrication of metals with a low tolerance and surface roughness. The pastes are extremely oxidation resistant and prevent wear and fretting corrosion.

Lubricating and assembly paste, free of heavy metals with white solids protecting against tribo-corrosion. Due to the latest additive technologies it protects very well against wear and corrosion in guides, joints, bolts, bushings, cams and hinges, that are subject to high loads.

Pastes are essentially lubricants (oils, thickeners and additives) with a higher content of thickeners and solid lubricants. Depending on the selection of the additives, they can be used in multiple applications. Lubricating and assembly pastes with a high content of solid lubricants provide excellent lubrication and separating effect, even under extreme temperatures and loads. Due to the excellent media resistance, they establish a water and steam-resistant lubricant film and protect reliably against tribo-corrosion. Pastes are often used for the start-up and running-in lubrication of chucks, joints, journal bearings, pins, bolts and bushings. Furthermore they are used for the assembly and disassembly of bolted connections which are for example difficult to disassemble after high-temperature applications.