Aire - Import export

The charging electrodes CE 103L, with GFP profiles, are used for the surface charging of different materials. A greater operating distance can be achieved through the air assistance. A supply voltage of ±30kV should not be exceeded. Attachment of the charging electrode is carried out via a T-Slot. So, they can be mounted anywhere.

Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Health hazards Oil mist and emulsion mist

Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Health hazards Oil mist and emulsion mist

Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Health hazards Oil mist and emulsion mist

Oil mist separator – extraction systems for vapours Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%.

Large body suitable for industrial use and longer life -Chrome body coating to increase wear resistance -Perfect for work pressure 10 kgf/cm²

— Filtering of displaced air during loss-in-weight feeder refill — Filter cartridge with filter material made of polyester fleece (conforms to FDA and GMP directives) — Trapped dust is automatically cleaned by pulses of compressed air (dust falls back into the feeder eliminating ingredient waste) — Models available for hoppers up to 1000 dm³ (35.3 ft³)

The AIRPURION 90 active consists of a matt anodized and completely closed aluminium frame. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamp inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if there are people staying in the room not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The AIRPURION 48 active consists of a matt anodized and completely closed aluminium frame. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamp inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if there are people staying in the room not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The AIRPURION 300 active consists of a complete housing made from stainless steel 1.4301. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamps inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if there are people staying in the room not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The cylinders described here are pneumatic drive units mainly for linear movement. The piston rods or the magnetic traction transfer the movement of the piston to the components to be moved. We offer round, short-stroke, compact, profiled barrel cylinders and piston rod-free drives. In addition you will find here a whole range of sensors, fastening parts and accessories. Our piston rod cylinders are fabricated according to various ISO standards and are available in single-acting or double-acting design. They are suitable for filtered, unoiled or oiled compressed air.

This accessory is used for air humidifiers.

This product is used for very precise products with very high surface requirements.

CNC machining parts.

zero grade air / analytical air

zero grade air / analytical air

zero grade air / analytical air

zero grade air / analytical air

Strengthen and enhance membrane performance Customized and developed for specific end-use applications, POREX ® membrane support media are used as substrates for fragile membranes to provide structural strength and enhanced performance. Available in polyethylene (PE) and various customized geometries, our membrane support media: Support fragile membrane s with a strong and durable media. Enhance performance of specific end-use applications with custom designs Materials Offered Advanced porous materials (PE) Formats Available 3D molded shapes One piece solid and welded options including tubes and sheets Customization options for specific applications Request Sample ask an engineer

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve

high accuracy for feed repeat of +/ 0,05 mm high clamping force to serve even large material crosssections serving a wide variety of materials, such as coil, band, bar or profile stocks or even wires, cardboards, papers and fabrics operation in push or pull mode or combined in pushpull mode special air cylinder design for reduced air consumption feed length adjustment via finethreaded spindle

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air

Greater comfort, sealing and support for face mask applications Expect greater comfort and support for consumer and industrial face mask applications with POREX® latex-free foam. Tailored for your application, our latex-free foam: Conforms to nasal and facial contours – Shapes to end-user nasal and facial contour for superior seal and fit, which enhances safety during use. Controls perspiration for added comfort Meets custom end-use requirements – Customized durometer, color and width to meet your face mask specifications. Features Conforms to nasal-facial contour for maximum comfort and fit Latex-free and hypoallergenic Materials Offered High purity polyurethane foam Formats Available Customized size, durometer, color and width Request Sample ask an engineer

Effectively reduce pneumatic equipment noise Engineered to provide an optimal balance between noise reduction and acceptable backpressure in the pneumatic system, our porous plastic silencers offer numerous advantages over metal acoustical silencers. Our porous plastic silencers are designed with a significantly lower weight along with greatly improved corrosion resistance and the ability to filter particles and aerosols. This leads to greater durability, assembly speed and cost-efficiency for our partners. Designed with a solid integrated threaded adapter to ensure easy mounting on pneumatic equipment, our silencers: Fit most standard valves – Offered in an extensive selection of sizes designed to fit most standard valves, including NPT, BSP, M5 and “push-in” styles. Enhance equipment longevity – Effectively filters particulates and aerosols. Reduce pneumatic equipment noise – Engineered with a porous plastic structure, offering greater noise reduction compared to metal and...

Increase performance of your pneumatic systems Powering pneumatic machines requires clean and conditioned air or gas. Our pneumatic filters are designed to work together with regulators and lubricators (FRL units), to offer outstanding performance and a lower-cost alternative to traditional sintered-metal filters. Specifically designed to provide an excellent combination of particulate filtration, air flow and back pressure performance, while complying with strength and aesthetic requirements, these single-component molded filters: Meet your filtration requirements – Optimized design meets filtration, airflow and pressure drop requirements. Reduce costs – Sintered polymer filters are more cost-effective than sintered metal. Improve machine longevity – Design is optimized for reliability, efficiency and longevity of pneumatic machinery. Features Work together with regulators and lubricators (FRL units) to deliver clean and conditioned compressed air or gas Strong and rigid for...

The continuous product flow from the filling chamber is ensured by the fluidization air quantities being adjustable to your product. For compact bag shapes the special BEHN + BATES filling de-aeration nozzle removes the air from the bag already during filling.

The CSN® AirCoil is a special design based on the physical construction of a Rogowski Coil. Due to the ironfree design the coil does not have any saturation which allows to use only one CSN® AirCoil Module for both metering and protection arrays. Additionally the CSN® Aircoil shows linear transmission behaviour over a wide frequency range. A current range of hundred amperes up to several hundreds kiloamperes is easy to realize. CSN® AirCoil Modules are combinable and hence the output voltage level is adjustable to customer request. The very compact design with an excellent longterm stability are additional benefits for special applications. Further information about our CSN® AirCoil

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.