Adjustable system - Import export

Trifix® is the new adjusting system for Gildemeister multi tasking machines. The double sided adjusting system is guided by a very precise key way at the surface of the turret. 

 The plates are preloaded, and the resiliency in the adjusting system eliminates static redundancy. This allow the exact position of the tool to be secured and significantly reduces the setup time of the machine. Because this is a highly sophisticated precision instrument it is not possible to use double serrated tool shafts. The tool is supplied fully adjusted and can be used right away. EWS is the DMG system partner for this tool generation. Trifix® advantages: Repeat accuracy below 6 µm at radius of 200 mm High positioning accuracy from one station to another (0.01 mm) Driven tools and static tool holders are completely aligned Static tool holders can be used together with additional drill pattern for mounting Heavy duty spindle noses can be used together with additional d

Compared to conventional systems, the dynamic pusher system "Adjustable Tray" offers you the possibility of placing a wide variety of beverage bottles directly next to each other on a shelf. The width of the shelf dividers can be adjusted to 6 different widths. The "Adjustable Tray" bottle pusher system is thus used for small and large bottles, which are optimally conveyed to the first row of your shelf. Your customers look at an orderly shelf and take in your entire assortment without being disturbed. At the same time you save the time-consuming maintenance of the shelf order. The beverage bottles are removed in individual units and the quantity is determined individually by the customer. We offer the bottle pusher system for three different shelf depths. 406 mm, 457 mm or 508 mm. The matching fastening rail (22.0424.1) can be used for all shelf depths and enables simple and quick assembly of the "Adjustable Tray" bottle pusher system.

The adjustable sliding gate orifice type 8090 is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed state during operation. Among other things, the orifice facilitates the hydraulic adjustment of cooling systems, e.g. when commissioning large engines in CHPs and on ships.

The adjustable sliding gate orifice type 8090 in reinforced version is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed state during operation. Among other things, the orifice facilitates the hydraulic adjustment of cooling systems, e.g. when commissioning large engines in CHPs and on ships.

Easy Touch Control ETC5000 is the plug + play basis for a complete format adjustment system. The intuitively operated control systems of ETC5000 is designed to control up to 31 bus-compatible position indicators or actuators. Whether monitored format adjustment via digital position indicators or fully automated format adjustment via actuators –The system provides you with the flexibility you need. Control system for position indicators and actuators. Intuitive touchscreen control concept for format adjustment. Up to 31 devices can be actuated. Single or set positioning. RS485 and USB interfaces.

The CompactLoader is an especially compact infeeder which transports sliced portions fully automatically and feeds them into a packaging machine – all at a very modest footprint. Human touch of groceries is practically reduced to zero. Cleaning times of the CompactLoader are short and efficient. Advantages Compact, small footprint Modular adjustable system Weber hygienic design Arranges portions in die fomats, buffers them and places them in the packaging machine One design in different configurations – from base to top Space saving due to integrated rocker Optimal access to packaging machine by raising the buffer conveyors Infeeding belt foldable and swivable side-wise Easy cleaning, maintenance and service Options: Upper reject conveyor Buffer conveyor (2, 3, 4) Grouping conveyor (3, 4) Line divider – 2 axis 1 > n or 2 > 2 n Line divider – 3 axis 1 > n, 2 > 2 n, 2 > 3

Lifting column Multilift II ESD – discharging voltages via the lifting column In the electronics and semiconductor manufacturing industry, electrostatic discharges can impair the function of components being assembled, or even destroy them. Special ESD assembly workstations are equipped with an antistatic finishing that prevents this from occurring. Until now, lifting columns for the height adjustment of workstations have prevented the safe dissipation of electrostatic discharges by interrupting the electric connection between the table and the foot frame. However, with the Multilift II ESD, RK Rose+Krieger has developed a patented electric height adjustment system that is able to dissipate voltages. This has been realised thanks to the design of the outer and inner profiles which are continuously in contact with one another.

Installation: set up as before. Or even better. After we’ve unloaded, moved in and positioned your machinery and systems, that’s when it gets really interesting for our experts. The precise alignment of each individual part and meticulous millwrighting are key here. Our specialists then carry out the electrical and pneumatic reassembly. Once all the internal connections are in place, we then connect your machines to all the necessary utilities. Our teams use state-of-the-art measurement techniques in each and every step. They level the machine axes and adjust the system following the information recorded prior to disassembly and the manufacturer’s technical specifications. Then the way is clear for rapid commissioning and a successful start to production. SCHOLPP staff don’t guesstimate – precision is what you need when it comes to installation.

With the 1-way height-adjustable roof hook, the K2 system can be flexibly mounted on roofs with Coppo tiles. The rails of the SolidRail system can be mounted in the elongated hole of the Vario 1 hook with an M10 hammer head screw. With the help of the L adapter, the roof hook for Coppo tiles is also compatible with the SingleRail rails.

With the 2-fold height-adjustable roof hook, the K2 system can be flexibly mounted on roofs with pantiles. The rails of the SolidRail system can be mounted in the elongated hole of the Vario 1 hook with an M10 hammer head screw. With the help of the L adapter, the Vario 2 roof hook is also compatible with the SingleRail rails

Adjustment of workstation systems through to complex mechanical engineering systems Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology. Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns. The right Lifting column, quickly and easily Use our online product finder and compare lifting columns with each other, receive catalogue and CAD data or request the desired products directly.

Terrace Heater Ecoline available in stainess steel or steel powdercoated Up to 76 hours operating time burning systems are free adjustable radiates heat within a radius of ø 4,5 m wheels included european gas pressure regulator included

SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!

Customized Solution The mobile testing device may be mounted directly on the wheel nuts on any wheel on the car. The height and tilt adjustment allows optimal orientation at the wheel. Additionally, it is still supported by three proximity sensors. The evaluation and control of the testing device accepts a laptop. For easy transport, the device can be disassembled in a few steps. Curve recording and analysis via notebook. The complete unit is height adjustable via a scissors system. This can also be adapted to different shaft height.

The pressure transmitter DPS 300 was developed for the differential pressure measuring for dry, non aggressive gases and compressed air and can be used for several HVAC applications. The DPS 300 is a multi range transmitter with up to three adjustable ranges. The device is equipped with a two-line LC display optionally and can simply parameterised. Values, status of the contact and the unit are shown on the display. Features: — differential pressure 0 ... 1.6 mbar up to 0 ... 1.000 mbar — accuracy: 0.5 % FSO BFSL — current and voltage output signals in 2- and 3-wire systems — adjustable ranges — adjustable damping Optional Features: — LC-display, two-line — automatic zero adjustment — contacts (only in combination with display) — square root extraction (only in combination with display)

Ø 13mm; length 64,5mm

Ø 25mm; length 66mm

Impressive development of the SHS series is assured with the design of the SHS3 switch. Having to replace the safety hinge switch whenever the equipment is bumped or damaged due to mechanical stress is unnecessary thanks to the solution offered by the SHS series. The hinge setting can be corrected even after the switching point is set. This process can be done with the assistance of the integrated adjustment system. The hinge switch is also reusable even when the system itself needs to be converted. Thanks to change kits, the operator can redefine the switching point without compromising the IP 67 protection rating.

The C 22 ensures the precise, cost effective and efficient production of parts. The numerous automation solutions enhance its range of application; individual configuration is easy thanks to the modular design. The Hermle engineers have essentially designed and created this machine with space in mind. With the most efficient footprint possible, the C 22 offers maximum efficiency. And it goes without saying that large components can be machined, too. Nonetheless, the C 22 is ultra compact and ensures the necessary clearance for 5-side/5-axis machining. Short process cycles, quick workflows and the highest possible machine dynamics: The C 22 is designed to machine complex geometries with high accuracy and small tolerances. The circular tool magazine is integrated into the base body of the machining centre and can house up to 65 cutters; additionally, it is possible – as with almost all HERMLE machining centres – to adjust the operating system to the user.

DM Panel-demagnetizing devices are quality, modern equipment with 100% duty cycle and a unique system that adjusts the intensity of the field size and the volume of the work, creating a low standby power consumption and high demagnetizing-quality be achieved. DM Demagnetizing devices can also be used as under- or tape devices. The workpieces are guided over the pole plates manually or by conveyor belt. Mass parts can be collected in a non-magnetic container and passed over the pole faces.

It supports the efficiency and cost effectiveness of climbing systems in adjusting flexibly to the structure geometry and in permitting larger formwork units. With the climbing bracket 240 PASCHAL wall formwork systems can be also used as climbing formwork. This is especially an advantage for building a structure in several height phases. A complete climbing unit consists of climbing platform (bracket + planking), formwork, concrete and suspended scaffold and can be moved with only one crane cycle. Hereby efficient and economic work sequences can be achieved.

In the food industry the atomisers and dosing systems of Mantis can be used everywhere where liquids have to applied uniformly and sparingly. This could for example be the application of release agents onto baking trays and dishes or the application of flavouring substances. Don’t hesitate to contact us! We offer an optimally adjusted spraying system also for your application area!

Technical Data Dimensions (L/W/H) 152/67/132 cm Total weight 105 kg Maximum user weight 150 kg Mains-independant operation Performance range graduation in 5 watt steps 15 - 500 Watt pedaling speed independent 15 - 1.000 Watt pedaling speed dependent Speed range 20 - 120 rpm Equipment Integrated chip card system Deep passage for simple training positioning Continuous horizontal seat adjustment 3 Training programmes (quickstart, watt (timetraining), pulse) Multicoloured background lighting with feedback function for correct training performance Pulse receiver, polar-coded Options 250 kg user weight Additional training and test programmes Length-adjustable pedals Ear pulse system Adjustable backrest (gas-assisted)

TAMETO with suspended mounting is the first choice when a continuously height-adjustable workplace-system luminaire is required. TAMETO is mounted on the top crossbeam of the system workplace by means of a counterweight pendant. Depending on individual lighting needs and the visual task, it can be set to the optimum height. Its handling is especially easy, and the variable-length spiral cable ensures a tidy appearance. • Available with maintenance-free LED technology or energy-efficient fluorescent lamp technology • Extremely homogeneous, glare-free and flicker-free light • Light exit with conical prismatic structure for perfect glare-free lighting • Continuously dimmable (variants) • Two lengths for different table widths and lighting needs • Robust aluminium housing • Closed construction protects the inside of the luminaire and keeps the work surface clean • Also available in ESD design

DESCRIPTION compact design. made up to our German technology, to meet all the international and the European standards. One side labeling machine with coding, dating system Our machine can handle a large type of label, Bottles, and caps Types, size and shapes. SPECIFICATION Pneumatic paddle Volumetric filling system Type of metal used S.S 316 Labeling head. Pneumatic capping gun Drawer feeding caps Label coding system Mechanical weight adjustment system Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

With a measuring range of 17 to 500 m³/h, the Minneapolis FlowBlaster has been especially designed for testing ventilation systems during residential and commercial construction. In combination with the measuring fan BlowerDoor MiniFan, it allows the precise measurement of the air flow at supply and exhaust air valves. Measuring the supply and exhaust air flow at the respective valves provides information as to whether the requirements have been implemented as designed. If the air flows measured at the valves deviate from the requirements, the ventilation system can be adjusted.

Open Grid Europe owns and operates mobile gas pressure regulating and metering (GPRM) stations which you can use under a comprehensive, bespoke service contract, for example when you want to maintain the gas flow during work on a pipeline or require a temporary feed-in point to your gas grid. Technical details: Pressures of up to 84 bar Volumetric flow rates of 800 to 100,000 m3/h Can be connected to telemetry systems Adjustable pressures, flows and blending ratios Gas quality conversion from H-gas to L-gas, if required Thanks to the modular design of the system we can build a mobile station tailored to your specific needs complete with all necessary modules such as filters, pre-heaters, instrumentation and control equipment.

The trimming saw is installed downstream of the last surface-layer mat former, cutting the strand mat precisely to the required width. Two motor-adjustable saws, one each located on either side of the belt, cut the strand mat to the dened width. The trimming waste is discharged through a hopper and recycled to the mat former bins. Features Motor-adjusted saw blades incl. distance measurement Movable mat edge retainers to ensure high-quality cuts Lateral pressure rollers ex saw compact and smoothen the mat edge Movable extraction system adjustable to mat thickness Advantages Recipe-related adjustment of all adjustable axes Eective strand extraction

This cleaning machine "Rhönrad" is the ideal choice for the cleaning of parts with cropped areas, which needs to be moved during the cleaning process (rotate or swivel around the horizontal axis). Through the use of a special height adjustable lock-system also smaller baskets can be used without problems. Multi tank systems for special subsequent processes can complemented as well as drying and bath treatment systems. The PERKUTE-System: economically - environmental - effektive Basic unit § Stainless steel version § Compact and sturdy construction § Modern design § Powerful washing pump § High permissible basket load § Low water pressure switch as dry-run protection for pump and heating elements § Tank cover in the return flow, filter baskets incl. § Programmable Siemens S7-1200 touch panel control § Complete machine casing in modern design § Loading ramp incl. collection tray and grating for manual loading § Service hatch for cleaning activities § Mountings for fork-lift §...