Results for
AVM AUTOMATION
France
These linear guide bearings are available in cylindrical short housings or prismatic long housings. Guided on ball bushings, bronze or polymer bearings. The housing is in anodized aluminium. To build your own linear guide These linear guide bearings make it possible to create a guide unit adapted to your needs and integrated into your machine You choose the diameter of the guide rods according to load capacity and rigidity, the type of guidance (bronze, polymer, ball bushings), the guide length (long prismatic or short cylindrical bearings) and the rods spacing according to the application. You can integrate any cylinder (type, standard, brand …) by using a cylinder rod coupling. You limit the number of parts by directly using a support of your frame and your end plate. A range of stainless steel guide bearings is also available Guide Type 34X You can also use bearing blocks
Request for a quoteAVM AUTOMATION
France
Table for manual using or outside motorization Guided on ball bushings Guide tables without transmission These tables are used for manual movement or for external drives. The end plates are tapped in the center to optionally receive a hydraulic shock absorber or stroke adjustment. On request, a position clamping is available (option /BP0* on leadscrew tables). Range of linear tables with cylinder or screw transmission These tables exist, in the same dimensions, in different versions – suitable for pneumatic cylinder Type 307 – with trapezoidal screw for electric drive Type 308 – with ball screw for electric drive Type 308 – with trapezoidal screw for manual drive Type 309
Request for a quoteAVM AUTOMATION
France
Table for pneumatic cylinders ISO Ø16 to Ø40 Guided on ball bushings Protected by wipers seals More rigid than a H guide unit These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a offcentered payload in vertical, these tables allow to be more rigid than a guide unit in H. Hydraulic shock absorber on this table A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling. Use in harsh environment For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings. An anticorrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request.
Request for a quoteAVM AUTOMATION
France
For pneumatic cylinders ISO Ø8 and Ø10 Guide on bronze bearings or ball bushings The smallest guide unit in the range It’s the smallest unit, suitable for ISO6432 Ø8 and Ø10 pneumatic cylinders, allowing an ISO cylinder to be kept for small guided cylinder applications. It has a long Ushape to remain compact and have a guide length comparable to an Hshape. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). Any special stroke is possible, with a maxi stroke of 200 mm.
Request for a quoteAVM AUTOMATION
France
Very compact and economical linear guide unit for ISO 21287 cylinder Ø25 to 50 (cylinder not supplied). Access to the lateral sensor grooves of the cylinder. Short guide on bronze bearings, ball bushings or polymer bearings. Ideal for compact guided cylinder applications while retaining an ISO cylinder. 2 ranges of linear guide units for ISO 21287 cylinder Depending on the stroke and the lateral forces, 2 ranges are available to guide the rod of ISO 21287 cylinders. . 34*EC series is the most compact version, with a rigid connection of the cylinder rod directly screwed into the front plate. This model is therefore limited to cylinders with stroke up to 50 mm. . 34*EF series has a floating rod coupling between the cylinder rod and the front plate. This model can receive cylinders with a longer stroke (100 mm maximum recommended). ISO 21287 cylinder with guide unit or compact guided cylinder ? It’s more advantageous to use an ISO 21287 cylinder and a 34*EC series guide unit
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AVM AUTOMATION
France
Guide units for pneumatic cylinders ISO Ø20 to Ø50 For other cylinders (not standardized) Complete guide units, or subsets (bearings, guide rods, rod couplings) to realize a guide adapted to your need and integrated to your machine Materials used in stainless steel guides These guide units are made of 304L stainless steel for environments requiring anticorrosion and resistance to certain aggressive agents.. The scrapers are in thermopolyurethane FDA approved. Polymer bearings are in Iglidur J (dry using) Bronze bearings are impregnated with oil (oil compatible with food processing areas) The ball bushings can be with FDA grease (contact us) Precautions for use in the food industry Despite the materials used, these units cannot however be used in the direct food zone without precaution (in contact with or above food), since there is a retention zone at the level of the rod coupling and that particles or drops may ooze from the guide bearings.
Request for a quoteAVM AUTOMATION
France
Short bearing housings (cylindrical) Long bearing housings (prismatic) Guide rods Cylinder rod couplings The subsets of this range allow to realize a guide adapted to your need and integrated to your machine. Make your own guide unit To make a guide unit adapted to your needs and integrated into your machine you choose the diameter of the rods according to the load capacity you choose the type of guidance (bronze, polymer or with ball bushings) you choose the guide length (long or short bearings) you choose the distance between the rods according to the application (on your support and your plate) you can integrate any cylinder (type, standard, brand …) you limit the number of parts by directly using a support of your frame and your own end plate You simply have to guarantee a parallelism of the bearing axes by the quality of the surface of your support. A range of bearings, guide rods and rod coupling is also available in stainless steel Guide Type 34X
Request for a quoteAVM AUTOMATION
France
U guide unit for pneumatic cylinders ISO Ø32 to Ø80 Short guide on bronze bearings Protected by wipers seals Short guide for ISO15552 pneumatic cylinder This Classic Series provides antirotation of the cylinder rod. The guide is shorter than the H Classic series and is only available in plain bearings, so this series is recommended for low strokes and moderate loads. Anticorroding Uguide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series. Protection kit and back stop kit on Uguide The protection kit (tube wrapping the rods at the rear of the guide), for example allows to avoid a guarding housing on a semiautomatic machine (label maker …). The back stop kit, with hydraulic shock absorber, allows
Request for a quoteAVM AUTOMATION
France
U guide unit for pneumatic cylinders ISO Ø12 to Ø80 Antirotation guide on bronze bearings Protected by wipers seals Antirotation for ISO pneumatic cylinder This Light Series provides antirotation of the cylinder rod. With limited dimensions, it permits to use an ISO cylinder for shortstroke translations, while protecting the rod of the cylinder with its floating rod coupling. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series.
Request for a quoteAVM AUTOMATION
France
H guide unit for pneumatic cylinders ISO Ø25 to Ø125 Very sturdy guide on plain bearings Protected by wipers seals Guide unit with large rods This Heavy Series has bigger guide rods than the Strengthened series. The thick front plate also allows long centering of the guide rods for better resistance to torsion. Only available in plain bearing version, it’s recommended for important radial loads in static. Sturdy guide for Ø125 cylinder Adapted to the ISO6432 (Ø25) and ISO15552 (Ø32 to 125) cylinders, this range therefore also makes it possible to meet the more robust guide needs for Ø125 cylinders, the guide rods then being Ø40, on 4 plain bearings. Anticorroding heavy guide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and front plate are remaining in anodized aluminum (suffix /AC after the reference). Scrapers in polyurethane can be proposed for dusty or dirty environments.
Request for a quoteAVM AUTOMATION
France
Hguide unit for pneumatic cylinders ISO Ø25 to Ø125 Sturdy guide on ball bushings or bronze bearings Protected by wipers seals Sturdy Hguide This Strengthened Series has bigger guide rods than the Classic series and a thicker front plate for longer centering of the rods to increase torsion strength the plate / rods connection is generally the weak point of the Classic series when offcentered forces or loads are applied. Guide unit for Ø125 cylinder Adapted to the ISO6432 (Ø25) and ISO15552 (Ø32 to 125) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Sturdy guide on plain bearing or ball bearing ? The plain bearing version is recommended for static radial loads, short strokes, dusty environments, it’s also the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentered loads. For critical applications, we propose Heavy series.
Request for a quoteAVM AUTOMATION
France
Compact and economical linear guide unit for ISO 15552 cylinder Ø32 to 50. Short guide on bronze bearings, ball bushings or polymer bearings. Competitiveness of guide units for ISO 15552 cylinders This range is very competitive since it is 25% less expensive than a HGuide Classic Series 20% less expensive than a UGuide Classic Series 10% less expensive than a UGuide Light Series (comparison made on size 4 – for cylinder Ø32) Area of application of compact guide units These compact guides being available in ball bushings whereas all the Uguide units are generally available in plain bearings only, they are particularly interesting for simple applications at high speed like in packaging machines. It will also be used in tight spaces, but for short strokes (<100 mm), it may be advisable to use a compact cylinder ISO 21287 with the guides
Request for a quoteResults for
Bearing guides - Import exportNumber of results
13 ProductsCountries
Company type