Or press - Import export

For steam applications, condensate pots are essential. They are used to condense the fluid upstream of the differential pressure transmitter. Installed at the same height, they allow accurate measurement by maintaining a constant condensate height in the impulse lines above the differential pressure transmitter. The condensation pot can also be used to protect the transmitter in the case of a flow measurement of a corrosive / aggressive fluid. In this case we speak of separation pots. For more information, see the Frequently Asked Questions tab on this page.

Different types of pressure transmitters exist: differential pressure transmitter for measuring a pressure difference ΔP but also a relative or absolute pressure transmitter. For more specific applications, it will be necessary to use: a differential pressure transmitter to correct variations of pressure and temperature of a gas two transmitters for the same differential pressure flow element to increase the measuring range For more details on these cases, please see the Frequently Asked Questions tab on this page.

The 1''/1'' flowmeter is also called a flowmeter with flange pressure taps. The high pressure upstream measurement is 1 inch from the upstream edge of the plate and, symmetrically, the low pressure measurement is 1 inch from the downstream edge of the plate. This is often a pre-assembled complete set with orifice plate mounted between orifice flanges. Orifice flanges are standardized and manufactured to ASME B16.36. The orifice plate is manufactured in accordance with ISO 5167 or ASME MFC-3M.

The monoblock diaphragm and the ISA1932 monoblock nozzle are made from a solid round. The pressure taps are directly machined in the monoblock. They can be simply machined (pressure tapping holes) or supplied with nipples to connect directly to your installation. This type of diaphragm or nozzle has the advantage of being simple to install: simply mount it between single flanges or weld directly on the pipe for a version to be welded. All types of edges (sharp-edge, conical, quarter-circle, eccentric, segmental and multi-hole) can be made in a single-piece version. Flanged or corner pressure taps can be made in monoblock version.

The annular chamber (carrier rings) is proposed for orifice plates, for venturis and for nozzles. It has several advantages: it favors the circulation of the fluid over the complete circumference of the pipework and offers a more stable and precise averaged pressure; in the case of the orifice plate, it also allows to change only the plate in case of maintenance or change of process compared to a monoblock where the complete system must be changed. This type of mounting is particularly recommended for pipe diameters smaller than DN50.

A flow straightener greatly reduces disturbances in a flow while a conditioner reduces disturbances and also allows a good redistribution of the speed profile, at each point of the section of the pipe. Thus, these devices make it possible to reduce the upstream straight lengths and to improve the measurement accuracy in the case of a flow measurement. They are therefore to be positioned between a pipe fitting (elbow, reduction, etc.) and a flow measurement element while respecting the distances specified in the standard.

REP studies your solution! REP answers questions that cannot be resolved using conventional techniques. An "advanced" competence accompanied by the guarantees of the REP GROUP! A team of engineers is at your disposal for the study and realization of presses for special applications. A REP solution for every problem! We are able to meet your most complex requirements,

TECHNICAL SPECIFICATIONS - Reference : 006833 - PE 80 pneumatic press - 1 door - Tank capacity: 80 HL - AISI 304 stainless steel tank - Open on half conference - Washing ramp - 5.5 Kw compressor: flow rate 140 m3/h - Rectangular door with progressive opening - Food-grade polyurethane membrane - Stainless steel juice drip tray - Integrated control panel - Electrical power: 5.5 kW (in addition to the compressor) - Net weight: 2800 kg DIMENSIONS - Length : 5500 mm - Width : 2300 mm - Height: 2300 mm

For short or long term filtration, the CHOQUENET mobile filter is THE solution for your dehydration missions. The European industry has to be as reactive and flexible as possible in order to face its international competitors. In order to support our many partners in this process, we have developed filter presses that can be installed and commissioned in less than 24 hours. The entire machine and its accessories are housed in a 3-axle trailer that can be moved according to the customer’s needs.

TECHNICAL SPECIFICATIONS - Reference : 007218 - Prestige 12000 pneumatic press - 2 pneumatic doors - Tank capacity: 240 HL - Watertight tank made of AISI 304 stainless steel - Juice drainage via internal drains - Removable drains - Manhole for access to membrane - Watertight rectangular door 600x800 mm with pneumatic opening - Food-grade polyurethane membrane - Stainless steel juice drain pan - Electrical power: 16.5 kW - Tare weight: 8500 kg Connections Juice: Ø 100 outlet, MACON thread + nut with tying spigot Pneumatic: on stop valve with female thread (1'' 1/4 BSP) - Made of stainless steel - Fresh harvest, marc cuvée - Cage rotation programme controlled by the filling process DIMENSIONS - Set of feet - Height 1 m 50 - Length : 8000 mm - Width: 2950 mm - Height without extensions 2750 mm