Flow rate - Import export

The Flow-Trigger™ is an industrial flow switch designed and calibrated to confirm minimum or maximum flow rate within a pipeline. The Flow-Trigger™ combines a fully calibrated flow orifice and an explosion proof differential pressure switch to reliably monitor gas flow within the most demanding hazardous industrial environments. The Flow-Trigger™ is designed to be suitable for use with most industrial gases including hydrocarbons and corrosives like ammonia. Every Flow-Trigger™ comes complete with an orifice calibration curve and is preset to trigger at the desired set point based on the provided inlet gas specifications. The switch is field adjustable (+/- 40% of initial flow set point) after installation so that it can be fine tuned to meet specific application requirements. The Flow-Trigger™ is designed to be easily installed directly into a gas pipeline and comes complete with the required inlet and outlet pipe to maintain calibration accuracy.

EGE flow rate sensors for the flow rate detection of 10...100 l/min feature one-piece measuring tubes with an inner diameter of 20 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in circuits with corresponding pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.

Transfers varied small size products in a flow of water propelled by a pump Ideal for long distance transfers. Characteristics of the hydraulic circuit (length, elevation pressure head, etc.) depending on the required product flow rates.

PTFE seal Ø 25 mm corrugated coupling Flow rate: 80 l/min

PTFE seal Orifice: 1’’ Female BSP or 1’’ Male BSP Flow rate: 80 l/min

Nickel-plated brass manual stop gun PTFE seal Ø 25 mm corrugated coupling Flow rate: 80 l/min

Automatic stop dispensing gun for unleaded petrol 1" rotating connector Outer diameter of the spout: 20 mm Flow rate: 50 l/min

The SFS01 is particularly suitable for low flow velocities up to 3.5 m/s (in gases). It shows very fast measurement results of the flow rate as well as the flow direction. The Silicon Flow Sensor SFS01 offers three main characteristics: — Very fast response time <5 ms — Very low energy consumption — Easy system integration including temperature compensation Well-adapted channel geometries allow the performance of the sensor to be optimally aligned to the desired application. The SFS01 flow sensor is ideally suited for space-limited applications, but can also be easily upgraded to complete ready-to-use systems. Suitable application areas for the SFS01 flow sensor are flow measurements in battery-operated / portable devices, air conditioning technology (HVAC), automation technology as well as process and control engineering.

For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel

Flow monitoring Flow monitoring is a procedure that demands a reliable and reproducible surveillance of limit values and flow patterns. Flow sensors detect critical deviations of the flow rate of liquid and gaseous media. Typical areas of application are the monitoring of cooling circuits in welding applications for example, protection against dry running of pumps, as well as the flow monitoring in air ducts and air conditioning equipment. Because of the calorimetric mode the media temperature is also monitored. Flow rate measurement In addition to reproducibility, flow-rate measurement demands a defined degree of accuracy. The flow meters continuously and accurately measure a defined volume of a fluid per unit of time and are suitable for applications where qualitatively consistent process results and a steady supply of fluids is essential. We offer flow meters with calorimetric, magnetic-inductive and Vortex measurement principle for various areas of application.

The IST AG MicroFlowSens (MFS) technology was developed for fast flow measurements. Due to the membrane system, the thermal mass is reduced to the minimum resulting in a very fast response time and low power consumption. In addition to measuring flow rates, the MicroFlowSens offers an outstanding sensitivity and is able to detect flow direction. The MFS flow sensor is optimal for limited space system integration and is available as integrated sensor on a PCB. Further advantages of the MFS thermal mass flow sensor include: — Excellent solution for applications with high flow rates and fast response time in CTA mode — Very high measuring dynamic with CTA mode (10'000'000 : 1) without bypass — Excellent for the measurement of very low flow rates and leakage detection with bridge mode — High chemical resistance against aggressive gases and vapors — Different sensitivities, circuit topologies available — Detection of flow direction — Customer-specific sensor layout upon request

Description: The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5244-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

Electrodynamic flow sensor for the measurement of low flow rates from 0 to 100 kg/h. For pipe diameters up to 1 m. Ideally used in leanphase conveying. In free fall conditions with at least 2 m/s drop speed. • suitable for very low concentrations • ceramic coating prevents sensor wear

The precision volume dosing unit eco-PEN600, made by ViscoTec, enables many applications in the low to medium viscosity dispensing range. It is ideal for dosing grease, paint, sealants, adhesives, oil, silicone, generally abrasive media and many other materials. The preeflow® eco-PEN is a rotating, absolutely pressure-tight displacement system consisting of a self-sealing rotor and stator. The controlled rotary movement of the rotor generates the flow by displacing the medium in the stator. Pumping without changing the medium is guaranteed. As the material can also be conveyed backwards, preeflow® guarantees a clean, controlled material or medium tear-off without dripping.

The MEMDOS SMART LB stepper motor pump impresses with its compact design and intelligent drive concept. This pump combines the space advantages of a solenoid diaphragm dosing pump with the high precision of a motorised diaphragm dosing pump. The MEMDOS SMART LB series is available in five different performance ranges to meet the most diverse requirements. Its drive is fully adjustable, which enables flexible adjustment of the dosing capacity. The stroke frequency can be adjusted manually and continuously from 0 to 100 %, ensuring precise control and customisation for specific applications. This combination of compactness, precision and adaptability makes the MEMDOS SMART LB the ideal solution for numerous dosing tasks. The value of the maximum delivery rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The MEMDOS SMART LD stepper motor pump is characterised by its compact design and intelligent drive concept, which combines the advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven diaphragm dosing pump. This pump is available in five different performance ranges to cover a wide range of applications and meet clients' specific requirements. The fully adjustable drive of the MEMDOS SMART LD enables flexible and precise control of the dosing capacity. The infinitely variable adjustment of the stroke frequency allows the pump to be optimally adapted to the respective requirements. A special innovation of the MEMDOS SMART LD is the integrated positioning detection. This function ensures that no overdosing occurs if the pump stops unexpectedly, which prevents potential downtime and increases operational safety.

Examples of materials for dosing: 1- and 2-component epoxy, UV / light-curing / thermosetting adhesives, highly filled materials, anaerobic adhesives, shear-sensitive adhesives, heat-conducting paste, sealants, flavourings, silver conductive paste, flux, perfume, isopropanol, industrial oils, silicone, alcohol, grease, paint and ink, MEK, braze paste, PU, acetone, petrol and many others. The preeflow® eco-DUO is a rotating, absolutely pressure-tight displacement system consisting of a self-sealing rotor and stator. The controlled rotary movement of the rotor generates the flow by displacing the medium in the stator. Pumping without changing the medium is guaranteed. As the material can also be conveyed backwards, preeflow® guarantees a clean, controlled material or medium tear-off without dripping. Application: - point dosing, with highest volumetric accuracy - bead application with application speed adjustable to the web speed - Potting technology

Advantages High flow rate Various endless-filter belts or non-woven fabric can be used Cleaning system for endless filter belts Highly economic Area of application Vacuum filters are used for the cleaning of coolants, e.g. for central filter systems with high flow rates and machining processes like turning, drilling and grinding. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium oil and emulsion Filter material filter belt

Advantages Simple, compact design Area of application Various filter sizes and the modular design enable any required flow rate. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S9 Filter aid - Filtration degree 10 µm - 5 mm Medium Oil, water Filter material Perforated Plate Cylinder

Advantages Highly recommended for large flow rates Large filtration area per filter dome Highest filtrate quality Area of application For high demands on the filtrate quality (micro filtration) as in grinding processes, honing processes, finishing, lapping and eroding. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Classification number - Filter aid with Filtration degree 3 µm Medium Oil Filter material filter cartridges

Advantages Micro filtration Area of application Chemical industry and drinking water treatment Flow rate Various filter sizes and the modular design enable any required flow rate. classification number P62 Filter aid - Filtration degree - Medium Methyldiethanolamine (MDEA), drinking water Filter material Activated Carbon

Advantages Certified Gas Separator; maintenance-free operation Area of application For the use at refuelling points of aviation fuel, gasoline and hydrocarbon Flow rate Various filter sizes and the modular design enable any required flow rate. classification number P54 Filter aid - Filtration degree - Medium Kerosene, fuel, hydrocarbon Filter material -

Advantages Optimal dimensioning due to the modular design; any flow rate; high filtration capacity; automatic cleaning; minimal pressure loss; optimal backflush effect Area of application For the filtration of matters in refinieries Flow rate Various filter sizes and the modular design enable any required flow rate. classification number F29 Filter aid - Filtration degree 25 - 50 µm Medium Diesel, oil, LCO, VGO Filter material Slotted tube Cartridges

Advantages Optimal dimensioning due to the modular design; any flow rate; high filtration capacity; automatic cleaning; minimal pressure loss; optimal backflush effect Area of application For the filtration of matters in refineries Flow rate Various filter sizes and the modular design enable any required flow rate. classification number F28 Filter aid - Filtration degree 25 - 50 µm Medium Diesel, oil, LCO, VGO Filter material Slotted tube Cartridges

Advantages Compact design Low assembly requirements Very economic due to compact and standardized design Area of application For high demands on the filtrate quality in grinding processes. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium oil Filter material filter cartridges

Compact design Low pressure loss Integrated test ports Cooling capacity up to 500kW Flow rate up to 850 l/min

Advantages Parallel alignment of multiple magnetic separators enables a large flow-rate Extrem durable construction Magnetic rotor up to 1.600 mm width High filtration degree due to optimized design Area of application For the separation of ferritic impurities out of coolants with low requirements on the purity degree, as well as a pre-cleaning step in front of filter systems. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number - Filter aid without Filtration degree - Medium oil and emulsion Filter material magnetic rotor

Advantages Filter aid-free filtration Compact design Applicable for various machining processes Area of application For high demands on the filtrate quality in grinding processes. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 5-10 µm Medium oil Filter material filter cartridges

Advantages Simple, compact design Area of application For the filtration of all types of liquids; protection filter for pumps and volumeters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S7 Filter aid - Filtration degree 10 µm - 5 mm Medium oil, water Filter material perforated plate cylinder