Filter cloth - Import export

With FTJ-filter cloths, you can choose from approx. 40 high-quality fabric qualities, which fit your needs. The cloths consist mainly of polypropylene, polyester, polyamide and cotton. We would be pleased to advise you competently in the selection of the right filter cloth. In order to achieve the best results, fabric quality, grammage, air permeability and surface finish must be optimally tailored to your individual requirements. You can also get under-cloths at Filtertechnik Jäger. Drainage and cake drying can be improved. They also protect the upper cloths from mechanical wear. Special versions: Edge reinforcement Edge coating Reinforcement at supporting cam area Cloth collar from different materials Velcro fasteners Under-cloths/supporting fabric

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The tertiary filtration is strongly influenced by the hydraulic profile of the plant, which often cannot be changed. In the PECV VM (VM = metal tank) disc filters series the collection shaft is placed vertically. The goal is to feed equipment completely submerged even with very low hydraulic profiles. Even for this series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PECV VM solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 10.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the PEC – PEC VM (VM = metal tank) series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PEC – PEC MT solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 20.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The PPC – PPC VM (VM = metal tank) series was developed for plants with medium-large potential. For filters in this range, cloth washing is done with two pumps only (of which one backup pump) which serveall the discs. The selection of discs on which to conduct the backwash (in sequence) is carried out by using double-acting valves with pneumatic control. The largest standard model in this series has a filtering surface of 160 m2 that can process a load equal to a community of approximately 50.000 PE. A singular feature of this series is the low energy consumption, even more noticeable with the increasing plant potential. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength.

Patterned 3 Ply Mask patterned face mask the outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air; The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable. The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

Qaro black faces korean Type Best KF94 FFP2 Mask outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air; The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable. The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

Meltblown heartbeat patterned disposable mask is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air; The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable. The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

Qzer mouds mountain daisy patterned quality FFP2 mask the outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air . The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable.The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

Patterned face mask the outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air; The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable. The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness. perfect to Protects from dust, bacteria and pollen with 3 layer structural protection

Patterned face mask the outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air; The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable. The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

Qzer mouds series flower art patterned quality FFP2 mask the outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air . The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable.The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

Cherry blossom patterned face mask More safe & convenient the outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air; The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable. The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

Meltblown funny face patterned face mask the outer layer is made of waterproof nonwoven fabric, which can block liquid, pollen and dust in the air; The middle layer is a meltblown cloth filtering; The inner layer is soft and skinfriendly nonwoven fabric which can absorb exhaled heat and make skin comfortable. The Medizer mask has wire fixing nose guard, which fits the face more closely and provides a wider range of seamless protection. In order to relieve the pressure caused by wearing the ears for a long time, the earloop of face masks are designed to be lengthened and thicken, so as to obtain the maximum comfort and firmness.

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

We have a well-stocked warehouse with wire-cloth from our own production in all common materials enabling us to respond quickly to our customers needs. Individual specifications can be specially produced on request.

Privacy filter with magnetic attachment. Prevents others from reading your screen from the side and protects against dirt. Including bag and microfibre cloth. • Magnetic privacy filter for 13.3” screens • Limited viewing angle of 60 degrees protects sensitive data • Idea for use in public • Incl. sleeve for storage • Matt surface and reduced blue light protect your eyes while working • Practical attachment via two neodymium magnets • Protects the screen against scratches and dirt • Can also be used on touchscreens • Incl. microfibre cloth to clean screen and filter • Compatible with screens measuring 294 mm x 166.5 mm (W x H) / 11.6“ x 6.5“ (W x H)

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the TF – TV VM (VM = metal tank) series the cloth support is made of a perforated metal sheet drum. This model is used for wastewater treatment plants of small working capacity (up to 2.000 PE) or as a secondary treatment downstream from immobilized biomass systems. It is available for installation in concrete tanks or metal tanks versions. The equipment is supplied with an electrical switchboard. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

The advantages of cloth filters and biorulli in a compact system for small community water treatment. Compact system for the biological purification treatment with biodiscs combined with cloth filter for the separation of excess sludge. The biocombi compact system features two treatment phases (biological treatment and separation of excess sludge) gathered in a single tank. The standard model provides the complete provision of a carbon steel tank treated and painted with a fiberglass modular cover easily removable, and an electrical switchboard on the machine with IP 55 protection. The moving parts (disc roller and drum filter) are actuated by a single geared motor with power included between 1,10 and 1,50 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Increased floor space (compact construction)

This equipment was developed some years ago in food processing industry. Its qualities in thickening as well as in clarifying involved the present use of this equipment in a lot of industries. It replaces now the decanters with numerous advantages : Reduced space on the floor Much better turbidity of filtered liquids Very efficient thickening Specificity of the EXOFALC filter The filter cloth is perfectly adapted to the candle size ; the low amplitude with respect to its support avoids its deformation. 

The filtered juices are not in opposition when they are removed what conferes to the candle a specific large flowrate and a juice turbidity which becomes rapidly better than with a frame filter with outlets in opposition. EXOFALC filter performances Specific flowrate (depending on the slurry) from 1 to 2.5 m³/m²/hr Slurry concentration : from 160 gr/l to 540 gr/l depending on application

Glass vessel: 10 - 300 liter Stirred nutsche filters are used for filtration as well as for solid phase peptide synthesis (SPPS). Solid phase reactors can be equipped for fully automated processes. Stirrers are provided in glass-lined steel, Hastelloy® or stainless steel. The stirrer height can be adjusted pneumatically under full vacuum operation condition, enabling squeezing of the slurry. Pressure: -1.0 (FV) to +1.0 bar Temperature: -60 °C to +200 °C Filter cloth: Mesh size 8 to 115 micron Material: Borosilicate glass 3.3, PTFE, PFA, ETFE, glass-lined steel

Nutsche filters for reactors and pilot plants Glass vessel: 10, 30, 50, 100, 140, 300 liter Pressure: -1.0 (FV) to +0.5/ 1.0 bar Temperature: -60 °C to +200 °C Filter cloth: Mesh size 8 to 115 micron Material: Borosilicate glass 3.3, PTFE, PFA, ETFE A clean-room setup and other materials are available to meet your specific process requirements. Buchi nutsche filters can easily be combined with our reactors for solid / liquid separation after the synthesis. The inert materials allow safe processing in an inert atmosphere of a wide range of solvents and acids in a completely sealed (buchiflex) glass system under full vacuum. The slurry is transferred into the filter. The solid content in the slurry is held back by the filter cloth forming a filter cake, while the filtrate runs away to the outlet valve in the bottom plate. The filtering stage ends when the filtrate is of small quantity, which can be shortened by squeezing the filter cake by turning the height adjustable stirrer.

Component for Filter Dryers Containment systems (isolators, also glove boxes) allow for protected taking of samples, discharging of products, packaging the products in cladded barrels or other containers, the discharge of residual heel for a full product yield as well as filter cloth disposal whilst fully protecting the operating staff whereby at the same time a contamination of the product is avoided. The isolator is connected with the aid of a flange around the discharge stopper at the filter dryer.

The Rotavac Lab is a fully functional and representative lab scale rotary drum vacuum filter (RDVF) and filtration system, generally used for product evaluation tests or as a preliminary step towards pilot scale and full scale equipment trials. The unit can be used to validate the suitability of this type of continuous vacuum filtration equipment. The equipment offers the advantage of an easily interchangeable discharge system so that different configurations can be trialled if required. It is supplied with a control panel for modifying drum and agitator speeds and, when using a precoat discharge, the knife advance rate. A separate skid mounted feed tank, mixer and feed pump is included with the RDVF. The unit is easy to assemble and we can provide full detailed instructions including photographs at the point of hire. We include filter cloths from our extensive range of fabrics. Please contact us for more information if you are interested in purchase or hire of this lab filter.

COMBER Pressofiltro® Series PF 50 - PF 2000 with Containment System Pressofiltro® agitated Nutsche filters or filter dryers with containment system provide protection of the operators against hazardous materials and equally provide product or process safety against possible contamination from external particles. Special properties for the customer’s benefit: Containment systems (glove boxes) are designed to allow contamination free sampling, product discharge, heel removal and product pack-off into suitable containers Containment systems are available as passive, active, single chamber, two chamber and multiple chamber designs, all in compliance with cGMP and FDA guidelines Active isolator units are equipped with air handling systems and HEPA inlet and exhaust filters for containment levels down to 10 ng/m³ TWA The isolator design permits sampling, product discharge, pack-off, heel removal and filter cloth disposal in a single unit Sample and small items transfer using optional...

MSE stainless steel filter presses comply with the high hygiene and purity standards both in design and processing. With the stainless steel filter press, all components in contact with the product are covered with high-quality stainless steel. This also provides optimum protection against corrosion. FDA-COMPLIANT SOLID-LIQUID SEPARATION WITH THE MSE STAINLESS STEEL FILTER PRESS A large number of materials with different properties are used in the food sector in particular. Here, especially care must be taken to ensure that no ingredients are released into the food. The law stipulates a FDA certification for this. Accordingly, all materials used must be FDA-certified. The FDA certification stands for high purity and durability. Each component such as the filter plates, filter cloths and piping systems complies with the FDA guidelines. This contributes to high hygiene and safety requirements.

CellTRON® FOR MAXIMUM FILTRATION REQUIREMENTS The basis of this plant is a membrane filter press. The new product series is equipped with an innovative filter press emptying system with lifetime error message, an automated filter cloth washing system with implemented CIP cleaning function as well as an automatically opening and vacuum-proof housing. In contrast to conventional filter presses, this new development guarantees an almost gastight encapsulation of the filter press. The filter press thus meets the specific requirements for dewatering special (metal) sludges. In addition to standard configurations for battery cell production, this technology series is also suitable for demanding applications that require the highest safety and efficiency standards. These include volatile, dust explosive products as well as substances with toxic and radioactive properties but also pharma food products and hot suspensions (≥130°C).

Pressure Filters The Filter is composed of a pressure tank containing the filtering elements and the washing device or dry cake removal system. The filtering elements are vertically mounted cloth covered plates in Stainless Steel/Titanium/PVC/PE/PP (so called leaves) or special candles (made in plastic materials or stainless steel).

The Hybrid Collector is the combination of an Electrostatic Precipitator (ESP) with a Hamon Fabric Filter with suitable air to cloth ratio. In a Hybrid Collector, the fabric filter is located either downstream of the ESP or within the casing of the existing ESP by replacing one or more fields of collecting plates with the fabric filter modules. The Hybrid collector can help bring particulate emissions into compliance due to the fabric filter collecting higher levels of particulate, and finer particulate, than an ESP of an equivalent footprint

EMMITEX® sewing threads set standards in the manufacture of technical textiles as well as outdoor and architectural textiles. In particular, they are used in filter media for industrial gas cleaning and solid/liquid separation. They are durable, tensile, temperature and absolutely UV resistant and are resistant to alkalis, acids and oxidizing agents. Preferred applications are the production of: - Filter media for industrial gas cleaning (for example as filter tubes and filter bags) - Filter media for solid/liquid separation (for example as disc filters, belt filters, filter press cloths) - Outdoor textiles (for example as awnings, sun protection fabrics) - Architectural textiles