Results for
GERMANBELT SYSTEMS GMBH
Germany
germanBond® REPAIR Applications: One component repair compound for the filling of damaged areas of rubber conveyor belts such as fabric conveyor belts or steel cord conveyor belts, rubber linings, drums/conveyor belt pulleys and cylinders. Specifications: Colour: black Final hardening after: approx. 24 h (at 20°C) Application quantity: approx. 1 kg/m² for 1 mm thickness Oil resistance: oil resistant according to DIN 53521 Shrinkage: 15 - 20 % Hardness Shore A: approx. 65 ° (after complete curing) Packing units: 1.0 kg Downloads: Safety Data Sheet germanBond® REPAIR - English [PDF] Application Instructions germanBond® REPAIR - English [PDF]
Request for a quoteSEMIN
France
TECHNICAL DEFINITION • White fine grain repair filler for interior and exterior use • Does not shrink • High resin content • FINEX SYSTEM is a multi-purpose filler, which allows to fill holes and cracks, and to repair windowsills and damaged angles ACCEPTED SUBSTRATES Cement, concrete, bricks, concrete blocks, stone, aerated concrete, plaster, old paint, old tiling. SUITABLE SURFACES Once completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION Ultra-light ready mixed filler for repair of interior or exterior walls and ceilings. Shrink free and fast drying, SEM-LIGHT is ideal for high quality filling jobs and is very ease to use. COMPOSITION AND APPEARANCE Resins in emulsion with lightening agents and various additives. The paste is snow white. ACCEPTED SUBSTRATES Interior and exterior walls and ceilings • Plaster • Masonry • Cellular concrete • Concrete • Plasterboard • Roughcast • Wood • Cement render TECHNICAL CHARACTERISTICS • Density : 0.4 • pH : 7 • Shrink-free filling • Excellent application qualities STORAGE 12 months in unopened original packing protected from frost and extreme heat. PREPARATION OF SURFACES BEFORE APPLICATION The substrates must be clean, free of dust and any trace of formwork release oil. Indoors, during hot weather or on absorbent substrates the surfaces may be dampened slightly. Cracks should be opened up before application.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA repair filler (art. no. 5100001) is used in order to repair casting resin moulds. The filler is mixed with 1 – 3 % hardener powder.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
Filling compound such as epoxy resin filler (“epoxy putty”), fine filler or repair putty are used for corrosion protection, repairing scratches and unevenness in metal, wood and fibreglass-reinforced plastics. These coatings are mainly used in boat building.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RIGA WOOD GMBH
Germany
Riga Ply Birch plywood sanded on both the faces. Birch plywood has a wide range of application. Plywood is composed of 1.4 mm thick veneers by cross bonding. Riga Ply is the basis for all other types of plywood products. Grades B (I) - for high quality painting, staining and lacquering. S (II) - for good quality painting, staining and lacquering. BB (III) - standard grade (plugged), for interior paint finish and coating with transparent and non-transparent thicker overlays and films, and also veneering. WGE - plywood of WG grade without open defects (repaired with epoxy filler), for coating with non-transparent finishing material. WG (IV) - for use where surface appearance is not important, reverse grade. Advantages Environmentally friendly, durable, easily workable. Applications Riga Ply has a wide range of application for interior and exterior use: building and construction, transport, packaging, furniture, joinery, sports equipment, children toys and other applications. Sizes 1220 mm x 2440 / 3050 mm 1250 mm x 2500 / 3000 mm 1500 mm x 2500 / 3000 mm 1525 mm x 2400 / 3050 / 3660 mm 2150 mm x 3050 / 3340 / 3850 mm 2500 mm x 1250 mm Long grain birch plywood panels with the length up to 2500 mm are also available. Cut-to-size panels and machining available in accordance with the customers' requirements. Thicknesses 4, 6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35, 40, 45, 50 mm.
Request for a quoteResults for
Filler repair - Import exportNumber of results
7 ProductsCountries