germanBond® REPAIR Applications: One component repair compound for the filling of damaged areas of rubber conveyor belts such as fabric conveyor belts or steel cord conveyor belts, rubber linings, drums/conveyor belt pulleys and cylinders. Specifications: Colour: black Final hardening after: approx. 24 h (at 20°C) Application quantity: approx. 1 kg/m² for 1 mm thickness Oil resistance: oil resistant according to DIN 53521 Shrinkage: 15 - 20 % Hardness Shore A: approx. 65 ° (after complete curing) Packing units: 1.0 kg Downloads: Safety Data Sheet germanBond® REPAIR - English [PDF] Application Instructions germanBond® REPAIR - English [PDF]
SEMIN
France
TECHNICAL DEFINITION • White fine grain repair filler for interior and exterior use • Does not shrink • High resin content • FINEX SYSTEM is a multi-purpose filler, which allows to fill holes and cracks, and to repair windowsills and damaged angles ACCEPTED SUBSTRATES Cement, concrete, bricks, concrete blocks, stone, aerated concrete, plaster, old paint, old tiling. SUITABLE SURFACES Once completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA repair filler (art. no. 5100001) is used in order to repair casting resin moulds. The filler is mixed with 1 – 3 % hardener powder.
Request for a quote4CR INTERNATIONAL GMBH
Germany
Specially developed for partial painting and for spot repair procedures, this sanding filler dries after just 35 – 45 minutes at a surface temperature of 20°C. With forced drying, it can even be sanded after 10 minutes at 60 °C (plus cooling phase). Find your dealer
4CR INTERNATIONAL GMBH
Germany
Specially developed for partial painting and for spot repair procedures, this sanding filler dries after just 35 – 45 minutes at a surface temperature of 20°C. With forced drying, it can even be sanded after 10 minutes at 60 °C (plus cooling phase). Find your dealer
Create one request and get multiple quotes form verified suppliers.