Results for
THERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer NTC 10 kOhm
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Sheathing resistance thermometer Ni120 with wire and flexible sheathing design
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Sheathing resistance thermometer NTC 10 kOhm with wire and flexible sheathing design
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Sheathing resistance thermometer Pt1000 with wire and flexible sheathing design
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Sheathing resistance thermometer Pt100 with wire and flexible sheathing design
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Plug-in resistance thermometer NTC 10 kOhm
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Plug-in resistance thermometer Pt1000
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Plug-in resistance thermometer Pt100
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer Ni120
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer Pt1000
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Plug-in resistance thermometer Ni120
Request for a quoteNORELEM FRANCE
France
Hinge and caps fibreglass reinforced PA thermoplastic. Hinge pin stainless steel. Version: Hinge and caps black. Pin bright. Note: These hinges have a detent mechanism. This mechanism holds a door or lid open at three different angles or tightly closed. The hinges are available with or without guide tabs for aluminium profile slots. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.
Request for a quoteNORELEM FRANCE
France
Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Version: Hinge black. Pin bright. Note: All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate assembly, secure the hinge against rotation and make it harder wearing. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been determined under laboratory conditions. Each user must determine individually whether the hinge is suitable for the respective application. Different materials onto which the hinges are installed and the type of mounting, weather conditions and wear can influence the determined values.
Request for a quoteM.M. GRIGLIATI
Italy
Gates are made of profiles, fibreglass gratings and stainless steel accessories. The swing leaves size can be adapted to customer needs. Gates are available in the following versions: • gates for driveways with two swing leaves and manual closing - CE marked • pedestrian gates with one swing leaf and manual closing FRP gates for driveways bear the CE marking in compliance with Regulation (EU) No. 305/2011. Tested in accordance with UNI EN 13241-1 standard.
Request for a quoteERLAS ADVERTISING INDUSTRIAL AND ARTISTIC PRODUCTS
Turkey
Benches, the most important part of city life, come together with fiberglass material quality and creative ideas! With our environmentally friendly production approach, we design fiberglass benches suitable for use in parks, public spaces, banks, education centers, residences and the whole city. With our technological production line, we prepare the fastest and safest fiberglass benches in the quantity and size you want and present them to the users. We respond to the expectations of our customers and city residents with the production of waterproof fiberglass benches that are resistant to cold and heat!
Request for a quoteRONIX GMBH
Germany
Drop forged polished steel head for maximum strength and durability for a lifetime of hard work -Non-slip rubber grip handle provides a firm, non-slip grip which allows superior driving and impact absorption -Shock absorbing fiberglass core handle -Head-to-handle joint design is a non-detachable epoxy resin that remains resilient to wearing -Handle coated with polypropylene grip for additional comfort -Optimal weight distribution for better performance -Durable, resistant, long lasting tool for different kinds of applications
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TECHNO-COMPOSITES DOMINE GMBH
Germany
5door housing A 5door GRP housing for a pastillation belt was designed and built here. Its surfaces are easy to clean and all of the system components are easily accessible via the many doors.
Request for a quoteTECHNO-COMPOSITES DOMINE GMBH
Germany
Within the chemical industry, systems can only seldom be optimised using offtheshelf solutions. Generally speaking, all TC structures are developed in accordance with DIN EN ISO 14122. Certification according to DIN EN ISO 90012015 confirms the excellence of our quality management. The pultruded GRP construction profiles from Exel Composites comply with EN 13706/E23. We advise you on site and can accommodate your wishes in terms of corrosionresistant access systems. We provide design, manufacture and assembly on site, all from a single source.
Request for a quoteTECHNO-COMPOSITES DOMINE GMBH
Germany
Roof rim for trams in Karlsruhe When manufacturing and attaching the roof rim for trams in Karlsruhe, it was particularly important to ensure that the adhesive bond was secure. These dualsystem vehicles, which are manufactured by Bombardier, can reach speeds of up to 100 km/h. The GRP roof rim was attached to the vehicle body using an invisible aluminium bracket. The adhesive bonds between the aluminium and GRP were applied in accordance with DIN 6701, Class A1, and thoroughly tested in conjunction with the Fraunhofer Institut. FEM calculations demonstrate the permanent durability ofthe adhesive bond.
Request for a quoteTECHNO-COMPOSITES DOMINE GMBH
Germany
We can create mobile platforms on request. Discuss your mobile platform requirements with us. For mobile platforms we generally use GRP construction profiles manufactured in accordance with EN 13706 / E23. This ensures that the platform has a minimum loadbearing capacity. These GRP construction profiles typically have an isopolyester resin matrix. For structures that are exposed to higher chemical stress, we can also use profiles with a vinyl ester resin matrix. If profiles need to be connected with angle brackets, we generally use V4A stainless steel connectors. We do not use short GRP remnants for such connections because they are not sturdy enough.
Request for a quote4CR INTERNATIONAL GMBH
Germany
Fill imperfections on a variety of large surfaces, including steel, aluminum, galvanized and fiberglass surfaces. Will even adhere to small rust areas. Easy sanding. Including hardener.
M.M. GRIGLIATI
Italy
Fixed ladders are entirely made of isophthalic resin and fibreglass (FRP) and their wall installation is performed through FRP or stainless steel brackets. Also the screws for assembling the safety cage are made of stainless steel. Fixed ladders are of different types: 1. ladders serving machinery or plants in accordance with UNI EN ISO 14122-1/4 and tested according to UNI EN 131-2 standard; 2. ladders suitable for use in direct contact with drinking water; 3. double stringer ladders for inspection manholes with the CE marking in accordance with UNI EN 14396 standard.
Request for a quoteM.M. GRIGLIATI
Italy
Ladders, walkways and work platforms are built with pultruded profiles, FRP gratings and stainless steel accessories in accordance with EN ISO 14122 standard (Permanent means of access to machinery) within the framework of Directive 2006/42/EC (Machinery Directive). They have been conceived and designed to best meet the needs of each customer. They are entirely prefabricated in the factory and supplied in pre-assembled modules. Thanks to their lightweight (the specific weight of fibreglass is about 1/5 of that of steel) they can easily be installed on existing structures, without these having to be modified. The absence of maintenance and durability ensure a drastic reduction in operating costs. The characteristics of the materials used and the careful planning allow to create safe structures in compliance with the latest regulations in the field.
Request for a quoteM.M. GRIGLIATI
Italy
Profiles are obtained with the pultrusion technology which, by allowing to use a very high percentage of fibreglass, guarantees high mechanical performance. Standard profiles are made of isophthalic resin. On request they can be produced using other resins to meet specific customer needs. The standard colours are grey (RAL 7035) or yellow (RAL 1018). All profiles are finished with a polyester surface veil which, since impregnated with a large quantity of resin, seals the profile surface, ensuring the protection from UV rays and atmospheric agents and preventing the fibreglass from blooming. The high mechanical performance, lightness, ease of processing, resistance to chemical and atmospheric agents of the profiles, allow to create versatile and long lasting structures.
Request for a quoteKELTEKS
Croatia
The only fiberglass repair kit on the market that contains everything you need to get your work done! Made for you From professionals for professionals! Fiberglass is a very appreciative material for shipbuilding. And another great advantage is that almost any damage to fiberglass boats can be repaired.
Request for a quoteERLAS ADVERTISING INDUSTRIAL AND ARTISTIC PRODUCTS
Turkey
We produce works specific to the history, culture and traditional symbols of our cities with fiberglass quality! We take advantage of the flexibility of fiberglass production and use for Atatürk statues, reliefs, busts, monuments and decorative works. With our state-of-the-art production track, our creative and attentive team, we prepare city sculptures and monuments in desired sizes and materials without any problems. We carry out fiberglass sculpture production and application projects all over Turkey, especially in educational institutions, public institutions, municipalities, hospitals, military and museums.
Request for a quoteERLAS ADVERTISING INDUSTRIAL AND ARTISTIC PRODUCTS
Turkey
With fiberglass material resistant to weather conditions, high corrosion and chemicals, we meet all your production demands as soon as possible, regardless of number and size! We manufacture fiberglass domes for mosques and fountains, industrial facilities, storage tanks, areas where sports competitions take place, congress and seminar centers, concert and exhibition halls, greenhouses, shopping malls and educational institutions. We create stylish designs with architectural touches. Fiberglass dome will offer you a comfortable use with its long life, high tensile and bending strength, and easy portability!
Request for a quoteResults for
Fibreglass - Import exportNumber of results
203 ProductsCountries
Category