Fibreglass - Import export

Hinge and caps fibreglass reinforced PA thermoplastic. Hinge pin stainless steel. Version: Hinge and caps black. Pin bright. Note: These hinges have a detent mechanism. This mechanism holds a door or lid open at three different angles or tightly closed. The hinges are available with or without guide tabs for aluminium profile slots. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.

Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Version: Hinge black. Pin bright. Note: All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate assembly, secure the hinge against rotation and make it harder wearing. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been determined under laboratory conditions. Each user must determine individually whether the hinge is suitable for the respective application. Different materials onto which the hinges are installed and the type of mounting, weather conditions and wear can influence the determined values.

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.

Clamping joints are used to clamp round cross sections (bars, tubes, etc.) and are infinitely adjustable. The simple design together with the adjustable clamping lever permits rapid clamping.

Polyamide fibreglass reinforced. Version: Black. Note for ordering: The connecting elements are supplied in pairs. Note: The connecting elements are used to attach the two ends of the energy supply chain to the installation. Tension relief is integrated into the connecting element. The connecting elements are connected on the outer radius.

NOV FGS can offer amazingly cost-efficient long-term solutions wherever there is corrosion, either by seawater or any other corrosive liquids, via the use of GRE (Glass Reinforced Epoxy) piping in land, marine & offshore projects. Our company, established in 1956, represents and supports exclusively in Greece & Cyprus for over 30 years NOV FGS (www.fgspipe.com) -ex-Ameron- the market leader in GRE piping, as the supreme no-corrosion alternative to steel, with a rich reference list in the Industrial, Oil & Gas and Maritime fields. Almost all Greek- owned vessels are equipped with NOV FGS piping in seawater & scrubber installations, while the fire-fighting network at Hellenic Petroleum at Elefsis also does.

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.