Female bsp - Import export

PTFE seal Orifice: 1’’ Female BSP or 1’’ Male BSP Flow rate: 80 l/min

Short description: Outstanding abrasion resistance GrüloKan 250 Premium offers you much more than all common rubber sewer cleaning hoses. The especially developed composite bi-layers structure of the cover enables a very high abrasion resistance according to EN ISO 6945 (50 N and 2000 cycles max. 1g). This guarantees you a long lifetime at equal flexibility in comparison to our classic GrüloKan 250. Therefore our GrüloKan 250 Premium can be used in any situation, where all others fail. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: With polyamide inliner GrüloKan 250 Inliner offers you - besides all the advantages of a common rubber sewer cleaning hose - an extremely smooth polyamide inliner, which guarantees an obviously lower pressure drop. This minimisation of the pressure drop leads to a reduction of the engine speed which means considerable savings in fuel costs. This offers an efficiency benefit you should not miss! GrüloKan 250 Inliner is recommended especially for water conditioning and water recycling vehicles. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: For your own safety GrüloKan 250 Protect offers you all the benefits of our classical rubber sewer cleaning hose GrüloKan 250. Furthermore the yellow protection layer underneath the cover makes it easier for you to handle a high pressure hose in acccordance with the requirements of working safety. As soon as the cover gets thinner - in consequence of the rough operating conditions - the yellow protection layer becomes visible and warns you that its time to change the hose. So you and your staff members are always on the safe side. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: Rubber sewer cleaning hose GrüloKan 250 offers you all benefits of a professional rubber sewer cleaning hose. The specially developed rubbe compound guarantees a long operating life, high abrasion resistance and an extreme flexibilty. GrüloKan 250 is characterized by its easy handling, light weight and excellent pressure resistance. In addition GrüloKan 250 has a very small bending radius. The hose cover is resistant to abrasion and cut exposure, aging and water resistant. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: PU sewer jetting hose, 250 bar GrüloJet 250 is a thermoplastic sewer cleaning hose that has been developed especially for the equipment of professional sewer cleaning vehicles. The pressure carrier, consisting of double-braided highly tearproof aramid- and synthetic fibres, guarantees long endurance and therefore decreases your expenses. The GrüloJet 250 is floatable and extremely abrasion- and cut resistant. Furthermore it stands out due to its excellent flexibility, which simplifies its handling and your daily work. Being one third lighter than common rubber sewer cleaning hoses, it enables you to increase your vehicle payload. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Short description: PU sewer cleaning hose, 200 bar New in our product range is the thermoplastic sewer cleaning hose GrüloJet 200 with its pressure carrier, consisting of double-braided highly tearproof synthetic fibres and an extremely abrasion- and cut resistant polyurethane cover. With its working pressure of 200 bar the GrüloJet 200 is eminently suitable for use on sewer cleaning vehicles. Due to its extremely smooth thermoplastic lining the GrüloJet 200 shows an inferior pressure drop than customary rubber sewer cleaning hoses. Furthermore the lower weight gives you the possibility to increase your vehicle payload. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

Check Valves RV ▪ Allow single-directional flow only ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Metal-to-metal seat ▪ Maximum working pressure: 500 bar / 7250 PSI (depending on size) Check Valves RVM ▪ Allow single-directional flow only ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Metal-to-metal seat ▪ Maximum working pressure: 400 bar / 5800 PSI

Pressure Compensated Throttle Check Valves PNDRV ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ With pressure compensating feature via built-in compensating piston ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: 210 bar / 3000 PSI

Block Body Ball Valves with Threaded Connections TBV4 ▪ Four-way high-pressure block body ball valves designed for use as three-way selectors (T-bore, 90° operation) for hydraulic applications ▪ Multi-way valve with trunnion-style ball ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections XBV4 ▪ Four-way high-pressure block body ball valves designed for use as three-way selectors (double L-bore, 90° operation) for hydraulic applications ▪ Multi-way valve with trunnion-style ball ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve)

Originally designed to be used as replaceable air filter elements for STAUFF Desiccant Breathers, they can also be used as seperate air filters for hydraulic reservoirs Features ▪ Diameter of Ø68 mm / Ø2.68 in (SGB-060), ▪ Ø100 mm / Ø3.94 in (SGB-090) or ▪ Ø130 mm / Ø5.12 in (SGB-120) ▪ Equipped with female BSP thread (ISO 228) ▪ Including sealing made of NBR (Buna-N®) ▪ Threaded breather adaptors (for direct installation on top of hydraulic reservoirs)

Block Body Ball Valves with Threaded Connections CBV3 ▪ Compact three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Compact diverter style ▪ Pressure inlet possible from center port only ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections CBVS3 ▪ Compact three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Compact diverter style ▪ Pressure inlet possible from all ports ▪ With female BSP, NPT, UN/UNF thread or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections LBV3 ▪ Three-way high-pressure block body ball valves designed...

Block Body Ball Valves with Threaded Connections BBV2 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ with female BSP, NPT or UN/UNF thread, male ORFS connection or 24° cone connection ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Forged Body Ball Valves with Threaded Connections BBV2 ▪ Two-way high-pressure forged body ball valves designed for use as on/off devices for hydraulic applications ▪ with female BSP, NPT or UN/UNF thread, male ORFS connection or 24° cone connection ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Block Body Ball Valves with Threaded Connections HBV2 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ with female NPT or 24° cone connection ▪ Pressure range: up to 800 bar / 12000 PSI (depending on size and material...

Combination of air breather and water removal filter Features ▪ Light-weight alternative to the SDB series ▪ Available in 2 different sizes ▪ Diameter of Ø94 mm / Ø3.70 in ▪ Filled with drying agent (non-toxic ZR gel grain) ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Connection: Female BSP thread (ISO 228) in Plastic housing Please note that neither the air filter element nor the drying agent can be replaced when saturated. ▪ Threaded breather adaptor ▪ Adaptor plate ▪ Visual contamination indicator

SAE Blanking Flange and Counterflange BFX-CP / BAS-CP ▪ 3000 PSI Standard Pressure Series (based on ISO 6162-1:2006): 1/2" (DN13) ... 5" (DN127) ▪ 6000 PSI High Pressure Series (based on ISO 6162-2:2006): 1/2" (DN13) ... 2" (DN51) ▪ Material: S355J0 / C45 or equivalent, Stainless Steel 1.4404 on request (W5) ▪ Surface: blank, oiled SAE Sandwich Plate - Female BSP Port SPL-G1/4-L ▪ e.g. for Test Couplings ▪ 3000 PSI Standard Pressure Series (based on ISO 6162-1:2006): 1/2" (DN13) ... 2" (DN51) ▪ 6000 PSI High Pressure Series (based on ISO 6162-2:2006): 1/2" (DN13) ... 2" (DN51) ▪ Materials: S355J0 / C45 or equivalent, Stainless Steel 1.4404 on request (W5) ▪ Surfaces: blank, oiled SAE Blindplug CAG-BP SAE Blindplug (High Version) CAG-BPH ▪ 3000 PSI Standard Pressure Series (acc. to ISO 6162-1:2006): 1/2" (DN13) ... 4" (DN102) ▪ 6000 PSI High Pressure Series (acc. to ISO 6162-2:2006): 1/2" (DN19) ... 2-1/2" (DN64) ▪ Materials: S355J0 / C45 or equivalent, Stainless Steel 1.4571...

Throttle Valves for In-Line Assembly DV ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Manifold Mounting DVP ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Cartridge Assembly DVE ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for direct installation into...

Throttle Check Valves for In-Line Assembly DRV ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Check Valves for Manifold Mounting DRVP ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI

Designed for direct installation into return lines to reduce fluid aeration, foaming and noise; should always be installed below the minimum fluid level Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Design and Materials ▪ 2 concentric tubes with inner spaced holes ▪ Installation below the minimum fluid level of the reservoir with the plain area facing the pump inlet ▪ Threaded end cap made of Aluminium ▪ Other components made of Steel, zinc-plated Special sizes, designs, materials and configurations are available on request. Consult STAUFF for details. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Max. working pressure: 20 bar / 290 PSI

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

Designed to be used as lockable filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBL-C (Clamping version) ▪ SMBL-P (Screw-in version) ▪ SMBL-P (Push-on version) Features ▪ Available as clamping version (with 3 clamping jaws), as threaded version (with female BSP thread) or push-on version, suitable for stand pipe mounting with pipe diameters up to 77,5 mm / 3.05 in (secured by 3 locking screws) ▪ Key-lockable cap (2 keys included) ▪ Lock protected by rotating flap ▪ Air flow in both directions, one direction only or no direction Materials ▪ Breather cap made of Aluminium, lacquered (light-grey, RAL 9022) ▪ Breather body made of Aluminium, zinc-plated ▪ Basket made of Steel, zinc-plated or Polypropylene (PP) ▪ Sealings made of NBR (Buna-N®) (standard option); FPM (Viton®) sealed version available Technical Data ▪ Operating temperature range: -30 °C ... +100 °C / -22 °F ......

TECHNICAL SPECIFICATIONS - Reference : 007218 - Prestige 12000 pneumatic press - 2 pneumatic doors - Tank capacity: 240 HL - Watertight tank made of AISI 304 stainless steel - Juice drainage via internal drains - Removable drains - Manhole for access to membrane - Watertight rectangular door 600x800 mm with pneumatic opening - Food-grade polyurethane membrane - Stainless steel juice drain pan - Electrical power: 16.5 kW - Tare weight: 8500 kg Connections Juice: Ø 100 outlet, MACON thread + nut with tying spigot Pneumatic: on stop valve with female thread (1'' 1/4 BSP) - Made of stainless steel - Fresh harvest, marc cuvée - Cage rotation programme controlled by the filling process DIMENSIONS - Set of feet - Height 1 m 50 - Length : 8000 mm - Width: 2950 mm - Height without extensions 2750 mm

Used to join delivery tubes together. Thread 1/8” BSP Female/Female Part No. S22

Enables standard delivery tubes to be used with old style Tecalemit Hand Compressors. Thread 1/4” BSP / 1/8” BSP Female Part No. AN42