Fan units - Import export

"FFU (Fan Filter Units) that require precise cleanliness of environmental air (as per ISO 14644 standard flow environments) also need to operate in a laminar air flow in these situations. Mikropor produces Fan Filter Units with two stage filtration. Fan Filter Units ( FFU) are based on a push and pull working principle, with environmental air drawn through a G4 class coarse filter to capture relatively large particles. Thanks to Mikropor’s highly efficient HEPA class filters on the second stage, outlet air on the production lines will have the highest level of air purity. Mikropor produces standard or custom sized Fan Filter Units, designed and manufactured to meet the cleanroom application requirements."

Motor shafts. Gear and frive unit shafts. Fan shafts. Clamping tools. Applications at high speed and lo pressure.

The 2500 KW cooling tower is designed to provide high performance for a minimal unit size. The specially designed drift eliminators reduce drift to 0.002% of flow. When supplied with chilled water, the cooling tower can also be used as a bulk air cooler for applications requiring large air flow. Designed and assembled to Aggreko’s standards. Packaged into 20 ft. ISO container frame. Brentwood drift eliminators designed for forced draft. Fully enclosed and protected from direct sunlight. Fan unit driven by a variable speed drive. Controlled operation of condenser unit fans. Safe and reliable operation for rental applications. Ease of transportation, handing and protection. Reduces drift to a rate significantly lower than that required by law. Increases safety with respect to microbial growth. Regulates fan speed proportional to sump temperature. Maximises efficiency, minimises noise and prevents overcondensation when coupled with water-cooled chillers.

Our industrial 18 kW electric heater is quick and easy to install and operate. The unit has two fan speeds which allows for optimum performance under most site applications. Quick and easy to install and operate. Machine can be set at 4.5-9-18 kW. Fans can be regulated to operate at both half and full speed. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Optimum performance under most site applications. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.

For forced cooling, Seifert electronic offers compact fan units in various performance classes. The variable fin spacing in the high-performance heat sinks ensures strong cooling during fan operation. In forced convection cooling, fans are required as separate sources of convection. To ensure optimal convection during fan operation, it is recommended to incorporate heat sink profiles. The fin spacing in heat sink profiles is particularly important, as increasing the surface area is key for forced cooling. To push this boundary further, we have continuously reduced the fin spacing in our profiles. Depending on the model, up to three fans per cooler are possible, which can optionally be equipped with pressure chambers for improved air guidance. Most heat sinks are already equipped with aerodynamically designed hollow fins. Additionally, air deflectors for air guidance are available for some heat sink profiles.

Filtering plant FTC-AS 6.Bd is designed for the complete set of machines for thermal metal cutting. Productivity – 6 000 m³/h. It is installed using modular panels, which provides a modular structure of the installation. The installation is made of 2 mm thick steel with subsequent powder coating. The fan unit is located in a noise-absorbing housing. Contaminated air containing waste particles obtained during production is transported to the filtering plant and the heavier particles in the settling chamber fall into the dust collection compartment of the unit, while the air containing small light particles is filtered in cartridge filters with a PTEF membrane . The installation performs fine filtering. Cartridge filters with a PTEF membrane provide fine filtration of air with a size of solid particles from 0.3 microns, the degree of air purification is 100%, which makes it possible to return purified air to the workshop.

To get the maximum performance with minimum energy and management consumption, it is important that your cooler is always maintained at maximum efficiency. Checking the general condition of the main parts (in the case of an evaporative cooling tower: fill pack, motor fan unit, distribution, etc.), allows to maintain the functionality over time. For this purpose MITA offers a wide range of spare parts, solutions to restore and ensure the initial efficiency. Some advantages of spare parts for cooling towers and other cooling technologies. - Set of original spare parts for the first 5 years of operation: at an attractive price. - Certainty of immediate availability for original spare parts. - Spare parts corresponding to the original on request. You can also ask MITA Service for maintenance work on evaporative towers, evaporative condensers, adiabatic coolers and chillers of any brand.

Renewable energy sources are something that is becoming more relevant every day. Biogas is an alternative and here FläktComp Sweden can contribute with high-quality fans that ensure that the biogas is handled correctly. Biogas fans are a type of gas-tight radial fan, adapted for use in biogas environments where the demands on materials and performance are very high. The fans are usually delivered as a complete unit consisting of fan wheel, motor, cover and vibration feet. In order to choose the right biogas fan, one should start from operating data and process design, as well as whether there are any special requirements.

Axial fans are a type of fan that creates airflow through a fan wheel that rotates around an axis and moves the air parallel to the axis. Axial fans can also be called propeller fans and are usually delivered as a complete unit consisting of fan wheel, motor and cover. Typically axial fans are direct driven with the impeller mounted on the motor shaft. There are also other designs such as e.g. belt-driven or with shaft bearing and coupling. The axial fan’s strength is to transport large volume flows at low pressures. At higher pressures, a centrifugal fan may be a better choice. To reach higher pressures with axial fans, these can be connected in series. Usually, the efficiency of an axial fan is comparatively lower than that of a centrifugal fan. But by using guide rails, diffusers and other accessories, an axial fan can reach the same or higher efficiency. The flow of axial fans can be regulated with vane or damper or speed regulation.

A mixed-flow fan combines the advantages of axial fans with the characteristics of radial fans. Simply described, it is an axial fan with a fan wheel in radial format. This provides a cost-effective design, in duct or box design, with a stable fan curve and relatively high pressure. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit. Mixed-flow fans are usually used as ventilation fans. Typical applications are ventilation solutions in gyms, sports halls, warehouses, commercial kitchens, factories or airport terminals. Depending on requirements, the design of a mixed-flow fan can be completely adapted to the customer’s needs. With the right dimensioning and material selection, a mixed-flow fan will work problem-free for many years.

Plug fans, or chamber fans as they may also be called, offer great versatility for complex system configurations. A plug fan is a centrifugal fan without a cover that is placed in an air unit. Plug fans provide highly efficient recirculation air with the advantage that they are easy to install and dismantle in units. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually delivered for assembly in another unit. Plug fans are typically used as an internal fan in an air handling system, where the fan is mounted in an air handling unit. Typical application is for internal installation in ventilation solutions. Depending on requirements, the design of a plug fan can be completely adapted to the customer’s needs. With the right dimensioning and material selection, a plug fan will work problem-free for many years.

Garage fans is a collective name for the different types of fans used for ventilation of underground parking garages. Often, ventilation systems in garages are made up of classic duct systems. Instead, we offer complete systems with impulse fans for garage ventilation. Functions and advantages of impulse and induction systems compared to traditional duct systems: Easier and faster installation Lower construction costs Less maintenance Airier feeling (fewer things on the roof) Our many years of experience and large product range give our customers peace of mind. Development. the design and manufacture of fans for garage ventilation is carried out with the highest precision and with the highest quality materials. The fans are usually delivered as a complete ventilation system consisting of all fans, control units and other accessories.

An Impulse fans (Jet fan) ísa a type of axial fan that is adapted for operation in tunnel environments by e.g. material selection and silencer. The tunnel fans create airflow through a fan wheel that rotates and moves the air axially. They are usually delivered as a complete unit consisting of fan wheel, motor, cover, silencer and mounting stand. The flow of tunnel fans can be regulated with a frequency converter. In order to choose the right impulse fan for tunnel ventilation, one should start from operating data, tunnel design and whether there are any special requirements.

Fan Services Our services range from standard inspections and repairs to complete overhauls. A repair or overhaul of a fan generally consists of an Inspection, Repair/Modification and a final Report. Inspection The first step when repairing a fan is the inspection. Fan inspections include: Visual inspection Alignment check Checks of belts and couplings Measurement of axial clearances Disassembly + visual inspection of parts Dimensional measurements When the inspection is finished, an inspection report is drawn up with recommendations for repair. Execution of works After approval of the recommendations for repair, the execution of the repair / overhaul works begins. The scope of work may vary, but can include: Cleaning & steaming Sandblasting Preparation of technical drawings for machining by in-house engineering team Machining of parts (bearing housings, rotors, …) Balancing of rotating parts Coating of rotating parts Assembly Coating of exterior

Types of Industrial Fans Maintenance Partners provides services on various types of fans, for example: Centrifugal Axial Fan units (fan + motor) Directly driven Indirectly driven (chain or belt) Fan Services Our services range from standard inspections and repairs to complete overhauls. A repair or overhaul of a fan generally consists of an Inspection, Repair/Modification and a final Report. Inspection The first step when repairing a fan is the inspection. Fan inspections include: Visual inspection Alignment check Checks of belts and couplings Measurement of axial clearances Disassembly + visual inspection of parts Dimensional measurements When the inspection is finished, an inspection report is drawn up with recommendations for repair. Execution of works After approval of the recommendations for repair, the execution of the repair / overhaul works begins. The scope of work may vary, but can include: Cleaning & steaming Sandblasting Preparation of technical drawings for...

ILA maleend flexible duct connectors are used for joining two round SPIRAL or plain ducts. They are most often used for connecting air handling units, heat recuperation units, and duct fans. The flexible duct connector deadens the vibration generated by the equipment to prevent vibration and noise in the ductwork and ensure improved acoustic performance of the ventilation system. The flexible piece is made from AMT balancing tape, a standalone product available in different sizes and materials, including a heatresistant version. The standard version is male. The femaleended version is available on request for connecting two fittings.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54. SK fan and filter units TopTherm, 20/25 m³/h, 230 V, 1~, 50/60 Hz, WHD: 116.5 x 116.5 x 16 mm

Features 1.All steel construction raised basement; 2.Full downdraft airflow style, ensuring turbulence-free airflow path; 3.Illumination brightness reaches 1200 lux; 4.Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); 5.Sheet metal is processed to European standards; Standard Configurations -Basement: all steel construction raised basement, 5-row grating; -Fan unit: one 7.5kw intake fan, one 7.5kw exhaust fan; -Heating: Riello RG5D burner, with heat exchanger; -Lighting system: upper lights are 14*4*13W LED light tubes, lower lights are 10*4*13W LED light tubes; -Wall panel: sheet metal is molded by one-step process, four-side edge banded rockwool insulated wall panel, thickness 50mm -Ceiling structure: 14 pieces of precision punched steel panels -Roof panel: double-skin insulated roof panel -Electric control: imported electrical components, phase loss protection, overheat protection and overload protection

Features -All steel construction raised basement; -Full downdraft airflow style, ensuring turbulence-free airflow path; -Illumination brightness reaches 1000 lux; -Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); Standard Configurations -Basement: all steel construction raised basement, 2-row grating+3-row checkered plate; -Fan unit: one 7.5kw intake fan, one 5.5kw exhaust fan; -Heating: Riello G20 burner, with heat exchanger; -Lighting system: upper lights are 10*4*18W LED light tubes, lower lights are 8*2*18W LED light tubes; -Wall panel: Rock wool insulated wall panel, thickness 50mm; -Ceiling structure: punching ceiling frame; -Roof panel: single-skin galvanized steel roof panel; -Electric control: phase loss protection, overheat protection and overload protection, direct starting of motor;

Features -All steel construction raised basement; -Full downdraft airflow style, ensuring turbulence-free airflow path; -Illumination brightness reaches 1000 lux; -Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); Standard Configurations -Basement: all steel construction raised basement, 2-row grating+3-row checkered plate; -Fan unit: one 5.5kw intake fan, one 5.5kw exhaust fan; -Heating: Riello G20 burner, with heat exchanger; -Lighting system: upper lights are 8*4*18W LED light tubes, lower lights are 8*2*18W LED light tubes for option -Wall panel: EPS insulated wall panel, thickness 50mm; -Ceiling structure: welded ceiling frame; -Roof panel: single-skin galvanized steel roof panel; -Electric control: phase loss protection, overheat protection and overload protection, direct starting of motor;

Cooling via high-performance compact impellers. The LCP draws in the air at the sides at the rear of the server enclosures and blows the cooled air back into the front part of the server enclosure at the sides. Maximum energy efficiency due to EC fan technology and IT-based control Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans Control of the server inlet temperature With redundant temperature sensor integrated at the air end as standard Optimum adaptability due to dynamic, continuous control of the cold water volume flow By using high water inlet temperatures, the proportion of indirect free cooling is increased, which in turn reduces operating costs Targeted cooling output due to modular fan units Fan modules configurable as n+1 redundancy Standard 3-phase connection for electrical redundancy The separation of cooling and enclosure prevents the ingress of water into the server enclosure

Rotary convection oven has been designed especially for producing cake, pastry, sandwich bread at pastry shops, restaurants, hotels and bakery shops. Owing to rotary platform and heat circulation systems with double fans, in each place on the tray that provides equal heat distribution and baking balance. The oven can be produced with touchscreen or manual control panel. The oven can be produced with Electric or Gas heating systems. The oven manufactured by stainless steel. Energy saving was ensured with a good heating insulation. It works safely owing to it’s limit key rotary platform system and two pieces security thermostats. The required steam quantity supplies by the cascade type powerful steam generator. Hood at the top of the oven is a standard hardware with a aspirator fan. Fermentation unit can be placed bottom of the oven which provides humidity and heat for fermenting products. Option Electric or gas heating system / Manual or touchscreen control panel

Compact filters are characterised by the fact that they essentially unite fan, filter element and discharge or dust collection facility in one. The capacity range of the compact filters extends up to 20,000 m³/h. Different systems and modes of operation are available for the individual assemblies, resulting in a large number of possible variants. This allows us to offer a large range of solutions for dedusting tasks. Based on our many years of experience, we select the filter media from those available on the market that are best suited for the most diverse types of dust and tasks. Filter hoses, filter bags, filter tubes and filter cartridges are used as filter elements. Cleaning takes place using compressed air impulse, low-pressure purge-air or shaking. Fans from own development and production enable us to design a highly efficient and precise layout. Discharge usually takes place directly into collecting containers, such as dustbins with snap fasteners, or into containers, big bags, or via discharge mechanisms into automatic disposal systems. Screw conveyors, drag conveyors, rotary systems, cellular wheel sluices, double-gate sluices and slidegate valves are available as discharge mechanisms. Intelligent control systems, piping elements, silencers and pre-coating devices for auxiliary dusts are standard items in the range. Naturally we also use our know-how to create needs-based custom solutions.

Truck Booths are designed for repairing, painting and baking such as large bus, truck, boat, agricultural vehicle, industry machine, aircraft etc. Most of orders are customized according clients requirement.1. The main room: *Wall panel：EPS Sandwich style, Thickness 50mm. rock wool optional *Basement: Concrete Structure made by the customers, 2 rows of grids *Door: 4 pieces of front door without aluminum side cover. 2 pieces of emergency door with pressure lock2. Generator System: *Two units of 11 kw intake fans and two units of 11 kw exhaust fans. *2 pieces of floor filter and 2 pieces of air mouth filter. *2 sets of exhaust/intake ducts, 5 meters straight, one 90° bend, and one 60° bend each. *2sets of chimney, 5 meters straight

The VolumION is a very robust ionizing air blower with an effective ionising width of 500 mm. The VolumION consists of a motor, two fans and an ionisation unit. Ambient air is drawn on two sides and blown off along three anti-static bars. The air flow that is drawn in is adjustable on both sides. This ionising air blower is also ideal for long range neutralising when paper and film webs are being wound. The air inlets can be fitted with a special filter. Features - Working distance: 1500 mm max. - Working width: 500 mm - Ideal for long range neutralising when paper and film webs are being wound - Built-in shockless anti-static bars - The air inlets can be fitted with a special filter

The iGRAIN Relay Output Unit is a control module designed for automatic control of aeration and head space ventilation fans. The unit is controlled from the iGRAIN Dashboard Manager or control board via RS485 MODBUS. Each unit has 8 relays with NO (Normally Open) and NC (Normally Closed) relay contacts and the status of each relay is indicated with a diode. Each relay unit can be set to an individual address and be installed remotely where the aeration power relays are located. The unit is normally only used for aeration control if there is no PLC/SCADA system available. Advantages • Status and control by iGRAIN Dashboard Manager • Easy control board mount • Operates in either manual or automatic mode via the aeration control software

The ROTIMAT 1A has been designed for the spray cleaning of all workpieces that can be placed in the sturdy rotating basket. After production or repair, the workpieces and parts are cleaned with a hot aqueous cleaning medium that is sprayed onto the parts from all sides. The unit can be loaded from the front, or from the top, using lifting gear. The compact machine is equipped with four castors for easy relocation within the factory. Cleaning with aqueous media (acidic, neutral or alkaline) Universell cleaning unit for many different workpieces Compact portable unit with castors Drying without external heat input, or with optional extractor fan Available as 1bath unit with loading of the unit via Manual loading

EC technology: New EC technology is a revolution in electronic drive technology. It enables precise adjustment to output requirements thanks to its continuously variable operation. Easy installation Drill 4 x, screw and KaCool W is already on the wall. It could hardly be easier to work with! And if the need is not known beforehand: now you know how easy it is to retrofit the KaCool W. Variety of variants The product range gives you freedom of choice: on-site or separate infra-red control, or a wide selection from the Kampmann control range Easy access All the components are compactly installed inside the unit and so are easily accessible. Discreet Elegant enough to notice - discreet enough not to stand out. Subtly creating the perfect climate.

Electrical and electronic equipment mounted inside a cabinet generate heat that raises the temperature internal air. Over time, the ever increasing heat can cause sensitive devices to malfunctions. Additionally, heat accumulation can cause circuit breakers to trip which can result in system shut down. Fan filter units are used for enclosure climate control to dissipate heat from within the enclosure to prevent the premature failure of the equipment inside it. It helps to increase an operational reliability and a service life for electrical and electronic systems. Filter fans will cool enclosures to a level slightly above the ambient temperature outside the cabinet. To cool enclosure contents, the fans draw filtered ambient air into the cabinet. At the same time, the heated air within the cabinet is blown out an exhaust. The exhaust is also filtered which creates airflow resistance and a slightly higher pressure inside the enclosure.