Equipment suction - Import export

OB2012 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and two-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 350x240x120 mm Weight: 4.6 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

Plunger Operated for Gearbox Filling & Emptying. With Flexible Suction Tube. Colour: Black Suction Oil Gun 500cc Suction Oil Gun 1000cc

Suction equipment comprising: 3/4" elbow joint with sleeve 1 metre of Ø 32 mm hose Foot valve

Suction equipment comprising: 3/4" elbow joint with sleeve 1 metre of Ø 25 mm hose Foot valve

Designed to be installed in many circular clarifier tanks with flat or slightly sloping bases. Generally used for the treatment of urban or industrial wastewater containing solids that settle quickly and where it is important to be able to remove the sludge as it forms. Aluminium support beams Stainless steel feed well: at the bottom, which dissipates the effluent inlet and at the top, and assists in the sludge being raked towards the sludge discharge cone Sludge cone: collects the sludge transferring from the base of the tank through the suction tubes Suction tubes equipped with extended control valves Stainless steel weir plate and arm for the transfer to the overflow of clarified water

Counterweight system for suction units with a bearing load of over 1000 kg. Secure mounting under protrusions of up to 1.5 m. Can be hitched onto any construction tower or truck crane.

The B80 KGK G3 series is a powerful and robust submersible centrifugal pump with plain bearings, drive lantern mounted on anti-friction bearings and IEC standard motor. The B80 KGK G3 series is designed in single or two-stage versions with one or two impellers for high flow rates. Multistage pumps are used to increase the delivery pressure while maintaining compact hydraulic dimensions and are used in particular in processes with high delivery pressures at low flow rates. They are perfectly designed for industrial use in closed unpressurized tanks, basins or pits. * suitable for flow rates up to 270 m³/h * equipped with a suction strainer as standard * a suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & Advantages * vibration and oscillation free operation * Efficient and space-saving design due to 1- and 2-stage pump hydraulics * Long operational reliability

The B80 KGK G1 series (with closed impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern on roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation. * Suitable for flow rates up to 30 m³/h * equipped with a suction strainer as standard * suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & advantages * No screws in contact with the medium * Vibration and oscillation-free operation * Long service life and operational reliability * Lifetime grease-lubricated roller bearings * Independent bearings for motor and pump * External flushing to protect the plain bearings with media containing solids

The B80 KGK G2 series (with open impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern with roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation. *Suitable for flow rates up to 80 m³/h * equipped with a suction strainer as standard * suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & advantages * No screws in contact with the medium * Vibration and oscillation-free operation * Long service life and operational reliability * Lifetime grease-lubricated roller bearings * Independent bearings for motor and pump * External flushing to protect the plain bearings with media containing solids

OB1000 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 320x250x100 mm Weight: 3.5 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB500 medical suction unit equipped with autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles The device is designed for medical vehicles and is stationary, not portable Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP32d Functioning: 12÷15 Vdc Maintenance-free piston pump Vacuum control and regulation unit with ABS module Dimensions of suction unit: 175x175x100 mm Dimensions of ABS module adjustment unit: 90x130x85 mm Weight: max. 2 kg including mounting parts Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB500 medical suction unit equipped with OB-J collection jar for 1000 ml SERRES® disposable bags The device is designed for medical vehicles and is stationary, not portable Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP32d Functioning: 12÷15 Vdc Maintenance-free piston pump Vacuum control and regulation unit to be embedded on the wall Dimensions of suction unit: 175x175x100 mm Dimensions of standard built-in adjustment unit: 53x110x70 mm Weight: max. 2 kg including mounting parts Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB MINI medical suction unit equipped with: 500 cc collection jar in autoclavable polycarbonate external mains-voltage EU power supply with 2-pole plug (mains power supply between 100 and 240 Vac) Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP43 Functioning/charge: 11÷30 Vdc Inorganic solid-type lithium polymer battery. Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user. The OB MINI suction unit is equipped with an internal microprocessor control that allows the storage of device construction and operating data. A special function alerts the user of the need for a scheduled device maintenance Dimensions: 290x240x95 mm Weight: 1.8 kg complete with accessories

OB1000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 320x250x100 mm Weight: 3.5 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB3000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 33 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP44 Functioning/charge: 11÷30 Vdc Maintenance-free piston pump Inorganic solid-type lithium polymer battery. Fluorescent analogue vacuum gauge for checking even in poor visibility conditions, also available with mmHg (millimetre of mercury) scale on request Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user. The OB3000 suction unit is equipped with an internal microprocessor control that allows the storage of device construction and operating data.

OB3000 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 33 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP44 Functioning/charge: 11÷30 Vdc Maintenance-free piston pump Inorganic solid-type lithium polymer battery. Fluorescent analogue vacuum gauge for checking even in poor visibility conditions, also available with mmHg (millimetre of mercury) scale on request Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user.

PROFI vacuum mattress, made of high-strength fabric, intended for the immobilisation and transport of polytrauma patients The mattress includes a semi-rigid support in which 8 handles for lifting and transport are located Suction valve located close to the head on the outer side, easily accessible even with immobilized patient Equipped with 3 immobilisation straps Radio-transparent Equipped with 3 internal suction chambers for better adaptation to the anatomical shape of the patient Dimensions: 205x95x10h cm Weight: 10 kg In compliance with the standard EN 1865-1 It is a CE medical device in compliance with the European Regulation MDR 2017/745

PROFI EVOLUTION vacuum mattress, made of high-strength fabric, intended for the immobilisation and transport of polytrauma patients The mattress includes a semi-rigid support in which 8 handles for lifting and transport are located Suction valve located close to the head on the outer side, protected by the semi-rigid support, easily accessible even with immobilized patient Equipped with two specific holes for fixing the mattress to metal stretchers used in air rescue operations Equipped with 3 immobilisation straps Radio-transparent Equipped with 3 internal suction chambers for better adaptation to the anatomical shape of the patient Dimensions: 205x95x10h cm Weight: 8.2 kg In compliance with the standard EN 1865-1 It is a CE medical device in compliance with the European Regulation MDR 2017/745

SDM vacuum mattress, made of high-strength fabric, intended for the immobilisation and transport of polytrauma patients. Equipped with 8 handles for lifting and transportation Suction valve located close to the head on the outer side, easily accessible even with immobilized patient Equipped with 3 immobilisation straps Radio-transparent Equipped with 3 internal suction chambers for better adaptation to the anatomical shape of the patient Dimensions: 200x80x6h cm Weight: 7 kg In compliance with the standard EN 1865-1 It is a CE medical device in compliance with the European Regulation MDR 2017/745

The feeding station (hopper) minimizes dust spillage through the blower and filter stand when manually opening and discharging the bag of material into the production line, thus keeping the working environment clean. Vibrator, filter, magnet, vibrating bridge destroyer, material suction equipment and feeding screw are all optional equipment.

Quick suctioning immersion pumps equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. Volumetric delivery up to 280 l/min Delivery head up to 8,5 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SAL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 115 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The STL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 200 l/min Delivery head: up to 80 m Please contact us for delivery quantity

Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2500 l/min Delivery head: up to 46 m Please contact us for delivery quantity

Based on years of experience in oilseed pressing and processing, Yongming machinery has designed two processes: cold pressing and hot pressing. The cold pressing process can retain active nutrients, reduce the color of crude oil, and produce oil with a strong flavor when using the hot pressing process to meet the needs of different users. Moreover, the oil yield is high and the production cost is low. The entire production line is equipped with advanced cleaning, pressing technology, and refining technology while paying attention to energy conservation and environmental protection, reducing emissions, saving costs, and maximizing corporate profits. Given the environmental protection and workshop hygiene requirements of modern industry, this production line is equipped with a complete dust removal system, and all connections for material transportation are equipped with suction to meet production and environmental protection requirements.

Mobile filter presses are particularly suitable for dewatering sludge from several plants at regular intervals or for compensating capacity peaks and bottlenecks. The fact that mobile filter presses are not subject to approval obligation and are therefore quickly and unbureaucratically available is particularly interesting. MSE mobile filter presses are fully equipped and immediately ready for operation after connection of the sludge, water and power supply. In this way, the best possible result can be achieved for every task. Mobile filter press plants can be implemented in many different designs. The sizes of the mobile filter presses are available up to a maximum size of 1200. This corresponds to about 100 chambers and about three cubic meters of chamber volume. The plants are equipped with suction and pressure-side inline mixers. The PLC plant controls the conditioning parameters in proportion to pressure and/or volume.