Emission measuring equipment - Import export

Multisensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced probe electrification multisensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not necessary. • PRO version permits multichannel networked system for plantwide monitoring of emissions (for up to 32 sensors) • full colour, icondriven menu and display • two independent alarm set points • relative dust reading on clear scale 0100% • dust 'overrange' icon • security setting • digital signal processing • field upgradeable

Stand alone cross stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. • emissions measurement (mg/m³) • advanced sensor design includes automatic drift checks • resistant to contamination • simple installation, setup and maintenance • external display and keyboard for easy setup • can be purged with instrument air providing lower cost of ownership • lower level of maintenance than traditional opacity systems • mg/m³ output, once calibrated

MCERTS QAL1 approved, stand alone or multisensor particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes. • ProScatter™ backscatter sensor technology with superior minimum detection <1mg/m³ • certified to 15 mg/m³ for processes with low typical emissions limits • manual and remote zero and span checks available to ensure optimal instrument performance and to comply with EN 13284/QAL1 • automatic functionality check • purge flow fail sensor option with inbuilt automatic optical shield activation • flue gas blocker option to protect plant engineers from harmful flue gases during maintenance

TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including baghouses and electrostatic precipitators. • simple installation, setup and maintenance • resistant to contamination • lower level of maintenance than traditional opacity systems • can be purged with instrument air providing lower cost of ownership • compliance measurement after electrostatic precipitators and baghouses • advanced sensor design includes automatic drift checks • mg/m³ output, once calibrated

TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including baghouses and cartridge filters. • robust design unaffected by product buildup on the sensor rod • no additional services such as air purge required, providing lower cost of ownership • simple maintenance • drift checks and contamination checks

QAL1 approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes.

The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial applications. Due to its wide dynamic range, the DM 170 may be used in combustion applications as well as in higher dust loading applications (such as power, cement and metals smelting, and in processes without filtration). Its simplicity and wide operating range makes it also ideally suited for process optimisation applications. • ProScatter™ backscatter sensor technology • Manual and remote Zero and Span checks available to ensure optimal instrument performance • purge flow fail sensor and optical shield options • nonintrusive system designed to operate in noncondensing stack environments • Singleside stack installation reduces contamination risk

Multisensor dust monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zones. Advanced probe electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Certified multisensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zones and in dry processes with elevated pressures. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all circumstances.

Multisensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable monitoring of leaking an broken bags in dust collectors • sensor configured remotely via controller • large graphic and numeric display • reduces filter maintenance intervals, process downtimes and filter costs

Standalone TÜV approved filter dust monitor suited to the measurement of filter emissions after bag houses, cartridge filters, cyclones etc. • reliable measurement of leaking and broken bags in dust collectors • external display and keyboard • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Standalone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0100%) after bag houses, cartridge filters, cyclones, etc. • reliable monitoring of leaking and broken bags in dust collectors • external display • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

Standalone filter dust leak monitor (0100%) for filter emissions monitoring after baghouses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks probe check option for improved data integrity reduces filter maintenance intervals, process downtimes and filter costs

The LEAK LOCATE 662 is a digitally networked, multicompartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. • reliable monitoring of leaking and broken bags in dust collectors • sensor configuration remotely via controller • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

The MIR 9000 P measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the nondispersive infrared method (NDIRGFC) with gas filter correlation. O2 is measured by a builtin SRM paramagnetic sensor. • operational at any time due to standby mode • remote access to full operation • quick installation • onsite preparation of report elements • time saving all along emission testing process

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. The optoNCDT ILR2250 laser distance sensor is used in transportation, logistics and conveyance technologies as well as automation and the metals industry. This is where the sensor enables reliable measurement results even when it is, e.g., installed at a safe distance from heat emitting measuring objects. In addition, difficult-to-access places via mirrors or through glass sheets can be detected.

The measuring wire ist fastened to the headstock or a special holding device, fed at the end of the base over a pulley and stretched tight with a weight (layout according to DIN 8606). The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions. When the wire is aligned to the bearing, the value display is set to zero. The straightness deviation can now be read directly on the display for each position when both parts of the image are fitted together by moving the microscope horizontally with the integrated micrometer spindle.

Low load hardness tester from 1 g to 2 kg Vickers or Knoop diamond indentor manual, semi- or fully-automatic

SE0S 02 is the best solution for the customers, who need quick analysis, high specifications, safety and fair accuracy of element composition identification results in metal production at minimal purchase, commission and operating of the device costs. Applications: - Industrial analytical laboratories of metallurgical and machine-building factories; - Express analysis of alloys while melting at workshops; - Identification of alloy grade at warehouses; - Research institutes and universities. SEOS 02 identifies the composition of iron alloys (all types of steel and cast iron) and nonferrous alloys on any basis (Al, Cu, Zn, Ni, Ti, Mg, Co, Pb, etc.). CCD allows to analyze the whole range of basic elements used in metallurgy, including S, P, C. SEOS 02 measurement accuracy is in accordance with international regulatory documents. Every SEOS 02 spectrometer passes the state verification procedure as a measuring instrument.

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT

The APLUS is a powerful platform for measuring, monitoring and analyzing power systems. The focus is on highest Swiss quality and maximum customer benefit. This universal measurement device is available in three major versions: With TFT or LED display or in top hat-rail version without display. It can be easily integrated into the process environment on site. It provides a wide functionality, which may be further extended by means of optional components. The connection of the process environment may be performed by means of the communication interface, via digital I/Os or via analog outputs.

METRO highlights: - High accuracy - High repeatability - Various gauging force variants - Long measuring ranges of up to 100 mm High accuracy - System accuracy of ±0.2 µm High repeatability - Repeatability is typically < 0.03 µm for a measuring range of 12 mm ZERODUR scale - Scale expansion is close to 0 ppm/K at between 0 °C and 50 °C Actuation by cable-type lifter - Defined velocity of the plunger - No counting errors - Precision mechanics - Ball-bearing guide with low friction - High-precision measuring loop Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

ACANTO Highlights: - Absolute measuring method - Protection up to IP67 - Online diagnostics - Serial data transmission with CRC Absolute measuring method - Position value is available immediately after switch-on - No counting errors - No reference runs necessary, because the measured value is always available Compact design - Station width of 15 mm EnDat 2.2 interface - Additional data on the status of the length gauge is available (diagnostics, warnings, alarms) - Serial data transmission with CRC Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.

CERTO Highlights: - High degree of protection - Compact design - Ball-bearing guide High degree of protection - Protection up to IP67 Compact design - Station width of 13 mm Ball-bearing guide - Ball-bearing guide with low friction - High-precision measuring loop - Rugged design Length gauges from HEIDENHAIN provide high accuracy over the entire measuring range, are mechanically robust, and can be used in a great variety of applications. They can be deployed in a wide range of applications: They are well-suited for production metrology, multipoint inspection stations, measuring equipment monitoring, and for use as position measuring devices.