Electronic generator - Import export

Materials: aluminium - Acetal resin gears Max. pressure: 30 bars Orifices: 1" F

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar (K400-I and K604-I), 20 bar (K700-I) Orifices: 1/2'' F (K400-I), 1"1/2 F (K604-I), 2" F (K700-I)

Materials: aluminium - polypropylene Max. pressure: 20 bar Orifices: 1" M-F

Materials: aluminium - Acetal resin gears Max. pressure: 30 bars Orifices: 1/4'' F

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar Orifices: 3/4'' F

Other information Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius UL94-V2 classification Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius Other information E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Shortening and lengthening of the E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E-Chain® Applications Overview E-Chain® in one band Cost-effective solution for large numbers E1: E-Chain® in one band Length of each chain band: 255 mm Can be shortened or lengthened as required through injection-molded, modular chain band Easy snap-open Mounting link for connection of several chain bands Fastening potential by the bore on the chain band Several potential materials Typical industrial sectors and applications General construction machinery Automotive sector Office technology Machine construction Electronic equipment General construction machinery etc. UL94-V2 classification

FC LINE HOOD PACKAGING MACHINE The FC LINE has a fresh design and solid structure, an electronic of new generation, and several other technical improvements which improve even more the performances of these machines. Three models are available with a support plan of mm. 400x250x200h - mm. 520x390x250h - mm. 580x780x250h. The dimensions of the support surface are to be considered with the closed hood. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product.

New packaging machine with transparent bell RP series with solid steel structure, the latest generation of electronic, front control interface, intuitive programming, more space in the packaging space and a whole host of technical features that enhance performance yet. Three models are available with a support surface of mm. 400x250x200h - mm. 520x390x250h - mm. 580x780x250h. The dimensions of the support surface are to be considered with the hood closed. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product.

Digital and semiautomatic bench sealer, with electric pedal and sealing bars at constant temperature, for closing polypropylene bags and laminated / laminated aluminum, paper, barrier materials, etc. The "hot bar" type sealing bars are equipped with resistance and electronic thermoregulator. Thanks to the new latest generation electronic control card, all controls, adjustments and alarms are more easily set. The digital control of temperature, time and pause interval, it is more precise and functional, thanks to the new control panel, and to the large 1-line by 16-character alphanumeric LCD display. Temperature adjustment 0-150 ° C, with alarm of ± 5 ° C with respect to the set temperature. The closing of the bars takes place by means of an oversized electromagnet which guarantees a high sealing pressure and allows the sealing of high thickness envelopes with or without side gussets. For a higher production it is sufficient to select the automatic cycle with timed closing.

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data.

The CheckStar Multi is the latest generation of Crane Electronics market leading CheckStar in line rotary torque transducer. It raises the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. If angle is specified, the CheckStar Multi rotary torque transducer will include an angle encoder giving 0.125° resolution (720 PPR). It also incorporates a light ring, giving the user visual feedback of the status of a tightening, when used with a Crane readout or data collector. The CheckStar Multi fits in line between the assembly tool and the fastener, measuring the actual torques applied and angular rotation of the fastener, under production conditions. Whatever the vibration and shock loads experienced, CheckStar Multi’s patented contact system ensures a connection is always maintained between the readout and the strain gauges. [...]

IMS (Insulated metal substrate) technology allows the mounting of power components directly on a highly thermally conductive printed circuit board . The result is a compact and reliable solution which, thanks also to the reduced cost compared to systems with traditional heat sinks, is finding more and more application in sectors where effective dissipation of the heat generated by electronic components is required, such as of Lighting, Automotive and Power Supply . The devices can operate at lower temperatures with a guarantee of greater reliability and lifespan , avoiding the assembly phases of mechanical heat sinks. The assembly cycle is simplified and can in some cases be reduced to just the SMT assembly operation. The availability of dielectric layers of different nature and thickness offers many design possibilities from a thermal and electrical insulation point of view. It is possible to use different materials with both aluminum and

Axon' offers an extended range of equipment wires and cables for any applications requiring resistance to high temperatures. Different types of constructions can be proposed and delivered ex stock. They are designed to resist high temperatures ranging from -90°C to +260°C depending on the insulation material ; PTFE, ETFE, FEP or polyimide. They are made with silver plated or nickel plated conductor copper alloy, tin, silver or nickel plated copper. They can be used for various applications: aeronautics, automotive, space telecommunications, electronics, military equipment, general industry, ...

The linear magnetic measuring system TM+MP200 consists of the magnetic transducer TM and the magnetic band MP200. The transducer works contactless, releaving the polarized fields of the magnetic band and converting the measure into digital signals. The system can be profitably employed in severe industrial environments, in presence of water, oil or grease. The mounting method is easy and cheap and the measure is accurate and repeatable. The scanning head TM is contained in a compact and strong metal case, and it is available with reading resolution 0.1 mm (TM10) or 0.01 mm (TM100). An electronic zero pulse is generated each 4 mm (type TM10C/TM100C), or matching with one or more external magnets (TM10E/TM100E).

The small steam boilers of the Junior 80 - 400 TC series are completely equipped, ready-to-operate, electronically controlled rapid steam generators with all safety devices for burner technology, pressure and temperature. With a height of only 1.5 m and 0.7 m width the Junior 80 TC steam boiler can be erected even in small spaces. Combustion: Oil or gas Steam output optionally 80 - 120 kg/h 150 - 200 kg/h 250 - 400 kg/h

Leves complement ideally to flow measurements, since each flow is coming from a container or is pumped into a tank or container. For this the level information is extremely important because through these pumps and valves can be controlled, so that the flow can be measured with high reliability. In case of emptying tanks, the pump power can be reduced, so that the risk of air in the pipes is reduced. This in turn would affect the measurement. During tank filling can by throttling the power of the pump a overfilling be avoided so that the full capacity of a tank can be exploited. The level measurement in combination with the flow measurement complement each other ideally, if the measured information are processed together and evaluated. The plant availability is held high, because in case of failure or maintenance of a measurement, the other still works. Energy optimized, high-frequency electromagnetic impulses, generated by the electronics, are propagated along the probe (single rod..

NTEGRA is a multifunctional device for performing the most typical tasks in the field of Scanning Probe Microscopy. The device is capable of performing more than 40 measuring methods, what allows analyzing physical and chemical properties of the surface with high precision and resolution. It is possible to carry out experiments in air, as well as in liquids and in controlled environment. The new generation electronics provides operations in highfrequency (up to 5MHz) modes. This feature appears to be principal for the work with highfrequency AFM modes and using highfrequency cantilevers.* There are several scanning types implemented in NTEGRA scanning by the sample, scanning by the probe and dualscanning. On account of that, the system is ideal for investigating small samples with ultrahigh resolution (atomicmolecular level) as well as for big samples and scanning range up to 100x100x10 µm.

In power electronics in general, and especially in low inductance buffer circuits with higher voltages as well as in discharge circuits, the call for capacitors with low inductance tends to pose problems: traditional high voltage capacitors are filled with oil, and the generous bushings required for clearance and creepage as well as internal safety mechanisms add substantially to the self-inductance of the capacitor. Based on decades of proprietary experience in metallizing capacitor films, ELECTRONICON has created a range of high voltage capacitors in self-healing technology, using the opportunities of special metallizing patterns. Despite the high voltage rating, our E51 range is manufactured in dry technology and without expensive bushings. Inside the can made of self-extinguishing plastic, the capacitor element is enclosed in solid resin (PUR). Connection is made through robust flat terminals with internal thread.

The XLP 50x Label Printer series is the perfect print solution for medium label volume applications, available in 4 and 6 inch print width. lt can be used with thermal transfer or thermal direct technology and prints high quality barcodes, fonts, and graphics on a large variety of label materials: (coated) papers, PE/PP or cardboard. Due to its flexibility the XLP 50x is ready for numerous applications and will support your identification and traceability processes, mainly related to primary and secondary packaging in the following industries: • Food manufacturing & processing • General distribution and logistics • Consumer goods • General manufacturing • Pharmaceuticals • Electronics • Ticketing Your benefits: • lncreased Productivity • Reduced Downtimes • High Print Quality • Convenient Maintenance • Ultimate Use Friendliness

The HE910-D is our most compact multi-band HSPA+ LGA module series, with built-in GPS and GSM/EGPRS fallback at 28x28mm. As a member of the xE910 LGA unified form factor family the HE910 series is pin-to-pin compatible with LTE, HSPA, GSM/GPRS and CDMA/EVDO xE910 family counterparts. Featuring seven-band HSPA+ data rates of up to 21 Mbps (Cat 14) downlink and 5.7 Mbps (Cat 6) uplink, ideal for high performance global roaming. The HE910 series is well-suited for a wide range of industrial and consumer applications with high data throughput requirements, including, asset & fleet tracking, in-car telematics, PDAs, security surveillance, personal navigation devices, e-readers and consumer electronics in general. Several variants are offered, ranging from low cost tri-band models with reduced throughput, to fully-loaded configurations including receiver diversity and high sensitivity A-GPS functionality. Key Benefits Seven-band HSPA+ for worldwide coverage Design once and deploy...

POM is a semicrystalline thermoplastic and is characterized by a low coefficient of friction and good wear properties, unaffected by wet environments. POM offers good resistance to a wide range of chemicals including many solvents. Acetal provides high strength and stiffness coupled with easy machineability. POM-C - Delrin is also noted for its high mechanical strength, heat resistance and good antifriction properties. For parts which need to be dimensionally stable even exposed to humidity or wet environments, copolymeric Acetal offers better hot water, thermal and chemical resistance than homopolymeric Acetal. Applications: Food processing, agriculture, medical, electric, electronic, automotive, general machine building, transport and logistics, bottle and carwashing equipment, sports equipment, office machinery, textile. Available in colours: white: black: blu

Excellent Arm Protection: These disposable sleeve covers can be worn over clothing as an extra layer of protection that can protect your forearm against dirt, spills, dirt, dust pollutants and particle barrier and offer great comfort after hours of use. Premium Material: The protective sleeves are made of soft and durable plastic that is lightweight and comfortable to wear. It is for single use only. Double Ended Elastic Design: There are two ribbon loops on the ends to prevent water from getting wet on your arms and to hold the cap in place. One size fits all and ensures an easy and secure fit. Wide Range of Applications: These waterproof sleeves can effectively stop spills, splashes and dirt from daily work to prevent your arms from getting hurt. Suitable for general cleaning, electronics, construction, manufacturing, food preparation, dish washing, painting, gardening, beauty salons, tattoo shops and other places you need. Package 100 pieces x 10 One tire is used.

The A-Lift® is our flagship electrical skincare treatment delivering world-class nano-current and micro-current facial enhancement therapy and a revolution in non-invasive pain-free age-reversal technology. Short or long term (with results visible for up to 8 months with a course of treatments), subtle or thorough, the revolutionary A-Lift® electrical skincare treatments can do it all! Why not offer this new, unique, VIP, next generation electronic non-surgical facelift in your salon today? Imagine having all the benefits of having a facelift, but with no surgery, no needles, no Botox, no fillers, no chemicals and absolutely no pain. That is the kind of VIP electrical skincare treatment the A-Lift® delivers, and you can start to see its effects in just 45 minutes (with results visible for up to 8 months with a course of treatments). It is incredibly powerful, yet unbelievably gentle; perfect for a range of applications, from improving the appearance of wrinkles and firming muscle.

Design and development of Custom Static Content Websites, Content Management Systems (CMS), Electronic Commerce Websites, Dynamically Generated Content Websites, Interactive and Communication Websites, Industry and Sector Specific Website Design