Electrolytic galvanizing - Import export

State-of-the-art technology and extensive knowledge in the processing of steel characterise our location in Bad Salzungen, Germany. For us, performance means a wide range of cold-rolled steels of the highest quality at competitive prices, flexibility and a high degree of readiness to deliver while adhering precisely to the specified chemical and mechanical values. Surface finishing by electrolytic galvanizing and/or subsequent customisation of your goods are possible for us. We offer all our customers spooled materials with volumes of over 200,000 metres of metal strip per spool. This further development means a considerable advantage for our customers. Personnel-intensive set-up times and machine downtimes are avoided.

Cold rolled strip is used in a variety of applications. It meets high demands on forming behaviour, dimensional tolerances and surface finish, which offers our customers decisive advantages! HFP cold rolled strip is ideally suited for all stamping, bending, drawing and deep drawing purposes. From ball bearing housings to roll cutting and punching strips, hose clamps, headlight reflectors, electrical equipment, office supplies and tubes to safety parts of all kinds, a wide variety of components can be manufactured for various industries. DC 01, DC 03, DC 04 according to DIN EN 10139 / mild steel - St 37/ special grades on request Depending on the customer's requirements, we supply treatment states from LG to C690.

In addition to the product range of classic cold rolling mills, we can also offer our customers electrolytically galvanized strip. The zinc coating offers excellent corrosion protection: In cooperation with our customers, we have developed a product that solves the problem of zinc abrasion in the processing of galvanized strips - ZPL (Zinc Plus Paint). An organic coating system is applied immediately after electrolytic galvanizing. This results in a colourless, uniform, highly lubricious layer with a dry film thickness of 0.50 - 3.00 µm, which can of course also be supplied in any desired colour. ZPL offers the following advantages: Further improvement of corrosion protection Excellent sliding properties, preventing zinc abrasion in the tool Reduced tool wear Longer tool life Oil-free processing is made possible Coating and printable layer with "Anti Finger Print" properties

In order to increase the corrosion resistance of the steel sheet, galvanizing or electrolytic coating is applied to the surface. The coating is generally applied in 100-300g/square meter on both surfaces. Chromate solution or oil applied to the surface of the coated material is applied to protect it against white rust.

Volume: 100 L Dimensions: 760 x 450 x 545 mm Weight: 7 KG ( +/-5%) Body and cover with warranty certificate, produced by injection system using high-density polyethylene(HDPE). Temperature resistant: -30"C to +8O°C The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. - There is foot pedal mechanism.

Volume: 100 L Dimensions: 760 x 450 x 545 mm Weight: 7 KG ( +/-5%) Body and cover with warranty certificate, produced by injection system using high-density polyethylene(HDPE). Temperature resistant: -30"C to +8O°C The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft.

Volume: 360 L -Dimensions: 596x880x1099 mm -Weight: 15,40 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high-density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: 30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Max ıoading weight 144 KG (±5%) -Max total weight 160 KG (±5%

Volume: 240 L -Dimensions: 605 x 745 x 1060 mm -Weight: 12,50 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs arms are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: 30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products.

Volume: 120 L -Dimensions: 925 x 465 x 580 mm -Loading Capacity: 60 Kg -Weight: 7,5 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: -30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products

Volume: 120 L -Dimensions: 925 x 465 x 580 mm -Loading Capacity: 60 Kg -Weight: 7,5 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: -30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the product

Volume: 240 L -Dimensions: 605 x 745 x 1060 mm -Weight: 13 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs arms are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: 30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products. - There is foot pedal mechanism.

Anodizing, galvanizing, passivation, painting: Mifa offers customers all possible surface treatments. A good surface treatment can protect against corrosion, reduces wear or friction, can be electrically insulating or conductive, and in many cases makes the product visually more attractive. Mifa sees surface treatment as the nishing touch that not only increases durability but also adds extra functionality to the aluminium product. The main surface treatments for aluminium that Mifa offers can be roughly divided into three categories: - Conversion layers: aluminium passivation, anodizing, and plasma electrolytic oxidation - Galvanic coatings: chemical nickel-plating, silver, gold, tin, hard chromium etc. - Organic coatings, painting, paint primers, adhesive primers CVD (Chemical Vapour Deposition), PVD (Physical Vapour Deposition), and synergistic coatings can also be applied on request.

Hydrochloric acid 31% is a colorless transparent liquid Also known as muriatic acid or spirits of salt It is an aqueous solution of hydrogen chloride with the chemical formula HCl(aq) Physical specifications: HCl is a strong and highly corrosive acid Yellowish liquid with a distinctive pungent odor, soluble in water and dissolves in alcohols but insoluble in hydrocarbons. Stability and reactions: Stable and incompatible with metals, organic materials, alkalis, explosives, epoxies Properties and applications Boiling point / range 50°C Relative density >1123 kg/m3 @20°C food & pharmaceuticals industry chloroalkalies production processes water treatment processes for drinking water and industrial water production of industrial& household chemicals mining industry production of biofuels, oils and lubricants, galvanising and zinc plating textile industry and tanning CAS number 7647-01-0 WE number 231-595-7 Molar mass 36,45 g/mol Customs tariff code 28061000 ADR UN1789

Manual All controls are made by the operator via the control button. Each crane is controlled by an operator. Semiautomatic H Busbars are an automatic transport system from the unloading area to the loading area. The system is suitable for automatic operation. Transitions between stations are made by operator control. Waiting and immersion times are automatic in the boilers. Automatic operation when necessary, but in case of failure, intervention with external operators, transitions between boilers are made by the operator. Fully Automatic The whole process is controlled from the skada screen. There is no need for an operator at the beginning of the cranes. All boiler chemical controls are made automatically from the skada screen. Transitions between stations are made automatically to unloading stations. It has the possibility of easy maintenance and intervention with remote access. Lifting drive is with chain gear system and it is supported by rollers on the guide rail

Features Self-cleaning nozzle header. Inner brushes for nozzle cleaning are built-in. By rotating inner brushes, nozzle orifices are cleaned thoroughly, and foreign objects inside the pipe are flushed out through the drain. Available in the manual brush-cleaning type (the inner brushes are rotated by turning handwheel) and air-driven automatic type (which allows remote control of spray and cleaning modes). *1) Spray capacity per one nozzle (not per header). Applications [Steelmaking] In Continuous Galvanizing Line (CGL), Electrolytic Galvanizing Line (EGL), Continuous Pickling Line (CPL), and Continuous Annealing Line (CAL)

Electrolytically galvanized Sheet

Electrolytically galvanized Slit Coils