Electrical material - Import export

Electrical tapes are used to insulate electrical wires and other materials that conduct electricity. The tape can be used in white goods applications. It is used for coil, capacitor and cable installations. The tape is resistant to UV light, inhibits corrosion of electrical conductors.

Solutions for plates Application examples - Automotive The new solution for all applications in stamped sheet metal retainers: iglidur® Clip On's are frequently used in seat and convertible top systems and multi-joint hinges. iglidur® clip-on bearings facilitate captive assembly even in punched sheetmetal / steering arms with limited fine blanking content. Compensation of axial clearance Loss secure pre-assembly possible Electrically conductive materials are optionally available Pressure-resistant materials until 80 MPa The Clip On bearings can also be produced from electrically conducting iglidur® RN89, thus permitting e-coating.

One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive legislation, this represents enormous growth potential for recycling companies in all consumer-oriented markets. For many years now, ERDWICH has specialised in the reclamation of valuable primary materials from electronic waste with its shredding machinery and turnkey plant solutions. As a result, economical and mature solutions are available for meeting any of these challenges. ERDWICH pre-processing: Whether you’re handling electrical/electronic waste, small/large household appliances,...

Basic material for electrical parts.

Basic material for electrical parts.

Basic material for electrical parts.

Basic material for electrical parts.

Basic material for electrical parts.

Basic material for electrical parts.

socket 3-pole 12V material: plastics Category Electrical equippment for vehicles / 12 Volt / Sockets / 3-pole / 2-hole flange Product number supplier 777542

socket 3-pole 12V material: plastics Category Electrical equippment for vehicles / 12 Volt / Sockets / 3-pole / 2-hole flange Product number supplier 777542

socket 3-pole 12V material: plastics Category Electrical equippment for vehicles / 12 Volt / Sockets / 3-pole / 4-hole flange Product number supplier 777541

socket 3-pole 12V material: plastics Category Electrical equippment for vehicles / 12 Volt / Sockets / 3-pole / 4-hole flange Product number supplier 777541

NSPV PVC Junction Box 3Way Entries Features: AS/NZS 2053.2:2001 standard; This conduits and fittings used to protect cables in electrical installations. Mechanical properties, electrical characteristics and material requirements are covered.

Basic material for electrical components, installation parts in the electrical industry. Zinc content proportionally reduces metall costs.

Basic material for electrical components, installation parts in the electrical industry. Zinc content proportionally reduces metall costs.

Basic material for electrical components, installation parts in the electrical industry. Zinc content proportionally reduces metall costs.

Basic material for electrical components, installation parts in the electrical industry. Zinc content proportionally reduces metall costs.

Basic material for electrical components, installation parts in the electrical industry. Zinc content proportionally reduces metall costs.

Basic material for electrical components, installation parts in the electrical industry. Zinc content proportionally reduces metall costs.

FlowJam T is a sensor for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically nonconductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. • mounted around the tube • triboelectric measurement • free crosssection • easy retrofitting

PEEK materials offer outstanding performance in extreme conditions, making these materials some of the best performing thermoplastics in the world. They offer strength, stiffness, long-term fatigue, and other properties that set them apart from other materials. Extraordinary temperature-, chemical-, and electrical temperature-resistance help PEEK materials endure in harsh conditions. Additionally, they have excellent high-temperature performance, with glass transition temperatures ranging between 289°F – 324°F and melting temperatures between 649°F – 729°F. PEEK materials also offer very good resistance to chemicals like dilute acid, dilute alkalis, oils and greases, aliphatic hydrocarbons, aromatic hydrocarbons, and halogenated hydrocarbons

Protect your sensitive electronic goods during storage and transport with ESD pallets. The closed ESD pallets with a smooth deck not only offer protection against charges, but are also particularly easy to clean. Made from electrically conductive material, our ESD pallets ensure safe handling of your products. Thanks to their high load-bearing capacity and optional tubular steel reinforcement, they are also suitable for use in high-bay warehouses. Choose between versions with and without a safety edge, depending on your requirements. The pallets are available in two sizes: 120 x 80 cm (as "ESD Euro pallet") and 120 x 100 cm (as "ESD industrial pallet"). Translated with DeepL.com (free version)

Material: CuZn33 Properties: electrical and thermal conductivity We produce our STAX brass fibers MS67 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and fine 60 μm. STAX brass fibers MS67 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for our STAX brass fibers MS67 are basically for friction material as for brake pads and clutches. If you are looking for brass fibers for your specific application, please do not hesitate to contact us.

High-quality blown film forms the basis for Dürrbeck’s tailor-made packaging solutions. Depending on the size, weight and volume of the goods to be packaged, the bottom seal bag and the flat bag are among the most popular types of packaging. Universal plastic bags for various purposes, they are ideal for storing and protecting pharmaceuticals, food, small electrical parts or building materials and textiles against dust, dirt or the elements. Our bottom seal bags are made for smaller-sized contents, flat bags for bulky and heavy items (from 400 x 600 mm). Bottom seal bags and flat plastic bags are easily manufactured plastic bags made of polyethylene (LDPE, HDPE, MDPE) – without side gussets, closures or the like. This type of packaging offers excellent protection and is an attractive, effective way to present your products.

Aluminium nitride (AlN) is one of the best materials to use if high thermal conductivity is required. When combined with its excellent electrical insulation properties, aluminium nitride is an ideal heat sink material for many electrical and electronic applications.

Product information "Stand-up pouches, clear transparent / shiny aluminium" Stand-up pouches front clear transparent / back silver aluminum with snap closure Show what you have. This bag is transparent on one side. This allows your customer to view the content as if through a shop window. Resealable stand-up pouches. Stand-up pouches guarantee optimal use in the food and non-food sectors. Our stand-up pouches are particularly suitable for filling flavored materials, tea, rice, electrical appliances, ground products such as salt, spices, decorative sand, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. Stand-up pouches provide protection from air, moisture and UV rays. Printing: We print your stand-up pouches with your company logo or advertising slogan in up to 12 colours.

CSN ® Explosion proof cartridge heaters as direct heaters for liquids or gases in hazardous environment. These units are equipped with a heating bundle or a replaceable ceramic heating element. For temperature control these heaters are available with an integrated temperature monitoring system. These devices are available in various material grades. The electric cartridge heating element type 93./..EEx….T.(.) is designed for the heating of liquids in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 2014/68/EU) Art. 4, Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL Further information about our CSN® ExCartridge Heater