Electric motor shafts - Import export

Custom CNC Machined Shafts Check out our Custom CNC machined Shafts as below table: FRIMA(ISO 9001& IATF16949 Certified), provides precision custom machined parts in a wide range of materials to your specifications. We provide inventory management with release schedules, including in time  delivery and blanket orders that are available for our clients' convenience. We are able to save our clients' money with the capability to stock our clients’ parts in our 8,000 sq. foot warehouse until they are needed. We work with a wide variety of materials, specializing in precision CNC machined parts from 1" to 6" in length and .032" to 4" inches in diameter, while holding tolerances to specification. Which is the Best Material for Custom CNC Machined Shafts ? Aluminum Brass (including using 360 brass half-hard) Beryllium Copper Bronze High Temperature Alloys Most Grades of Steel Nickel Nitronic 60 Stainless Steel Titanium Please visit at https://www.frimaparts.

ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These economical pumps need no lubrication and no daytoday maintenance. A unique design allows parts to adjust automatically for wear. Highest efficiency is maintained for a very long time. Installation is simple as no chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed lowcost electric motors. By simply changing the shaft rotation, pumps can be used to pump in or out through the same piping.

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

China CNC Turned Parts Manufacturer custom produce all kinds of turned parts according to customer's drawing or samples, we can produces stainless steel Turned parts,carbon steel Turned parts, aluminum turned parts,brass & copper turned parts. Specialize in producing stainless steel motor shaft eccentric shaft knurled shaft precision parts China If you are interest in our CNC machining services, please feel free to send inquiry to us, and then our professional sales manager will get back to you ASAP! sales@mxmparts.com WhatsApp +86 13780014913

The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

Magnetic couplings are used as transmission mechanisms in modern pumps, which makes it possible to obtain a qualitatively new 100% tight device without making essential changes to the design of the electric drive and the wet end of the pump. At present Villina offers GNVC, GNGC and GNVC-P series vertical, horizontal and semi-submersible centrifugal pumps with magnetic couplings, designed for pumping explosive and flammable, toxic and corrosive fluids (petroleum products, alkalis, acids, alcohols, etc). PURPOSE Magnetic couplings for Villina centrifugal pumps allow for transmission of torque from the electric motor to the pump shaft using magnetic fields generated by permanent magnets instead of mechanical engagement devices. At the same time, there is no need to withdraw the shaft from the pump wet end to the drive device, therefore the wet end can be made in the form of a completely sealed system free of leaks which are typical for pumps with mechanical shaft seals.

Eisele rotary lobe pumps have been constructed since 1983 and have proved themselves in the agricultural and industrial sectors. Detailed key data here: Rotary lube pump (rotary piston pump) for pumping media up to approx. 30% TS Rotary lobe with metal core and perbunan coating Drive with PTO shaft or electric motor (7.5 / 11.0 / 15.0 / 18.5 / 22.0 kW) Pumping capacity from min. 450 l/min. to 6,000 l/min (depending on the media) Pressure performance 4 - 10 bar The rotary lobes can be changed quicker and easier by opening the four ring nuts of the cover, easy as one-man operation. Vacuum and pressure side can be freely selected by re-plugging the drive shaft Standard with front side-wear plates in the pump housing and cover Mobile pump stations with one or two rotary lube pumps (pumping capacity up to 7,400 l/min.) Eisele rotary lube pumps have proved themselves in the agricultural and industrial sectors. A continuous further development guarantees a high technical standard....

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.

"We offer unbalanced vibration motors. The vibrators can be installed in any position to maximize the centrifugal force. Features: - On request in 220-240/380-415 volts - 50 Hz and 220-240/440-480 volts - 50 Hz. - Static moments expressed for a single vibrator. - Type of protection IP 66/7 - Insulation class: F (155°C). - Tropicalized motor as standard. - Operating temperature : -30°C to +40°C. - Reference standard: CEI EN 60034."

"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."

"We offer stainless steel motors to provide solutions for our customers in industries sensitive to moisture and bacteria. The design is smooth and round to minimize dirt build-up. Features: - IP66 protection - 0.25kW to 7.5kW - Available in 1500 or 1000t/min - IE3 efficiency - Foot or flange mounted - Other options are available"

Dutch Scrap Recycling B.V. Is the leading trader in Iron, Aluminium, copper, plastic, rubber , Paper, copper cathode scraps in the Netherlands and Continues to Be a Family Business With Four Generations Working to Innovate the Recycling Industry.

We are doing our best to provide the best quality products through unremitting efforts and continuous investments Since we established in 1988, SAMHYUN has been Developing & Manufacturing electric Motors and Controllers for Automotive, Defense, Robot, Marine and Aerospace with our own design and the best price, the best quality based on the spirit of creativity, challenge and innovation. We are committed to continuous innovation management for the customers satisfaction and we are doing our best to provide the best products under slogan "Global Top TQS&Zero Defects". We will pave the way for great company in the world with new technology and best quality from customer's standpoint.

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

Watercooled electric motors can be realised in any possible mechanical and electrical customised version. They can be realised in vacuum tight version for fan drive on thermal treating oven.

Electric motors are available in nearly any mechanical and electrical customised version

Usually,universal motor Applications like following: Soybean Milk Machine,Food Machine,Meat Grinder,Electric tools High torque,special coils,low cost design Power tool motor are often design by Universal motor.Recently,more and more customer choose our BLDC motor for replacement.

This type motor are used for motorised window,motorised curtain and more.12V,8000 rpm speed,0.018NM torque,78mm length motor housing,shaft could be designed for your special application.

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 18v 18v rated speed 18000 22300 RPM rated torque 88.82 118.43 mNm output 167.35 236.17 W EFF 80 75 %

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 18v 24v rated speed 3400 5200 RPM rated torque 61.47 78.63 mNm output 21.97 42.92 W EFF 82 76 %

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. Three-Phase BLDC (Brushless Direct Current Motor) comes in smaller size with advantages of energy-saving, and high efficiency. •High-voltage driving to reduce transfer loses •Sensor-less phase detected •Low phase switching noise •Sine-wave control. •Support both of linear and digital (PWM) control signal •High efficiency for power saving. voltage 12v 12v 12v 24v rated speed 2250 10700 8800 5100 RPM rated torque 6.13 13.7 11.4 8.12 mNm output 1.4 15.46 4.37 10.63 W EFF 55 76 70 75 %

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 12v 24v 18v 36v rated speed 2400 7700 37000 17000 RPM rated torque 21.33 44.97 0.05 0.05 mNm output 5.4 36.69 197.78 96.26 W EFF 74 76 78 90 %