Dryers - Import export

Main features • Management of the process time and temperature through the heat exchanger • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes

In addition to filtration, compressed-air drying contributes significantly to an increase in process reliability. Humidity in compressed-air systems causes corrosion, and promotes the growth of micro-organisms. In individual cases, condensate emerges at the point of use - an ongoing danger for the operational flow, for example because of failing pneumatic controls, increased wear and tear or because of other disturbances in the production process. With considerably enhanced process reliability, the DRYPOINT dryer technology offers decisive advantages for every field of application. The BEKO TECHNOLOGIES portfolio comprises application-optimised refrigeration, adsorption and membrane dryers for volumes up to 1,500 m³/h. This range of dryers is completed by heat-regenerated EVERDRY adsorption dryers which are designed for large volume flows up to 20,000 m³/h.

Dew point +5ºC 1,000 liters Dew point +3ºC 850 liters Working pressure 7 bar Inlet air temperature 35ºC Ambient air temperature 25ºC Connection ¾” M Power supply (V/phase/Hz) 230/1/50 Pressure (bar) 16 bar Dimensions ( mm) 350 x 500 x 450 Weight (Kg) 20 kilos

This heat pump dryer is used for drying different materials, it adopts heat pump working heat dissipation principle to form airflow to dry industry and agriculture materials, this type of heat pump with the features of intelligent, low cost, temperature controllable and so on. Wide application, can be used in agricultural products, seafood, fruits and vegetables, fish, meat, nut, herb, wood drying systems. Intelligent temperature control, auto temperature adjustment, energy saving, high energy efficiency, easy installation, preferred material + mature process

Resettable thermal bimetal- Normally Closed- Connection lugs 6.35- The circuit opens at the indicated temperature- Reset once the temperature restoredUse in Appliances, washing machines,

Each of us has faced the problem of drying towels in the kitchen, especially during the cold season. If the towels do not get dry quickly, they get an unpleasant odor and become dirty very quickly. The solution to this problem is an infrared towel dryer

SPECIAL OFFER! Buy for 1400 UAH, get the universal rug 3-in-1 FOR FREE! The bamboo dryer can be used fo Drying shoes (infrared heat gently dries any footwear) Heating your feet As a warming mat for pets Drying of vegetables, fruits, etc. Raising dough, making yogurt

electrostatic paint

DRYING CONTROL UNIT DA 4 QUBEThe overdrive for your low-pressure insulation drying operation Smaller, lighter and considerable time saving along the way – based on the Qube+’s development objective we now also designed an apposite drying control unit. The particularly compact drying control unit is tailored perfectly to the Qube+ and can be connected to it in just a few steps. In doing so, an elaborate intermediate hose connection with water separator is no longer necessary, this simplifies the installation and saves both time and material. DA 4 Qube: Perfect for the Qube+ – and it can be combined well with all other insulation dryers from your stock due to the optional DA adapter plate.

WE CAN SUPPLY DYSON SUPERSONIC HAIR DRYER PLEASE DON'T HESITATE TO CONTACT US IN CASE OF ANY INTERESTED

Dew point +5ºC 750 liters Dew point +3ºC 600 liters Working pressure 7 bar Inlet air temperature 35ºC Ambient air temperature 25ºC Connection ¾” M Power supply (V/phase/Hz) 230/1/50 Pressure (bar) 16 bar Dimensions (mm) 350 x 500 x 450 Weight (Kg) 19 kilos

JVK Cosmetics LDA specializing in the distribution and wholesale of selective perfumes, cosmetics, and hair care. Established in the city of Sint-Niklaas, we have since then developed a broad international vision and built a professional team with many years of experience in the import, export, distribution and wholesale of perfumes and cosmetics

- Dyson AirwrapTM Complete multistyler (Copper/Nickel) - Dyson AirwrapTM Complete multistyler (Prussian blue/Buyer) - Dyson AirwrapTM Complete multistyler (Nickel/Copper) - Dyson AirwrapTM Complete Long multistyler (Nickel/Copper) - Dyson AirwrapTM Complete Long multistyler (Copper/Nickel) - Dyson AirwrapTM Complete Long Multistyler (Prussian Blue/Buyer) - Dyson AirwrapTM Complete Long Diffuse multistyler (Nickel/Copper)

"It is highly crucial to have clean and dry air in the system to have profitable and efficient manufacturing worldwide. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers remove water vapor from compressed air, stop corrosion, and inhibit the growth of micro-organisms in critical applications. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers supply high-quality dry air which has -40 °C dew point or optionally -70 °C dew point to the system with affordable prices and reliable way. In that way, the production machine has a longer life, minimum maintenance costs, and processed product is produced in a healthy and safe way. The new vacuum purge technology decreased air loss during the regeneration process and make the production more cost-efficient way."

"The light weight modular design desiccant dryer series brings a new concept in compressed air technology, offering total installation flexibility to meet specific needs. Mikropor’s Modular Desiccant Dryers are less than half the weight and size of a traditional twin tower design, allowing even the largest models to be easily moved through a standard doorway. Mikropor’s innovative Modular Air Dryers make it easier and more affordable than ever to deliver high-quality compressed air for virtually herever it’s needed. Mikropor Modular Desiccant Dryers have cosmetic beauty and can be located in clean, pleasant environments eyesore. Offered in sizes from 5 m³/h to 400 m³/h with dew point of -40°C to -70°C (optional) these dryers are equipped with everything you need, requiring only air inlet/outlet connections."

"This design achieves a hyper-efficient 100% contact between the air and refrigerant circuits, delivering state-of-the-art performance and great cooling efficiency. The state-of-the-art 3-in-1 design features very low differential pressure delivering significant energy savings. The 3-in-1 Heat-Exchanger is compact and allows the dryer to be smaller and reduces the space required for the dryer. Mikropor offers a variety of 3-in-1 dryers equipped with the 3-in-1 Heat-Exchanger to meet a full range of capacity and power requirements."

"What Mikropor offers you with MKE SERIES: - Low pressure drop saves compressor power - Quick start and reaction time provides additional production time - Every dryer is specially designed with the right components to consume the lowest energy - Highly energy efficient and environmentally friendly R134a refrigerant across all models. - R513a refrigerant is optional. - A state-of-the-art heat exchanger design provides the highest cost saving in the industry - Best in class refrigerant compressors consume less energy against competition dryers - Pressure switches control the condenser’s fan motor for saving energy and letting the system operate at desired conditions - This is not only a dryer, but an air treatment package that delivers an air quality of class 1.4.1 as per ISO 8573:2010 due to integrated filtration"

Cycling refrigerated dryer design helps you achieve optimal performance at a lower cost compared to a Digital Cycling design.To reduce energy consumption, the dryer refrigeration system automatically deactivates during periods of low load and features a patented heat exchanger and thermal mass circuit.MCY Series Air Dryers are highly reliable, efficient, have small space requirements and offer low cost ownership. Integration of pre / post filtration within the dryer cabinet saves labour time, installation cost and valued production space. The compact size also offers flexibility and economy during transportation.

A centrifugal blower and high efficiency heater eliminate the use of valuable compressed air for desiccant regeneration.The completely automatic drying system uses blower to pull ambient air and pass it through the heater. This hot air stream flows opposite to drying flow direction. Hot air above 200⁰C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating/regeneration accordingly thereby providing valuable energy savings.

The ventilation dryers of the GRANIVENT™ series are the ideal supplement to GRANIFRIGOR™ grain dryers. They are used to aerate the grain immediately after harvesting. Subsequent cooling with a GRANIFRIGOR™ ensures that the grain is not damaged by insects or fungi. Fields of application > Optimal grain protection against warm or humid air > Standard medium pressure version - also ideal for tower silos

The POWDRYER™ PD08 metal powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. It corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. It also reduces the number of air inclusions in finished workpieces. Significantly higher material densities are the result. Fields of application > Particularly for metal printing products where maximum strength is required > For the printing of alloys of aluminium, titanium, tool steel, etc. > Special tools for the metal-processing industry, machine and system engineering, prototype development, and more > Aviation, aerospace, and automotive industries, plus medical and dental technology

Original bldc motor factory.We could design and make customized motor fan for hand dryer equipment,medical care equipment,vacuum cleaner

Lödige shovel dryers are batch vacuum dryers. The mixing elements are frequency-controlled for ideal adaptation to the process. Special rotating mixing elements, installed in a cylindrical drum equipped with a temperature control jacket, create a three-dimensional product movement . The resulting contact frequency of the particles with the heat exchange surface leads to incredibly short drying times. The intelligent product movement ensures intense contact of individual product particles with the heated container wall while also providing very gentle product treatment. The chopper rotating at high speeds is used to disperse the product during transition between phases. Product surfaces are opened up during this process. This leads to a significant increase in drying capacity and prevents moisture and temperature gradients. Fine particles pulled along by solvent vapours are separated in the filter and returned to the product bed through pneumatic filter cleaning.

The Combined Fluidization Technology dryer (CFT dryer) offers an economic process for sticky products. CFT dryers combine the advantages of convective fluidized bed drying with contact drying. The CFT works with a hot mechanically fluidized bed. The feed material is distributed into this bed. It is fluidized by a rotating paddle system. Inside the fluidized bed the wet product is evenly distributed throughout the dry product. The volatiles evaporate instantly in contact with the hot particles, i.e. new solids are created at the location of evaporation. CFT dryers allow the handling of products, which cannot be handled in other types of contact dryers. Highly viscous, pasty, sticky, crust-forming states do not exist.

The granulation dryer is designed for continuous operation. A unique property of this dryer is its combination of convection and contact drying. Adaptation of the retention time to the specific process ensures that products are dried at low temperatures. At the same time, excellent granulation of the final product can be achieved. This intense mixing effect separates the particles in the fluid bed, thereby creating a large product surface and preventing the generation of temperature and moisture gradients in the product bed. This leads to a significant increase in the heat exchange via the heated drum walls. The product behaviour during drying is affected by the mixing tool geometry and choppers can be activated as an option; these can be used to control the average product retention time and the retention time distribution. It is therefore possible to achieve a defined grain size distribution during granulation processes

The laboratory vacuum shovel dryer DRUVATHERM® is a system provides reliable scale-up to production scales in the context of product and process development and can likewise be used for small batch production too. The Lödige laboratory vacuum shovel dryer DRUVATHERM® is a horizontal, batch vacuum dryer with a frequency-controlled mixing tool. This mixer consisting of mixing elements adapted to the process and arranged on a shaft according to a specific system - is installed in a cylindrical mixing drum equipped with a temperature control jacket. Rotation of the mixing unit generates a three-dimensional product movement, in which all of the product is constantly in motion. The contact frequency of particles with the heat exchange surface leads to shorter drying times. The chopper rotating at high speeds fitted to the side of the mixing drum is used to disperse the product . This leads to a significant increase in drying capacity and prevents moisture and temperature gradients.

SMS offers sludge drying systems with horizontal thin film dryers for treatment of sludge from municipal as well as from industrial waste water treatment plants. Variations of this sludge treatment process are: Pre-drying up to 35 to 50 % dry solid content before incineration in fluidized bed incinerators 65 to 75 % dry solid content before combined incineration with garbage, composting or landfill Full drying up to 85 to 95 % before thermal utilization as bio-fuel for cement kilns, coal fired power stations, pyrolysis, gasification or other conversion processes before composting and agricultural usage as fertilizer and for soil reclamation In all these drying processes the thin film dryer is the first choice.

The wet product fed through the inlet nozzle is picked up by the rotor blades, applied on the hot wall and simultaneously conveyed towards the outlet nozzle at the opposite end of the body. The generated vapours are streaming counter-currently to the product flow and are leaving the dryer close to the feed nozzle. Evaporating and conveying capacity are adapted by the right rotor blade arrangement. Entrained particles from the dry zone are removed in the wet zone. Moisture levels of less than 1 % can be achieved. The residence time of the product is typically between 5 and 15 minutes. The outstanding heat transfer rate for hot solid products enables cooling of large amounts of solids in a compact machine compared to usually used cooling screws and without cooling air.In product melting like the melting of urea, the particles are heated up and molten inside the dryer. The melt can be mixed with other liquid and solid additives to improve the properties of the final products.

The vertical thin film dryer consists of a cylindrical, vertically arranged body with heating jacket and a rotor inside. The rotor is equipped with rows of pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin product layer over the heated wall and mix the product layer material intensively. Therefore the volatile components evaporate continuously from the product layer with high evaporation rates. The hinged blades are designed with a minimum gap to prevent fouling of the heating surface by product, but are never in contact with the heated wall. The product enters the dryer at its top. The evaporation starts after heating to the boiling point. In the slurry zone first solids are formed and with advancing evaporation of the volatiles and continued shearing by the hinged blades the paste breaks up to powder. The final solid product is discharged by gravity at the bottom of the dryer via a suitable air lock.