Results for
IGUS® GMBH
Germany
Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.
Request for a quoteIGUS® GMBH
Germany
Guide trough for vertical applications, especially for storage and retrieval units of all kinds, now with even lighter components and simplified installation. Locking lever and guide rails prevent the energy chain from swaying or swinging outwards. - Significant savings in costs and weight when compared with a complete housing - Now for especially narrow aisles as well - This also means low transport costs - Fast, safe and easy assembly with clip-on guide rails - Reduced noise - Easy access for servicing - Energy, data and media are guided in one system safely and without interruption
Request for a quoteIGUS® GMBH
Germany
- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution
Request for a quoteTHOMSON MACHINERY BV
Netherlands
At Thomson Machinery BV, we specialize in sourcing and trading a wide range of equipment for various industries including building construction, marine construction, excavation, concrete/road work, surface & underground mining, land development, agriculture, trucking, and more.
Request for a quoteTHOMSON MACHINERY BV
Netherlands
At Thomson Machinery BV, we specialize in sourcing and trading a wide range of equipment for various industries including building construction, marine construction, excavation, concrete/road work, surface & underground mining, land development, agriculture, trucking, and more.
Request for a quoteTHOMSON MACHINERY BV
Netherlands
* Adopts fully automatic PLC computer control system, which has faster operation speed, lower failure rate, and can be upgraded remotely. * Adopts thickened hot dipped galvanized steel material, sturdy and durable. * 5 brushes (1 vertical lift top brush + 2 small vertical brushes + 2 large vertical brushes). * Strong water cleaning system and foam pump system. * Multiple functions: water washing-----foam-----brushing-----wax water washing. * With fault identification code, the fault is easy to identify and eliminate.
Request for a quoteCUPASO DEUTSCHLAND GMBH
Germany
Volumetric cup fillers enable the volumetric dosing of granular products. They can be fitted to all models of vertical form fill and seal machines and are offered in two series: 6 cups or 12 cups. Both models are equipped with a feed hopper with controlled outlet, a product level sensor, a series of cups made of food-grade material, a fixed lower cup carrier and, in automatic mode, a height-adjustable upper cup carrier with cup level sensor. The product is unloaded by gravity at the inlet of the packaging machine and, for fine products, the unloading system is equipped with a flap that prevents the product from spilling.
Request for a quoteHONSEL-GROUP
Germany
Small and light. With a weight of only 1.6 kg incl. battery, very compact dimensions and excellent ergonomics, the tool is perfectly equipped for daily use and every installation situation. Strong. 10,000 N setting force in combination with the new brushless motor makes it possible to reliably process any blind rivet up to 5.0 mm. Fast. With a pure setting process of less than one second, 30 blind rivets can be processed in 60 seconds. This means that the Rivdom eBZ 1 is twice as fast as comparable tools and saves more than 45 minutes working time per day! The ideal tool for industrial series production.
Request for a quoteSPRINGOS SP
Poland
R427A, also known as Forane® 427A, is an HFC blend. It is a non-toxic, non-flammable, zero-ODP (Ozone Depletion Potential) refrigerant. R427A has the lowest GWP of R22 retrofit replacement refrigerants. All fluorocarbon refrigerant gases contain one or more carbon and fluorine atoms and are organic compounds. Atoms of chlorine, hydrogen and bromine may also be present.
Request for a quoteCD AUTOMATION
Italy
The REVO PC unit is designed to handle applications with many zones. This enhanced unit, thanks to a particular algorithm, minimize your energy costs through the sync function and the power limit for each zone. Benefits include:Each loop’s process information is managed independently, Calculation of instant current and RMS Voltage, Current and Power Calculation of load resistance with Heater Break Alarm Modbus Master, Modbus slave, Profilbus DP, ProfiNet, Modbus/TCP, Ethernet IP and other Elimination of power overshoot (see video) Power factor close to one due to zero crossing firing REVO-PC keeps your instantaneous power within the limit of your electricity supply contract Prevents increases in energy supply tariffs imposed by your electricity supplier Quick return on your investment. Mishandling the Use of Power Results in Higher cost and Expensive Penalties for Exceeding the Contractual limits.
Request for a quoteCD AUTOMATION
Italy
The REVO PN unit is designed to handle applications with multiple zones. This enhanced unit, thanks to a particular algorithm, minimizes your energy costs through the synchronization and the power limit for each zone. Revo PN keeps your instantaneous power within the limits of your electricity supply contract. This product meets modern connectivity needs REVO PN responds to the modern need for connectivity, data acquisition, monitoring and diagnostics of industrial plants through the most widely used field bus systems.It’s the ideal complement to your PLC / MULTILOOP for improved power control. EACH ZONE INCLUDE: • Power managements • Current Measurements in True Effective Value • Power measurements • Voltage measurements • Load resistance measurement • Communication • Thyristor Units with high I2T • Synchronizing Circuit • 480V Max Voltage • Digital Input and Relay Output • Integrated Extra Rapid fuse
Request for a quoteCD AUTOMATION
Italy
It is an high reliability Universal SCR Power Controller that has an advanced microprocessor that makes it universal and fully configurable via software. Particular attention has been gived to the Connectivity with the most popular Field Bus and to the unit management via Wi-Fi (optional) and CD Automation Smartphone APP. REVO Connect is fully Software configurable. Current Rating 30 to 2100A for 3 Phase unit. Voltage Range 480V, 600V and 690V. CE-EMC Listed, EAC Listed, cUL 508 Listed up to 700A, UL Listed from 800A to 2100A. Universal Input: The std analog inputs 4:20mA and 0:10V and SSR Configurable via Software. All types of firing mode Half Cycle, Single Cycle, Burst Firing, Delayed Triggering Phase Angle and Soft Start. OLED display on front Unit: This display give better operator interface and delivers use-friendly intuitive messages. Universal Control Mode: Current, Voltage, Power, Open Loop. High precision measurement (True RMS Value for V,I and VxI) ≤1%
Request for a quoteCD AUTOMATION
Italy
REVO C is an high reliability Universal SCR Power Controller that has an advanced microprocessor that makes it universal and fully configurable via software. Particular attention has been gived to the Connectivity with the most popular Field Bus and to the unit management via Wi-Fi (optional) and CD Automation Smartphone APP. REVO Connect is fully Software configurable. Current Rating 30 to 2100A for 1 Phase unit. Voltage Range 480V, 600V and 690V. CE-EMC Listed, EAC Listed, cUL 508 Listed up to 700A, UL listed from 800A to 2100A. Universal Input: The std analog inputs 4:20mA and 0:10V and SSR Configurable via Software. All types of firing mode Half Cycle, Single Cycle, Burst Firing, Delayed Triggering Phase Angle and Soft Start. OLED display on front Unit: This display give better operator interface and delivers use-friendly intuitive messages. Universal Control Mode: Current, Voltage, Power, Open Loop.High precision measurement (True RMS Value for V,I and VxI) ≤1%
Request for a quoteCD AUTOMATION
Italy
It is an high reliability Universal SCR Power Controller that has an advanced microprocessor that makes it universal and fully configurable via software. Particular attention has been gived to the Connectivity with the most popular Field Bus and to the unit management via Wi-Fi (optional) and CD Automation Smartphone APP. REVO Connect is fully Software configurable. Current Rating 30 to 2100A for 2 Phase unit. Voltage Range 480V, 600V and 690V. CE-EMC Listed, EAC Listed, cUL 508 Listed up to 700A, UL listed from 800A to 2100A. Universal Input: The std analog inputs 4:20mA and 0:10V and SSR Configurable via Software. All types of firing mode Half Cycle, Single Cycle, Burst Firing, Delayed Triggering Phase Angle and Soft Start. OLED display on front Unit: This display give better operator interface and delivers use-friendly intuitive messages. Universal Control Mode: Current, Voltage, Power, Open Loop.
Request for a quoteCD AUTOMATION
Italy
REVEX is a real Universal Unit where you can select: • Input signal in digital mode, no link jumpers inside • Firing mode: Burst Firing, Zero Crossing • Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI • Communication RS485 with Modbus® protocol std. • Two Analog input • Two Digital input • USB port to program REVEX, should you ever need to re-program from your ordered configuration • With the units already programmed you can simply switch On and Go • Save money and time straight out the box without the need to read a long manual • Save money with REVEX and only pay for functionality you need
Request for a quoteCD AUTOMATION
Italy
REVEX is a real Universal Unit where you can select: • Input signal in digital mode, no link jumpers inside • Firing mode: Burst Firing, Zero Crossing • Voltage, Current and Power or V2 and I2 • Communication RS485 with Modbus® protocol std. • Two Analog input • Two Digital input • USB port to program REVEX, should you ever need to re-program from your ordered configuration • With the units already programmed you can simply switch On and Go • Save money and time straight out the box without the need to read a long manual • Save money with REVEX and only pay for functionality you need
Request for a quoteCD AUTOMATION
Italy
REVEX is a real Universal Unit where you can select: • Input signal in digital mode, no link jumpers inside • Firing mode: Single cycle, Half cycle, Burst, Phase Angle, Delayed Triggering, different types of adjustable ramp • Control Mode (V, V2, I, I2, VxI) • Communication RS485 with Modbus® protocol std. • Two Analog input • Two Digital input • USB port to program REVEX, should you ever need to re-program from your ordered configuration • With the units already programmed you can simply switch On and Go • Save money and time straight out the box without the need to read a long manual • Save money with REVEX and only pay for functionality you need
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CD AUTOMATION
Italy
REVO S 2PH Thyristor Power Controller is suitable for resistive and medium or long wave infrared loads Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 450A, 500A, 600A, 700A, 800A Voltage range 480V, 600V and 690V (starting from 60A) Fully isolated from the power Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable) Logic input signal 4 to 30Vdc typical (SSR) plus 4-20mA or 0-10Vdc Linear input as an option Constant current drain, independent of supply voltage with SSR input Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option Side by side mounting Special design Heatsink with high dissipation value IP20 protection Complies with EMC, EAC, cULus® 508 Listed and cUL® listed up to 700A as an option. UL® listed for 800A as an option.
Request for a quoteCD AUTOMATION
Italy
REVO S 1PH Thyristor Power Controller is suitable for resistive and medium or long wave infrared loads Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 500A, 600A, 700A, 800A Voltage range 480V, 600V and 690V (stating from 60A) Fully isolated from the power Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable) Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option Constant current drain, independent of supply voltage with SSR input Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option Side by side mounting Special design Heatsink with high dissipation value IP20 protection Complies with EMC, EAC, cULus® 508 and cUL® us listed up to 700A as an option. UL® listed for 800A units. Can be used in conjunction with REVO-PC to provide multi-zone control
Request for a quoteCD AUTOMATION
Italy
CD3000S 3PH is a three leg switching three wire resistive load. General description Up to 90A. Applicable for resistive loads and infrared lamp. Fully isolated from power. Applicable for resistive loads. Zero crossing firing. Logic input signal SSR. Constant current drain. Side by side packaging. Special design for heatsink with high dissipation IP20 protection Comply with EMC specification CE and cUL
Request for a quoteCD AUTOMATION
Italy
CD3000S 2PH two leg switching three wire load star or delta resistive loads or infrared lamps up to 90A. Fully isolated from power. Zero crossing firing available with logic input signal (SSR) Constant current drain with SSR input Analog input 4÷20mA or 0÷10V with burst firing 4, 8 or 16 cycle at 50% power demand, is available as an option from 35A to 90A. Heater break alarm (HB) to diagnostic partial or total load failure and short circuit on thyristor, is available as an option from 35A to 90A Side by side mounting. Special design for heatsink with high dissipation Comply with EMC specification CE and cUL
Request for a quoteCD AUTOMATION
Italy
CD3000S 1PH is a compact low cost family of solid state switches designd to replace contactors Single-phase thyristor units up to 90A. Applicable for resistive loads and infrared lamp. Zero crossing firing available with logic input signal (SSR) Constant current drain with SSR input Analog input 4÷20mA or 0÷10V with burst firing 4, 8 or 16 cycle at 50% power demand, is available as an option from 15A to 90A Heater break alarm (HB) to diagnostic partial or total load failure and short circuit on thyristor, is available as an option from 15A to 90A Side by side mounting Special design for heatsink with high dissipation IP20 protection Comply with EMC specification CE and cUL
Request for a quoteCD AUTOMATION
Italy
REVEX PA is the latest born in the REVEX family. The REVEX are positioned between the two families REVO S and REVO C in terms of price and performance. The main characteristic is that they can be configured according to your needs by eliminating of all options that you do not want to use, in order to reduce the purchase price. It is an extremely flexible and performing unit. The REVEX PA is a three-phase unit with higher functions compare to the other REVEX 3PH models, because it is able to carry out phase angle firing with or without Current Limit. REVEX PA is therefore a unit suitable for driving inductive loads, such as three-phase transformers. The algorithms inside the unit allow the control of the power even for special loads, such as MoSi2 and SiC heating elements. It is suitable for controlling both normal resistive loads and short, medium or long wave infrared lamps.
Request for a quoteCD AUTOMATION
Italy
REVO PB allows you to reduce the costs of electricity in industrial thermal processes. REVO PB is able to optimize your industrial electric heating systems and make your production processes more flexible. With traditional heating systems based on resistors and multi-zone power controllers, when you turn on the load you have a great impact on the peak absorption and when you modulate the load to keep the temperature constant you introduce a lot of disturbances into the electrical network. This leads to possible malfunctions of the electronic control and penal systems by the energy supplier. REVO PB power controllers are among the latest in the REVO family expanding REVO PN Family up to 90 A per channel. This is the ideal unit in cases where it is necessary to control and optimize the power. Its optimization algorithm, like an orchestra conductor, distributes the required power of the individual zones while keeping the total power absorbed on the line as constant as possible.
Request for a quoteCD AUTOMATION
Italy
The power controllers REVO TH are one of the latest born into the REVO family. Despite the formidable compactness, inside there are three independent SCR power units , which thanks to thyristor abundantly oversized in their junctions, they can manage currents up to 90A with a maximum voltage of 600V. Using Modbus and/or the more common fieldbus, multiple units can be connected to each other and therefore the ideal application area is the control of heating elements on multiple zones such as the simultaneous control of multiple IR lamps. Other application sectors can be for example: Multizone ovens Machines for plastics (extruders and extrusion lines, extrusion heads and hot runner mold control units) Packaging machines Ovens with long, medium and short wave IR lamp
Request for a quoteCD AUTOMATION
Italy
The REVO RT is a compact power controller unit, which integrates inside a single phase static group for each loop for control of the electrical power. Each unit manages 3 independent control loops. The unit can be purchased with the diagnostic functions for the load and for the SCRs. In this case there is a amperometric transformer for each channel. Each power channel is always equipped with extra rapid fuses . The power inside the unit, current transformer and extra rapid fuses in a single unit save a considerable space inside the panel and time for wiring . Available in the following currents: 35, 50, 75 and 90A with maximum voltages 480V and 600V.
Request for a quoteMITA COOLING TECHNOLOGIES
Italy
Performance, savings and environmental sustainability thanks to a patented Plug & Play subcooler for refrigeration systems working with R744 (CO2) and fluorinated refrigerants (HCFC, HFC, HFO).
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Pilz products in our stocks: 773103 Pilz Safety Relay 751330 Pilz Safety Relay; Pnoz S30 C; Usup: 24÷240Vac; 772143 Pilz Pnoz Ef I/O Module 772170 Pilz Pnoz M Ef Series Input Module, 24 V Dc 772002 Pilz PNOZ mm0.2p 773105 Pilz p/n: 773105, Type: PNOZ m1p base unit coated version
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
ACS880-01-065A-5 ABB ACS880 Driver
Request for a quoteResults for
Systems equipment - Import exportNumber of results
131 ProductsCountries
Company type
Category