Motor system - Import export

dryve motor control system - select, click, control... Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for drylin® E linear systems. - No software or app installation necessary, fast commissioning - Control possible via smartphone (browser), tablet or laptop - Simple and intuitive user interface, control system set up in just a few minutes - Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff) - For DC, EC and stepper motors - Cost-effective

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

The drive technology online configurator gives you the right drive technology system after you enter your requirements. You also have the option of requesting or ordering motors and other accessories, such as the motor control system. - Fast and easy configuration - Optional accessories - Detailed parts list - Fast delivery

ZLN miniature toothed belt axis based on the low-profile guide system drylin® N. System width 40mm, installation height 28mm. Ready-to-install system with stepper motors or BLDC/DC motors. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

Drive units with 3 DOF with angle sensors Drive units with 4 DOF with angle sensors Drive units with 5 DOF with angle sensors robolink® drive units for all articulated arms Significantly expanded workroom Freely configurable arm length through modular design Step motor driven Alternative drive/control systems easily possible Drive units with 3 DOF with angle sensors Drive units with 4 DOF with angle sensors Drive units with 5 DOF with angle sensors

Drive unit 3 DOF Drive unit 4 DOF Drive unit 5 DOF robolink® drive units for all articulated arms Significantly expanded workroom Freely configurable arm length through modular design Step motor driven Alternative drive/control systems easily possible Drive unit 3 DOF Drive unit 4 DOF Drive unit 5 DOF

specially designed to cut fruits & vegetables in desired shape & size with slicing attachment of cubing, Shredding and finger in one single machine with conveyor system complete with motor and gearbox, complete made of stainless steel.

The new HONSEL battery-powered riveter is now the ultimate solution for battery-powered processing of blind rivet nuts and blind rivet studs up to M12. Designed to meet the requirements of industrial series production, Rivdom eVNG 2 offers a wide range of useful features and options. Innovative. Robust and reliable. Depending on the fastener to be processed and the application, Rivdom eVNG 2 can be operated either force-controlled or stroke-controlled via the menu on the control display. Rivdom eVNG 2 has a patented gearbox with two independently operated BLDC motors. This allows the system to be switched on and off variably during the return journey.

copy system Drainage system with independent motors Triple bit cremone system Includes profile support. Options Milling for 8 mm Single phase system Milled cooling system

The usable cutting area is available in multiple sizes allowing to process small to extra-large fabrics rolls. The SM-332-TA reaches speeds of up to 90 m/min with an acceleration of 1G with a motion repeatability +/- 0,1 mm. The cutting area is sectioned to concentrate the vacuum power in specific areas. Pressure bar and side grippers for synchronized movement of the conveyor with the fabric. Motorized conveyor belt to maximize cutting accuracy on long lengths. The SM-332-TA can be equipped with an optional motorized unwind system for large rolls with automatic material alignment control and correction and a digital tension control system.

Three sets of servo motor position systems, position accuracy +/ 0.2mm. Working capacity up to 57 600 pieces of abrasive disc per 8 hours with two cavity cutting die to cut two plies of roll material. User friendly computer control and 100 cutting program memory provides easy operation. Punch slugs go through punch tube to slug box under head and you can use a vacuum cleaner to clear out the slugs. Cut part auto knock out & stacking system will stack cut parts to preset quantity ready to be packed. This function can save several workers. Auto cutting directly from jumbo rolls can not only simplify manufacturing process, but also achieve material savings up to 15%. Unique stainless steel grid plate feeding device & stacking system can achieve perfect feeding & stacking results for all kinds of non woven felt, Velcro backing

Removing the roller tracks by independent heating up to 220 ° C Adjustable speed of laying tracks up to 5 m / min Manual loading of sheets Side guides adjustable micrometer Winding device holder with the magnetic track detection cell in case of breakage. Mounting Tape with voltage control, and adjustable positioning guides the rollers. Positioning + or 0.1 mm servo motor 0,75 KW Cleaning system with a double face support roller on the output Storage formats tracked on a table with two anti static positioned before the guillotine and before the table Touch screen control friendly, multi lingual (French and / or English), setting and trimming various counts Use of electrical, hydraulic and pneumatic standardized Safety guards for strict compliance with CE OPTIONS MTL 700 NSA automatic loading of sheets Roller and additional heating system for a different bandwidth

Using the pressure and temperature, the stripes are applied to the overlay or the sheet, while the protective film is removed and wound on a support. The machine can be equipped with a guillotine for cutting formats, or (and) a reel for the overlay after removing the piste. The machine can also be equipped with two systems to work on leaves and on roll. Unwinder roll overlays on mandrel Side guides adjustable micrometer Winding device holder with the magnetic track in the event detection cell decasse. Mounting Tape with voltage control, and adjustable positioning guides the rollers. Positioning + or 0.1 mm servo motor 0,75 KW Cleaning system with a double face support roller on the output Storage formats tracked on a table with two anti static set before laguillotine and before the table or rewound Touch screen control friendly, multi lingual (French and / or English), setting and trimming various counts Use of electrical

The filling equipment for delicatessen that combines speed and efficiency The Filler EVC-2000 is the equipment you will want as an ally for filling in delicatessen. Chorizo, fresh sausage, sausage, salami, etc. It combines a 10-fin motor feeding system, reducing losses and preventing stains and bubble formation, while controlling the exact size of the portions. A filling solution for optimal results on your production line. The HF-250 hamburger maker is state-of-the-art equipment to produce a wide range of hamburger shapes and sizes. The mold filling system is automatic, guaranteeing uniformity and quality of the final product. Speed and pressure configured on touch panel Greater efficiency Extra income Touchscreen system Control panel with microprocessor Final product quality guaranteed 100%