Battery packs - Import export

This portable power supply for medical use is a nice example of co-creation. Our client came up with the idea to create a powerful battery for the medical world. It can be used on equipment trolleys that allow the medical personnel to get right up to the patients’ beds. The battery is so powerful that one charge is enough to power it for an entire shift. Naturally, this battery pack had to be properly protected and practical to use. That is where Enbi Plastics came in. From the very beginning, we were involved in product development: from the first sketches to a complete end product that helps medical professionals do their work. For the design, we took into account practical usability and safety: there are no sharp edges, the battery pack is splash proof and the design underwent drop tests. In addition, the choice for medical grade plastic means it is also easy to clean. The addition of the inserts – gilded contacts – required a lot of precision. These are melted in by us in-house.

Our stack-type residential lithium battery packs are specifically designed for residential applications. With our battery technology, you can effortlessly integrate it with a mainstream inverter in various scenarios to reduce your electricity bill and provide backup power during grid outages or unavailability.

Fast helper when storing goods and unloading trucks Good handling, thanks to the side lift directly from the operator's cab Particularly small turning radius thanks to practical rear steering Fast charging and high energy density, thanks to the innovative Li-Ion battery pack Grab handles, adjustable seat and intelligently placed steps for ergonomics Stepless lifting of the fork, thanks to the triplex lift mast Guaranteed spare parts supply and customer service

Fast helper when storing goods and unloading trucks Good handling, thanks to the side lift directly from the operator's cab Particularly small turning radius thanks to practical rear steering Fast charging and high energy density, thanks to the innovative Li-Ion battery pack Grab handles, adjustable seat and intelligently placed steps for ergonomics Stepless lifting of the fork, thanks to the triplex lift mast Guaranteed spare parts supply and customer service

Torque Screwdriver with reversible digital display Tohnichi's digital screwdriver STC2-G is ideal for controlled screw tightening or inspections. Manual screw tightening always represents a risk because fasteners are often overloaded and a fracture hazard. This risk is minimized by the torque screwdriver with LED indicator ring and reversible display. The STC2-G is powered by a Li-Ion battery pack that allows a continuous use of up to 30 hours. Available measuring units are cN·m, kgf·cm, Lbf·in, and ozf·in. Up to 1000 readings can be stored in the internal memory. The display of STC2 -G can be reversed, whereby the reading from the respective viewing angle is greatly facilitated. This increases the reliability of results and ease of use. Key Features Accuracy ± 1% Track or Peak mode in both directions 3-colour LED indicator ring shows torque status Memory for up to 1000 readings USB interface for data export 1/4“ hex insert for bits and adaptors acc. to DIN 3126 E6.3

In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.

In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.

In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.

The package includes Battery pack Mounts for mounting 2 pcs External battery cable 2 pcs User's manual

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS.

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS.

An optional battery pack can be connected to the UPS to extend the available runtime. Up to four Battery Modules can be connected to one UPS.

Cradle 10535 Steel cradle, open Suitable for 1400ml (3:1) 2K side-by-side cartridges Application example: auto windscreen adhesive, hybrid adhesive... Lithium-ion battery pack with 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 40 minutes Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits LED charge indicator on the battery pack Clean, even working Less fatigue, particularly when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 90W Output: 14.4V A 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-10535-14.4V / Li-Ion 1 battery pack 14.4V // 3.0AH // Li-ion (lithium-ion) 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight: complete set in transport case

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-14.4V Li-ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 14.4V Li-ion battery pack 1 rapid charger with charge indicator and Euro plug 1 plastic case Additional battery pack available on re

Cartridge cradle 3030 Suitable for 600ml 1:1 side-by-side cartridges Application example: Using 600ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3030-14.4V Li-ion 1 cartridge press for 600ml 1:1 side-by-side cartridges 1 battery pack, 14.4V Li-ion 1 rapid charger with charge indicator and Euro plug 1 plastic case Additional battery pack available on

Cartridge cradle 7575 Suitable for 1500ml 1:1 side-by-side cartridges Application example: Using 1500ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 30 minutes Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1500ml side-by-side cartridges per battery charge. Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7575-10.8V Li-Ion 1 cartridge press for 1500ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight

Cartridge cradle 3015 Suitable for 450ml 2:1 side-by-side cartridges Application example: Using 450ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 10.8V // 1.5AH with LED charge indicator Rapid charger with charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 450ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electrical cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3015-10.8V Li-Ion 1 cartridge press for 450ml 2:1 side-by-side cartridges 1 10.8V li-ion battery pack 1 rapid charger with charge indica

Cartridge cradle 9545 Suitable for 1400ml 2:1 side-by-side cartridges Application example: Using 1400ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 30 minutes Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-9545-10.8V Li-ion 1 cartridge press for 1400ml 2:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and

Steel sheet cradle with position rod 310ml coaxial cartridges Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 120 – 240mm/min Benefits Continuous and clean work Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: AC 230V ~ 50Hz 55W Output: DC 12 … 2.45A 28.8VA Security: CE checked Packaging Cordless caulking gun HPS-3CS-12V NI-MH NI-MH battery pack 12 / 2.0AH Battery charger with Euro plug Blow mould case Back up battery on request

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked Packaging DynamicMax Type HPS-6T-10.8V Li-Ion 1 pc. Li-Ion battery pack 10

Cartridge cradle 4C Suitable for 380ml to 410ml 10:1 coaxial cartridges Application example: Using 380ml to 410ml 10:1 coaxial cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 10.8V // 1.5AH with LED charge indicator Rapid charger with charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 380ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electric cables in the working area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-4C-10.8V Li-Ion 1 cartridge press for 380ml to 410ml 10:1 coaxial cartridges 1 10.8V Li-ion battery pack 1 rapid charger

Cartridge cradle, suitable for 310ml 1:1 coaxial cartridges as well as 310ml 1K cartridges Application example: Using 310ml 1:1 coaxial cartridges of e.g. fire-extinguishing foam. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3C1-10.8V Li-ion 1 cartridge press for 310ml 1:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger w

Cartridge cradle 7515 Suitable for 900ml 5:1 side-by-side cartridges Application example: Using 900ml 5:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7515-10.8V Li-Ion 1 cartridge press for 900ml 5:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with c

Cartridge cradle 3030 Suitable for 600ml 1:1 side-by-side cartridges Application example: Using 600ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 600ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3030-10.8V Li-Ion 1 cartridge press for 600ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with c

Cartridge cradle 2020 Suitable for 400ml 1:1 side-by-side cartridges Application example: Using 400ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Packaging PowerMax type HPD-2020-10.8V Li-ion 1 cartridge press for 400ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and Euro

Cartridge cradle 1010, Suitable for 210ml 1:1 side-by-side cartridges Application example: fitting door frames, installing stairs... Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked Packaging PowerMax type HPD-1010-10.8V Li-ion 1 cartridge press for 200ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-Ion 1 rapid

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 825ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-10.8V Li-Ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger wit

Cartridge cradle 6030 Suitable for 900ml 2:1 side-by-side cartridges Application example: Using 900ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-6030-10.8V Li-Ion 1 cartridge press for 900ml 2:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge