Results for
MIRO GLOVES
Czech Rep.
The glove is made of especially produced composite fibre Brinix MAX5, polyamide and polyethylene fibres. While retaining the properties of the fine glove (tactile sensitivity), it achieves excellent values in terms of abrasion resistance and resistance to cutting according to EN 388. This glove can no longer be compared to an aramid glove a similar glove is very difficult to make of aramid. The glove does not contain glass fibres, which break when working with and can cause problems. The glove is especially suitable for assembly work, handling sheet metal, handling building materials etc., where there is a risk of cutting, scratches and abrasions. Due to the construction of the glove, it also has an excellent gripping ability. GRIP – the glove is lined with PVC nonslip fabric.
Request for a quoteMIRO GLOVES
Czech Rep.
The gloves are made of 100% polyamide with carbon fibre admixture. They have excellent grip ability, are soft and flexible, and are primarily used for the protection of products against static electricity and for protection of hands against mechanical risks (dirt, scratches, abrasions). Complies with EN 6134051 with typical values <10^7 Ω resistence through the wearer to groundable point Rg. Electrostatic dissipative. The gloves comply with the relevant articles of the EN 420 + A1 and EN 388 standards, meet the requirements for antistatic features according to EN 11495, and further meet the requirements of EN 11491 for Electrostatic Properties – Specific Surface Resistance.
Request for a quoteMIRO GLOVES
Czech Rep.
Kevlar© (Aramid) and Dyneema (polyethylene) fibre (50/50%) flexible sleeve serves to protect the forearm against cutting by blade (class 3 in accordance with E 388). Using Dyneema (polyethylene) have the sleeve better mechanical properties. Options the sleeve is produced in different lengths 10 cm, 20 cm, 35 cm, 55 cm etc. or on customer wish The sleeve can be fitted out with the thumbhole or/and Velcro strips
Request for a quoteMIRO GLOVES
Czech Rep.
Kevlar© (Aramid) fibre flexible sleeve serves to protect the forearm against cutting by blade (class 3 in accordance with E 388). Options the sleeve is produced in different lengths 10 cm, 20 cm, 35 cm, 55 cm etc. or on customer wish. The sleeve can be fitted out with the thumbhole or/and Velcro strips. The comparison table of values according to EN 388 The comparison table of values according to EN 407
Request for a quoteMIRO GLOVES
Czech Rep.
Protective mittens, the outside layer is made of the Kevlar© (Aramid) fibre and the inner layer is the loop wave cotton insert. The mittens are designated as a protection against contact heat of 250°C. It means that any object of 250°C can be held by this mitten longer than 15 sec. In addition these mittens guarantee a high cut resistance. The comparison table of values according to EN 388
Request for a quoteMIRO GLOVES
Czech Rep.
Full cow split leather glove with cut ressistant Panzerhand S1 liner. These gloves are suitable for coarse work with sharp objects, especially sheet metal. A resistant liner inside the glove protects the skin, and thereby prevents work accidents, in the event that the glove is cut. The comparison table of values according to EN 388
Request for a quoteMIRO GLOVES
Czech Rep.
Protective double loop 100% cotton glove. The gloves are designated as a protection against contact heat of 250°C. In the practice it means that any object of 250°C can be held by this glove longer than 15 sec. The comparison table of values according to EN 388
Request for a quoteMIRO GLOVES
Czech Rep.
Coarse knitted fabric thick (4x Kevlar©) The gloves reach class 4 according to EN 388 of resistance against cuttingthrough by blade, which is the highest value. Kevlar (aramid) gloves are independent from the construction and at the same mass 67 x more cut ressistant than leather products. Gloves made of this fibre will withstand over a long time temperatures up to 250°C and over a short time term up to 700°C. They are high ressistant against tearing, burning and contact heat. Kevlar is registered mark of the firm DuPont. The comparison table of values according to EN 388
Request for a quoteMIRO GLOVES
Czech Rep.
Fine close knitted fabric thinner (2x Kevlar ©). The gloves reach class 2 according to EN 388 of resistance against cuttingthrough by blade (the highest class is 5) but they are very fine and keep the feeling in the hands. The comparison table of values according to EN 388
Request for a quoteMIRO GLOVES
Czech Rep.
Gloves with a high content of thermofibres (minimum 50%) especially designed to work in cold environments. They are suitable for handling cold objects, like when placing chilled food into refrigerating boxes. Category 1, minimum risk, CE EN 420
Request for a quoteMIRO GLOVES
Czech Rep.
Gloves designed for foodstuff industry and for „Work with Food“. The gloves provide good protection against dirt, scratching or grazing. The gloves comply with the requirements of Regulation (EC ) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food. This is documented by a specific certificate. The gloves provide good protection against dirt, scratching or grazing. Category 1, minimum risk, CE EN 420 Options Silvernite An antibacterial version of Foodhand gloves containing nanofibre enriched with silver ions. The silver has permanent antibacterial effects. According to EN ISO 20743, the gloves are classified as „Red Level“ i.e. the antibacterial effect resists 50 washing cycles. The treatment is efficient for food processing.
Request for a quoteMIRO GLOVES
Czech Rep.
A protective, top quality cut resistant glove. The glove is a technical innovation of the model successfully manufactured since 1983, based on patent technology (invention) while applying modern materials and procedures as well. Due to the new technologies, the glove is more resistant and pleasant to wear. In order to increase the protection level, the hem is extended by 4 cm. The biggest area of applications is in jobs with a high risk of hand injury caused by a cutting edge, namely in the foodstuff industry e.g. chopping the glove is a cheaper and more comfortable alternative to looped gloves. It is useful in other industrial branches as well (for example, sheet metal manufacture etc.). The glove is resistant to contact heat of 100oC according to EN 407 (class 1). The glove is in conformity with EN ISO 13997 as for surface cut, achieving excellent results of 52.9 N (Newton). In comparison, 22 Newton corresponds to class 5 according to EN 388.
Request for a quoteMIRO GLOVES
Czech Rep.
A softer version of the Panzerhand model. The gloves are softer yet still highly resistant. They allow more sensitivity in the fingers. The model is suitable in jobs with a risk of injury with cutting edges or a knife while you have to work with smaller items (for example, on an assembly line). The glove is resistant to contact heat of 100oC according to EN 407 (class 1). The glove is in conformity with EN ISO 13997 as for surface cut, achieving excellent results of 48.5 N (Newton). In comparison, 22 Newton corresponds to class 5 according to EN 388. The gloves comply with the requirements of Regulation (EC ) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food. This is documented by a specific certificate. The gloves do not contain any glass fibres, which break to pieces during work and can remain in the food being handled!
Request for a quoteMIRO GLOVES
Czech Rep.
A softer version of the Panzerhand model. The gloves are softer yet still highly resistant. They allow more sensitivity in the fingers. The model is suitable in jobs with a risk of injury with cutting edges or a knife while you have to work with smaller items (for example, on an assembly line). The glove shows the highest figures according to EN 388 The glove is resistant to contact heat of 100oC according to EN 407 (class 1). The glove is in conformity with EN ISO 13997 as for surface cut, achieving excellent results of 28 N (Newton). In comparison, 22 Newton corresponds to class 5 according to EN 388. The gloves do not contain any glass fibres, which break to pieces during work! Gloves are offered in different versions GRIP – gloves are fitted with nonslip PVC dots SKIN – split cow‘s leather is sewn on the palm
Request for a quoteMIRO GLOVES
Czech Rep.
Sharpking this glove is created from a special composite yarn with glassfiber, polyethylene, polyamide and other ressistant fibres. Retaining fine glove features (feeling in fingers) this glove reaches outstanding values of both abrasion and cut resistence according to EN 388. These gloves contain glass fibres. These gloves are particularly suitable for assembly work, handling sheet metal, handling construction materials, etc., where there is a risk of cuts, scratches, and abrasion. Due to its construction, the glove has an excellent grip ability. Gloves are offered in different versions GRIP – gloves are fitted with nonslip PVC dots SKIN – split cow‘s leather is sewn on the palm; these gloves are primarily used for handling oily sheet metal, on assembly lines, in the construction industry for handling rough materials, in the repair of agricultural machinery, etc. The glove is even resistant against punctures in the reinforced split leather area.
Request for a quoteMIRO GLOVES
Czech Rep.
AntiCut MAX5 this glove is created from a special composite yarn Brinix N5 with steel, polyethylene, polyamide and other ressistant fibres. Retaining fine glove features (feeling in fingers) this glove reaches outstanding values of both abrasion and cut resistence according to EN 388. This glove cannot be practically compared with the Aramid one a similar glove would be produced very hardly. The gloves do not contain any glass fibres, which break to pieces during work! These gloves are particularly suitable for assembly work, handling sheet metal, handling construction materials, etc., where there is a risk of cuts, scratches, and abrasion. Due to its construction, the glove has an excellent grip ability.
Request for a quoteMIRO GLOVES
Czech Rep.
AntiCut HT3 this glove is created from a special produced composite of polyethylene and polyamide fibres. In comparison with the glove manufactured from Aramid fibres it is substantially more both abrasion and cut resistant. They can be used advantageously for increased resistance to cuts and abrasions in cases where thermal resitance is not required (this especially affects durability), and also provide protection against the fall of sharp edges. AntiCut HT3 represent a more resistant version of AntiCut HT2 gloves. The comparison table of values according to EN 388
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MIRO GLOVES
Czech Rep.
AntiCut SINGER This glove is created from a special produced composite of polyamide fibres. Due to a coarser structure they are suitable for heavier work – handling sheet metal, construction material, etc. The comparison table of values according to EN 388
Request for a quoteMIRO GLOVES
Czech Rep.
AntiCut H2 This glove is created from a special produced composite of polyamide fibres. Due to their coarser structure they are also suitable for heavier work – handling sheet metal, construction material, etc. Gloves are offered in a variety of designs. The comparison table of values according to EN 388
Request for a quoteMIRO GLOVES
Czech Rep.
AntiCut Soft1 The glove consists of two layers the outside layer is from polyamide (abrasion resistant) and the inner layer is from cotton that creates a comfortable environment for hands. Due to the use of elastic materials, the gloves are very flexible and easily adapt to the shape and size of the hand. Preferably used in places where you need to handle small objects, on assembly lines, in the production of electronics, anywhere there is a risk of dirt, scratches or abrasions at work.
Request for a quoteMIRO GLOVES
Czech Rep.
Protective gloves with an outer layer made up of Twaron fibre (Aramid), and the inner layer containing a looped cotton liner. The gloves serve as protection against contact heat of 250°C. In practice, this means that an object with a temperature of 250°C can be held in the glove longer than 15 seconds. In addition, these gloves also guarantee high resistance to cutting.
Request for a quoteMIRO GLOVES
Czech Rep.
The flexible sleeve made of Twaron material (Aramid) serves as forearm protection against blade cuts (class 4 according to EN 388). Variants the sleeve is made of various lengths of 10 cm, 20 cm, 35 cm, 55 cm etc., or at the customer’s request. The sleeve can be complemented with a thumb hole and/or Velcro fastening.
Request for a quoteMIRO GLOVES
Czech Rep.
Natural material without chemical treatment Adaptability to the shape of the hand, when worn for a long time, the glove retains its shape according to the hand of the wearer Good moisture insulation Hygroscopy wool insulates well against the cold, even when wet Warmth dry heat The robust woolen knitted fabric of these gloves is modified and compacted using a special technology to increase its thermal insulation performance and resistance to penetration of cold wind and loose snow. At the same time, the glove remains breathable from the inside and thus prevents excessive sweating of the palms, thus preventing the creation of an environment for the multiplication of bacteria on the skin, which further strengthens the natural antibacterial properties of sheep wool. Schoeller pure wool yarn used, from which these gloves are made, meets the world’s strictest Swiss environmental standard bluesign.
Request for a quoteMIRO GLOVES
Czech Rep.
Diamondand gloves are made from specially treated cotton with the subordinated single goal to retain as little dust on the gloves as possible so that no tracks remain on the surfaces of work products. The gloves are especially suitable for working with jewels, gold, silver and diamonds, but, of course, also for working with archival materials, antiques and for restoration works. The gloves are packed separately as a pair in an airtight bag with a flap to prevent their soiling. Each bag bears a sticker with a size so there is no need to remove and try on the glove.
Request for a quoteMIRO GLOVES
Czech Rep.
Superanatomic – unlike standard gloves on the market, our glove is designed and manufactured with regard to the real anatomical shape of the human hand. The thumb is shaped anatomically towards the palm of the glove, which does not create “folds” and the glove properly encloses the hand. Another adjustment is for the little finger – the little finger is placed on the hand a little lower than the other fingers, our glove takes this anatomical element into account, and the little finger is placed lower on the glove than the other fingers. Wash the gloves by hand by squeezing in a detergent bath at a maximum temperature of 3040°C. After washing, rinse them several times in clean lukewarm water. Drain the gloves gently by squeezing – without twisting. Spread the wet gloves on a flat surface, carefully level them in their original shape, and allow them to dry slowly.
Request for a quoteMIRO GLOVES
Czech Rep.
This glove is a lighter version of the Panzerhand M2 gloves. It is a softer, but highly durable glove. When working, it allows for greater tactile sensitivity. It is suitable wherever there is a risk of injury from sharp edges or blades and, at the same time, it is necessary to work with smaller objects (e.g. on an assembly line). The gloves are also used in the food industry, especially for meat cutting. The glove complies with EN ISO 13997 for surface cutting and achieves excellent results of 60.0 s (Newton). For comparison, 22 Newton is a value corresponding to class 5 according to EN 388. The gloves comply with the requirements of Regulation 1935/2004 of the European Parliament and of the Council for materials and articles intended to come into contact with food. This is evidenced by the relevant certificate. The gloves do not contain glass fibres, which break when working with and may remain in processed food! Varianta Silvernite
Request for a quoteResults for
Fabrication - Import exportNumber of results
32 ProductsCountries
Company type
Category