Cylinder tube - Import export

Cylinder tubes

Cylinder tubes

Cylinder tubes

We produce clear plastic cylinders (rounded boxes), different diameters and heights. The cylinders (tubes) in the image have 8 cm diameter. The height is on request. Other diameters we can produce are 3,7 cm; 4,5 cm; 6 cm; 8 cm; 10 cm; 12 cm; 12,7 cm; 15,7 cm; 16,5 cm; 20 cm. For others diameters please ask for quotation.

These short molded components are fused to measurement electrodes and serve as filling/draining ports for the electrodes. The beaded edge is ideal for connecting rubber or plastic hoses. The ports are usually made of lead, borosilicate, and soda glass.

If required, we can supply capillaries and tubes with predetermined break points. For this purpose, the component is notched at the required breaking location. If the component is then subjected to a bending force, it will break at the notched point. To prevent unintended breakage, we recommend using medium or thick-walled tubes and capillaries.

Twisted glass tubes and capillaries are produced simply by heating and twisting. By this means, the tubes obtain a large internal surface in relation to their length, enabling them to be used e.g. as cooling sections. Another application area is for ornamental and design articles.

Cloning cylinders or rings are ideally suited for separate cloning if individual cells or cell groups on a nutrient solution. A specific cell or cell group is separated from the other cells in the nutrient solution by simply placing the cloning ring over it. The rings are made of high-grade borosilicate glass, and can be thermally sterilized without problems. The ring faces are ground perfectly flat, enabling the rings to be fixed e.g. to the floor of a Petri dish by means of a suitable grease. Subsequently, the nutrient solution is filled into the ring. The grease provides a seal between the ring and the Petri dish, whereby the precision-ground flat end ensures that very little grease is required to provide an optimum seal. The same applies in the case of Petri dishes prepared with a nutrient solution – here, the seal is provided simply by pressing the ring into the solution and down to the floor of the dish. Cloning cylinders

As a special service, we offer glass tubes and cylinders with calibrated inside diameters. Hereby, a special tool is used to bring the internal diameter precisely to the desired shape and dimension. Apart from the standard circular shape, the tubes can also be square or conical. Moreover, the outer tube diameter can be calibrated by means of cylindrical grinding. This grinding procedure results in a matt outer surface, which can be corrected by subsequent “technical polishing”.

EN 10305-1 HP OD 50 - 125 mm | WT 5 - 7,5 mm EN 10305-1 HPK (Ra inside max 0,4 μm) OD 20 - 140 mm | WT 2 - 30 mm EN 10305-1 HPS (Tol. H8, Ra inside max 0,3 μm) OD 50 - 180 mm | WT 5 - 22,5 mm EN 10305-2 HPS (Tol. H9, Ra inside max 0,8 μm) OD 35 - 115 mm | WT 3 - 7,5 mm EN 10305-2 HPZ OD 35 - 130 mm | WT 3 - 7,5 mm

Item No. : PT-007 Paper tube with clear plastic cylinder, embedded cotton string hangtag in lid, clear PET cap in lid and base. Product made of 157gsm art paper, PET cylinder, 1.5mm thick tube, clear PET vac tray and cotton string hangtag. We have seamless edge cylinder and seamed edge cylinder for customer's option. The plastic cylinder can be printed or foil stamped with customer’s illustrations and trademark. Plastic cylinder’s diameter and height can be adjusted based on customer’s request. Unique design suitable for the packaging of chocolates, candies, tea tins and more.

hard plastic carry ase holds two cylinders, a regulator and tubing light and robust

Item No. : PT-007 Paper tube with clear plastic cylinder, embedded cotton string hangtag in lid, clear PET cap in lid and base. Product made of 157gsm art paper, PET cylinder, 1.5mm thick tube, clear PET vac tray and cotton string hangtag. We have seamless edge cylinder and seamed edge cylinder for customer's option. The plastic cylinder can be printed or foil stamped with customer’s illustrations and trademark. Plastic cylinder’s diameter and height can be adjusted based on customer’s request. Unique design suitable for the packaging of chocolates, candies, tea tins and more.

Telescopic hydraulic cylinders consist of multiple steel tubes, each with a progressively smaller diameter, nested inside one another. This design allows the cylinder to be compact when retracted and significantly extend to a longer length when in use.

The MBS hydraulic cylinders of the MZR-1007 series are synchronized cylinders with pivot pins for robust, high-frequency use in general mechanical engineering. The cylinder is connected via a pivot pin ring, which can be variably screwed to the cylinder tube, and a threaded neck on the piston rod, which is designed for rod ends according to DIN24338 / ISO6982. There are also connection bores for pipe connections according to BSPP ISO 1179-2. Hub and piston rod overhang are variably selectable. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information

The different kinds of cold drawn tubes ready on stock cover a wide range of applications: COLD DRAWN SEAMLESS AND WELDED TUBES SUITABLE FOR HONING. COLD DRAWN SEAMLESS AND WELDED TUBES INSIDE H8. COLD DRAWN SEAMLESS TUBES FOR SHAFTS. WELDED SMOOTH BORE CYLINDER TUBES INSIDE H9 OR H10. COLD DRAWN SEAMLESS TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS. Seamless and Welded Cold Drawn pipes honed or ready for honing; H8, H9 or H10. STEELGRADES AND DELIVERY CONDITIONS COLD DRAWN / HARD (+C acc. EN 10305 / BK acc. DIN 2391) No heat treatment after final cold drawing. COLD DRAWN / SOFT (+LC acc. EN 10305 / BKW acc. DIN 2391) The final heat treatment is followed by a suitable drawing pass (limited reduction of area). STRESS RELIEVED (+SR acc. EN 10305 / BK+S acc. DIN 2391) After the final cold drawing process, tubes are stress relieved in controlled atmosphere in order to reduce work hardening due to the cold forming process. ANNEALED (+A acc. EN 10305 / GBK acc. DIN 2391) After...

SAMSYS offers Spindle Liner for draw tube diameters from 38mm to 100mm. The length of the reduction tube depends on the length of the draw tube, as well as the clamping device and the type of clamping cylinder. The reduction tube consists of a precision steel tube as support tube (1). In order to ensure optimum guidance, the rear (2) and the front (3) guide are adapted to the lathe. Mounting as well as dismounting can be done in a very short time with a few simple steps, as the reduction tube is only attached to the clamping cylinder with two screws. The POM bushings (4) can be flexibly adapted to the material diameter. Since you do not need to store a reduction tube for every diameter, you save valuable storage space. A Water pan extension (5) is also available as an option for safe covering and splash protection.

Heating bands are the ideal solution for the heating of tubes an cylinders. Mica band heaters, frequently used as nozzle heaters, are made with a plastic-tight stainless steel casing. Such mica heating bands are in many dimension available from stock. The Ceramic heating band type is suitable specially for applications with high watt density and therefore for higher temperatures. Ceramic band heaters, also known as ceramic ring heaters or cylindrical ceramic sectional heaters, are attached to the contact surface by means of a clamping mechanism. A preferred field of use for ceramic band heaters is the heating of plasticising cylinders, bushings and nozzles of injection moulding machines and screw barrels of extrusion machines. For thermal optimization and process control ceramic band heaters can also be offered with insulation jackets or air cooling.

Aluminium Oxide, Al2O3 is a major engineering material. It offers a combination of good mechanical properties and electrical properties leading to a wide range of applications. Alumina can be produced in a range of purities with additives designed to enhance properties. A wide variety of ceramic processing methods can be applied including machining or net shape forming to produce a wide variety of sizes and shapes of component. In addition it can be readily joined to metals or other ceramics using metallising and brazing techniques. Alumina based ceramics are by far the largest range of advanced ceramics made by INNOVACERA. Due to the important combination of properties, we have thoroughly researched the behaviour and characteristics of our Alumina products to give you the best possible component. Typical Alumina characteristics include: Good strength and stiffness Good hardness and wear resistance Good corrosion resistance Good thermal stability Excellent dielectric properties

We produce clear plastic cylinders (rounded boxes), different diameters and heights. The cylinders (tubes) in the image have 10 cm diameter. The height is on request. Other diameters we can produce are 3,7 cm; 4,5 cm; 6 cm; 8 cm; 10 cm; 12 cm; 12,7 cm; 15,7 cm; 16,5 cm; 20 cm. For others diameters please ask for quotation.

We produce clear plastic cylinders (rounded boxes), different diameters and heights. The cylinders (tubes) in the image have 6 cm diameter. The height is on request. Other diameters we can produce are 3,7 cm; 4,5 cm; 6 cm; 8 cm; 10 cm; 12 cm; 12,7 cm; 15,7 cm; 16,5 cm; 20 cm. For others diameters please ask for quotation.

We produce clear plastic cylinders (rounded boxes), different diameters and heights. The cylinders (tubes) in the image have 3,7cm and 4,5cm diameter. The height is on request. Other diameters we can produce are 3,7 cm; 4,5 cm; 6 cm; 8 cm; 10 cm; 12 cm; 12,7 cm; 15,7 cm; 16,5 cm; 20 cm. For others diameters please ask for quotation.

Look at this cylinder aluminum chubby lipstick tube with gorgeous tube design. The cylinder chubby lipstick case is decorated with a beautiful red aluminum layer which brings a fortunate and elegant vibe to the product. The chubby shape is cute and suitable for consumers of all ages. Moreover, customization including color, printing and hot stamping are optional. An iron component can be added to increase the tube weight and creates a better hand feel.

Check out this cylinder magnetic aluminum lipstick tube case. The rose golden aluminum lipstick component is exclusive in Rayuen lipstick tube series. It is delicate, modern and stylish. This lipstick tube is the perfect selection for global beauty and cosmetic brands. The installed magnetic function helps the consumers to close the tube after using it. Customized decorations such as color, printing, hot stamping, logo engraving and etc are optional. Also, an iron component can be added to increase the whole tube weight.

Manufacturer of spiral wound & convolute tube containers & packaging tubes with clean lines & decorating suitable for product packages, promotions & assortments. Features include flush or projection edges, super-white cosmetic grade interiors, convolute construction, flat or domed tops & covers of telescoping or shouldered design.

simple but chic style cylinder round tube, features at bottom filling, made by full recyclable plastic PP and ABS material, can be used as ideal packaging solutions for filling lip balm and lipstick, available for wholesale and custom packaging design for private brands.

Cylinder empty lipstick tube at rose gold. A rib decoration is added to the surface of the lipstick tube. The volume of the lipstick tubes is suitable for common lipstick product. More decorations are optional as requested. Also, customization is always available for our clients.

Cylinder tube made of PA6. Plastic parts for machine engineering, medicine and other sectors

ProArc provides plug-and-play longitudinal seam welding machine for tubes, cylinders, vacuum components, water tanks, cones, flat sheets, etc. Advantages 1. Servo motor drive carriage and double linear guide way provides great precision of 0.05mm accuracy (0.002”). Motion speed reach to 2-16,000mm/min (1~640ipm). 2. Mandrel adopts with our special design copper backing-bar and copper clamper to dissipate heat quickly. 3.Strong machine structure provides large working capacity from thickness 0.1 to 10mm 4. Smart control box, you can get started quicker than you think with it. 5. High accuracy motion for laser welding standard. Welding process: All weldable metals by TIG, MIG, Plasma, Submerged arc welding and laser welding. *CE conformity.