Complete assembly - Import export

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Core technology: Maintenance-free, mildew-proof,moisture-proof and anti-corrosion; mirror and tempered glass can be used for appearance, and integrated with natural scenery. Main Frame:   main frame assembly type, can be transported to the site in batches to complete assembly, efficient and fast; Wall System:   high-end matte fluorocarbon gray aluminium plate is used for exterior wall and roof, Connections:  seamless connection between wall and roof greatly improves the aesthetic feeling of the building, Interior decoration:  interior assembly of Elegant Angel white carving board and jute interior decoration, sound insulation and environmental protection; Flooring:  Residential system, floor with anti-skid wood grain fast-loading floor, Outdoor Area:  Outdoor terrace High-end plastic boards, The overall design of "art comes from nature" as the concept, making it a unique landscape in nature! Standard Size : 7200 * 3600 * 3850mm, 3000 * 2000mm (Attic area) Total : 32.㎡

When your needs go beyond simple miniature ball bearings to complete sub-assemblies, the professionals at WIB can help. Drawing on decades of experience in designing systems using a wide range of materials, we have the expertise to produce a sub-assembly that delivers optimum precision, performance, and life. During the process, we make sure our solutions fit perfectly into your production system.

Rolling Roof Bioclimatic System can adjust the shading on your terrace thanks to their fully automatic smart lamellas. It offers full protection from direct sunlight, allowing as much sunlight as desired and full opening options. It allows you to regulate the natural ambient temperature when opened, and to create a water-resistant, fully enclosed environment when fully closed. It is the ideal option for use in hotels, private homes, restaurants, bars and premium entertainment venues. It offers different variations according to your needs. Adaptable to the architecture of your existing space or self-supporting installation variations can be provided. Its special design, which provides ease of installation, allows its assembly to be completed in just one day. With its materials made of aluminum and stainless steel, it is resistant to the negativities of time for many years. Wind Load Resistance Test UNE-EN 13659: 2004 Class 6 // (approx. 112 km / h) not tested up

EDEN Retractable Bioclimatic Pergolas can adjust the shading on your terrace thanks to its fully automatic smart slats, when desired, it offers full protection from direct sunlight, allowing as much sunlight as desired and full opening options. It allows you to regulate the natural ambient temperature when opened and create a water-resistant environment when fully closed. It is the ideal choice for use in hotels, private homes, residences, restaurants, bars and world-class entertainment venues. It offers different variations according to your needs It can be adapted to the architecture of your existing space or independently self-supporting installation variations can be provided. Its special design that provides ease of installation allows the assembly to be completed in just one day. With its aluminum and stainless-steel material, it is resistant to the adversities of time for many years.

Custom machine for complete assembly of keys for locking systems

Seeder housing as a completely assembled assembly group - this is used in mechanical seeders for metering the seed or fertilizer.

Fully automatic assembly system for complete assembly of joints Automatic change-over between part types is handled by robotic solutions.

The clamping strength can be adjusted easily and quickly via the stable detent . The clamp is delivered completely pre-assembled.

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 50 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock.

With the Alumero end clamp 2.1 Click you have the universal end clamp for all modules with a frame height of 33 – 50 mm. The clamping strength can be adjusted easily and quickly via the stable detent. The clamp is delivered completely pre-assembled.

The compact steam superheaters of type series PVN reach high steam temperatures even at low process pressure. Due to the compact design and control concept, they are characterised by short response times, high control precision, and high availability (existing redundancies). In many cases, our steam superheaters are designed as a "stand alone" system and provided completely assembled with all necessary safety devices and controls. The customer must only provide the process connection and the electrical connection.

RK Easywork – workstation systems tailored individually to your production process Ergonomics and the optimum coordination of all workflows are key features of the height-adjustable RK Easywork workstation systems from RK Rose+Krieger. This protects the well-being of employees and increases productivity. The requirements of a manual workstation system are numerous, especially in the area of small and medium-sized series. As well as ergonomics, an optimum combination of manual, semi-automatic and fully automatic assembly and inspection procedures represents the biggest challenge when designing a user-friendly workstation. With the RK Easywork selection assistant, a complete assembly workstation can be configured online to meet ergonomic and task-specific requirements. BLOCAN® construction profiles made from aluminium and the electrically driven lifting columns offer a perfect combination for the creation of high-quality table concepts.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

HELLER uniPro 90 Machine tools manufactured by HELLER are used around the world in the machining sector. Many of the older processing centres are using the "uniPro 90" controller for which we offer completely reconditioning repairs across the entire product range. In addition we are selling new, replacement and exchange parts. We are also able to test these HELLER controllers on our internally developed test stand and guarantee full functionality following repair. By using original components for every repair, we can also offer you an 24month warranty* on the complete assembly. The product portfolio for the HELLER uniPro 90 product range currently consists of inputs and outputs, plugin cards from the ACPU90 range, control panels, system cards and power modules.

Features • Ideal for cellular concrete P2: just hammer in and tighten – quick and easy • Holds in almost all building materials • Metal tip enables high holding values • Directly usable due to preassembled screw Description & Area of Application • 3-way split spreader element with metal tip • Shaft with rotation locks • Wall plug is completely pre-assembled with galvanized countersunk screw with TX drive

Special mechanical engineering - unique, individual, tailored For the plant, machine and special machine engineering sector, we manufacture ■ custom-made components ■ casings and coverings ■ machinery racks ■ noise-protection cabins ■ complete assemblies Thanks to our vertical integration combined with a large material storages, we are realizing shortest throughput time for your projects on highest quality level. We serve numerous sectors like the rubber industrie, steel processing industry, automation technology, consumer goods industry, energy industry and any other branches where individual steel, stainles steel and aluminium components and assemblies are needed. Whether you want custom-made components or ready mounted and suface-finished overall systems, we do it for you!

With the complete assembly of assemblies, we offer you an all-round package: - We buy all the materials you need. - We straighten, staple and MIG MAG weld the individual steel construction components exactly according to your specifications and complete the components using high-precision CNC machining. - We assemble the finished, repeatedly tested components in our 2000 square meter assembly hall according to your construction plans into ready-to-install modules. - We check the final assembly down to the smallest detail. - We deliver the finished end product to you. Are you looking for a reliable service provider to implement your next project? We look forward to your inquiry.

Centre disc polyacetal. Hub aluminium. Note Clamping the hub with a grub screw is a costeffective alternative to the Oldhamtype couplings with radial clamping hub (23030). Short mounting times. The couplings can be mounted completely assembled or a plugin assembly is also possible. Take note of the tightening torque for the grub screw. To ease removal we recommend milling a flat on the shaft. Assembly The shaft to hub hole fit is a transition fit. The play should be min. 0.01 mm and max. 0.04 mm i.e. shaft Ø 6 f7 hub Ø 6 H8. Advantages robust plugin playfree short design On request Hub bores D1 and D2 with separate tolerance class or range.

Find our prefabricated studio or onebedroom houses that are perfect for creating a small, comfortable, and economical living space. Assembly time of 3 hours! Only 3 working hours will be needed to complete the assembly of steel structure, walls, and roof of a prefabricated studiotype house! The walls and roof are shipped precut. The system is completely bolted and no required any welding or cutting! The structure is in highly galvanized light steel. The interior and exterior precut walls are formed of a highly galvanized steel frame with a double surface of nonflammable class A1 fiber cement board. The walls are insulated with rock wool or polyurethane with a thickness of 80 or 100mm. Highly galvanized steel trusses and purlins form the double or single pan roof. The rainwater drainage pipe is made of PVC (or aluminium). We offer many choices of finishing materials floor covering, fitted kitchen, sanitary equipment. We also manufacture your studio

The brush cores are made of special reinforced polypropylene making them light, resistant to acids and alkalis and suitable for use in the food industry. The range of options is extensive. All in all we offer seven standard core diameters with three fill density variations each: low, medium, and high - making a total of twenty one standard cores to choose from. Almost all fill material qualities can be used. To assemble a complete roller brush is remarkably quick an easy as it does not involve any complicated mechanical connections, simply slide the brush segments on to the brush shaft and secure them in position with two locking collars. By standarding the sizes of our brush cores we are able to offer lower unit prices and faster delivery times. But the fact that our brush carrier sizes are standardised certainly does not mean that the choice we offer is limited. If required the standard internal bore diameter of the brush segments and locking collars can easily be reduced by...