Results for
B*BATI
Spain
Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.
Request for a quoteSEMIN
France
DESCRIPTION Coating to quickly fill all sizes of cracks, holes and grooves with no shrinkage and no cracking. COMPOSITION AND APPEARANCE Plaster-based powder filler, calcium carbonate, mineral reducer, cellulose derivatives and various admixtures. The compound obtained is white in colour. SUITABLE SURFACES All types of internal unfinished or painted surfaces : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, terracotta... TECHNICAL CHARACTERISTICS • pH: neutral • Setting time : 30 minutes depending on the ambient conditions and the thickness applied PACKAGING 5 kg and 15 kg bags. APPLICATION To be applied using a coating knife. Amount required : 1 kg m²/mm thickness. DRYING TIME Depends on the ambient conditions, the nature of the surface and the thickness of application. Generally speaking, when spread to a thickness of one cm, the filler dries in 6 hours.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.
Request for a quoteSEMIN
France
COMPOSITION AND APPEARANCE Plaster-based powder filler, special cements, calcium carbonate, resin, cellulose fibre and various admixtures. The compound obtained is white in colour. TECHNICAL CHARACTERISTICS • Setting time : 30 to 40 minutes • Hardening time : 1 to 2 hours. • Second coating : after 3 hours • Adherence : complies with NFT 30 608 SUITABLE SURFACES All types of interior surfaces complies with DTU 59.1 : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, ceramic, old paintwork, old painted fibreglass, floor tiles, wall tiles, etc. COVERINGS After the filler has completely dried, it can be covered using all types of paints, plaster-based coatings, paste coatings, wallpaper paste. PREPARATION OF SURFACES Surfaces must comply with standard DTU 59.1 and be clean, dry and free from dust and any trace of separating agent. Correctly open up, bevel and dust off the cracks.
Request for a quoteBIRMINGHAM INDUSTRIES (UK, INDIA)
United Kingdom
Oxidized starches are highly versatile and are widely applied in paper and board making processes: Shorter chain lengths of these starches help to improve whiteness of paper and reduces microbiological content. Can be used as a surface sizing agent as they improve printability, fibre lay, fold and tensile strength. Are available in different viscosity grades and may be used in a coating binder or base as they improve ink fixing and gloss, reduce picking and demonstrate controlled binder migration. They are the preferred thickener for applications requiring gels of low rigidity and have also shown to improve adhesion in batters and breading. Oxidized starch has also been used in the making of construction materials such as concrete blocks, gypsum board and fire-resistant wall- boards. Applications: 1.Paper production 2.Coating binder 3.Construction materials: concrete blocks, gypsum board. 4.Plywood adhesives 5.Colour pigment binder
BIRMINGHAM INDUSTRIES (UK, INDIA)
United Kingdom
Oxidized starches are highly versatile and are widely applied in paper and board making processes: Shorter chain lengths of these starches help to improve whiteness of paper and reduces microbiological content. Can be used as a surface sizing agent as they improve printability, fibre lay, fold and tensile strength. Are available in different viscosity grades and may be used in a coating binder or base as they improve ink fixing and gloss, reduce picking and demonstrate controlled binder migration. They are the preferred thickener for applications requiring gels of low rigidity and have also shown to improve adhesion in batters and breading. Oxidized starch has also been used in the making of construction materials such as concrete blocks, gypsum board and fire-resistant wall- boards. Applications: 1.Paper production 2.Coating binder 3.Construction materials: concrete blocks, gypsum board. 4.Plywood adhesives 5.Colour pigment binder
NAMTAS CONCRETE BLOCK MACHINES AND CONCRETE PRODUCTS
Turkey
YB-1220 represents a new high-tech type of movable egg-laying concrete block machines, produced by Namtas since the beginning of 1980-s. This machine features high throughput and robust easy-to-use design. The machine moves on wheels along straight line on flat even concrete surface according to the specified program while moulding hollow, solid or insulated wall blocks from 185 to 300 mm in height directly on the floor. Delivery of fresh concrete from batching plant to the machine is done by a forklift equipped with a special hopper attachment. YB-1220 does not require production pallets and product handling systems to operate, minimizing customer’s initial financial input and reducing production costs. YB-1220 can be equipped with expanded polystyrene adding unit, allowing it to produce insulated wall blocks.
NAMTAS CONCRETE BLOCK MACHINES AND CONCRETE PRODUCTS
Turkey
Namtas fully automatic batching plants are reliable and time-proven pieces of engineering being able to perform at their best in any conditions. They are designed specifically for the preparation of no-slump concrete mix (dry-mix concrete), which is required for the manufacturing of high-quality concrete products. Namtas batching plants can be installed together with Namtas concrete block machines or integrated into already functioning concrete block production plant.
NAMTAS CONCRETE BLOCK MACHINES AND CONCRETE PRODUCTS
Turkey
NS-30 and NS-25 are single-layer medium-pallet concrete block machines designed to manufacture high-quality concrete products, such as pavers, curbstones, hollow and solid wall blocks (including lightweight and insulated type), rain gutters and hardscape elements from 60 to 300 mm in height. The main difference between the machines is the size of vibration table, which is slightly bigger in NS-30. This increase machine’s production capacity for pavers and curbstones, as well as allows to produce 1 meter long curbstones lengthwise in the standing position. RIGID DURABLE FRAME AND PNEUMATIC MOULD BOX CLAMPING Both machines has a robust heavy-duty frame welded of rectangular steel tubes 150 x 150 mm. Mould and compaction head carriers are mounted on 4 80mm chrome-plated guiding columns. Mould is attached to the mould carrier via 4 airbags while compaction head is attached to the compaction head carrier via bolts.
NAMTAS CONCRETE BLOCK MACHINES AND CONCRETE PRODUCTS
Turkey
Being the best-selling model among all Namtas concrete products machines NS-36 combines durable and reliable design with high throughput and best price/performance ratio. These features contribute to the fast recouping of the capital invested in the machine. Equipped with fast mould changing device, NS-36 is capable of manufacturing a large variety of concrete products, such as paving stones, solid and hollow concrete blocks (including insulated type), filler blocks, curbstones, concrete gutters and hardscape units from 60 to 400 mm in height. HEAVY-DUTY SOLID FRAME Machine frame is a robust heavy-duty structure welded of rectangular steel tubes 150 x 200 mm. Reinforced hard-chromed guiding columns and supporting them linear bearings stabilize the mould and minimize its oscillation.
UMMANMAK
Turkey
In Skip Hoist Concrete batching plants, the aggregate is transported to the mixer by sliding on the rail with the help of skip hoist. UMMAN manufactures bucket concrete batching plants by using the most durable rope and rail structure as concrete batching plants. Emergency sensors are used against rope breaks. In any unfavorable situation, the skip hoist is stationary by locking the rail.The Automation Software Required for the Control of the Plant is Continuously Developed and Improved by the UMMAN Concrete Software Team, and the Customer's requests are answered in the best possible way.
Request for a quoteNAMTAS CONCRETE BLOCK MACHINES AND CONCRETE PRODUCTS
Turkey
Combination of company’s experience and modern technology is embodied in a new high-performance large pallet concrete products machine of NT series – NT-36. This machine represents the crowning achievement of a long and laborious work of Namtas’s engineers in collaboration with The Scientific and Technological Research Council of Turkey. Following years of research and tests this machine was successfully launched into production in 2015. This multi-purpose machine is designed to manufacture a large variety of concrete products including pavers, hollow blocks, filler blocks, curbstones, rain gutters and hardscape elements from 60 to 500 mm in height.
SYNERGY CONCRETE MACHINES
Turkey
Concrete block machine, slabs can produce concrete blocks between 6 cm and 38 cm in height and of each geometric shape, border, brick, cinder block, paving stones with the same Brick machine by changing the mold
UMMANMAK
Turkey
As Umman Beton, it is designed according to the principle of high durability, easy transportation, fast installation, long-lasting operation. HIGH QUALITY COMPONENTS In our concrete plants; We use the equipment of global brands that have proven their quality. The spare parts of the equipment we use are easily available in the markets, so you can continue your production with minimum interruption and long-term reliable operation.
Request for a quoteSCANDINAVIAN & UK MACHINES
Sweden
Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, and hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm) Block machines SUMAB are a guarantee of quality, durability and reliability. Block producing machine is produced on Scandinavian technology, using components from leading European manufacturers! Scandinavian quality at the best price!
Request for a quoteNAMTAS CONCRETE BLOCK MACHINES AND CONCRETE PRODUCTS
Turkey
NS-20 is the most compact automatic stationary concrete products machine Namtas manufactures. This reliable time-proven machine is made specifically for those investors and entrepreneurs, who want to start the production of the variety of concrete blocks with minimum financial input, while still being able to manufacture high-quality products, such as paving stones, curbstones, hollow and solid masonry blocks, filler blocks, rain gutters and hardscape elements from 60 to 200 mm in height. NS-20 is integrated in Type A concrete block production plants without automatic cuber. This means cured products should be transferred from production pallets to the transport pallets using manual labour.
NAMTAS CONCRETE BLOCK MACHINES AND CONCRETE PRODUCTS
Turkey
Combination of company’s experience and modern technology is embodied in a new high-performance large pallet concrete products machine of NT series – NT-42. This machine represents the crowning achievement of a long and laborious work of Namtas’s engineers in collaboration with The Scientific and Technological Research Council of Turkey. Following years of research and tests this machine was successfully launched into production in 2015. This multi-purpose machine is designed to manufacture a large variety of concrete products including pavers, hollow blocks, filler blocks, curbstones, rain gutters and hardscape elements from 60 to 500 mm in height.
Do you sell or make similar products?
Sign up to europages and have your products listed
SCANDINAVIAN & UK MACHINES
Sweden
Capacity – 1 concrete ring in 5-7 minutes. Technical description: Block height floor production: 500-1000 Useful height of machine: 1000 mm Production area: 1500 x 1500 mm Installed electrical power 25 kW Number of high-frequency vibrators: 6 pieces Machine weight with a mold and without a face mix device - 8750 kg Fully automatic model. "Scandinavian & UK Machines" provides full service in mobile and stationary batching plants; block, paving, curbs and wall panels producing equipment; cold asphalt plants; cement unloading equipment supply - consultations, projection, installation, specialists training, service, spare parts delivery.
Request for a quoteZIM MÜHENDISLIK CONCRETE MACHINES
Turkey
ZIM 1536 machine is a high-end machine designed for the production of concrete blocks, concrete paverstones and concrete curbstones. ZIM 1536 comes out with high-end hardware, wide options of production and low labor cost. It can be used in automatic facilities such as FINGER CAR, BASKET SYSTEM, L TYPE SYSTEM. Our machine that can produce 15 blocks or 36 paverstones in one press, is designed to produce 1200-1400 pallets per day. Aiming at maximum capacity with mass production, our machine is designed to work non-stop! Our machine, which can follow the mortar in machine with the loadcell system in the bunkers, takes you to the next level with the proportional mortar car movement, and reaches the maximum quality with the mold balancing and pressing system, is a pioneer in the sector with its many hardwares!
Request for a quoteZIM MÜHENDISLIK CONCRETE MACHINES
Turkey
Our ZIM 820 machine is a mid-entry machine designed for the production of double-layer paving stones. The ZIM 820 stands out with its low energy consumption, wide choice of production and high return on investment. It can be used manually, semi-automatically and fully automatically if requested. Our machine, which can produce 8 concrete blocks or 20 concrete paverstones in one press, is designed to produce 1000 pallets per day. To facilitate this production and increase quality; It has many features such as internal shaking system in the mortar cart, driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators.
Request for a quoteBESS MACHINE
Turkey
PRS-1000 semi-automatic hollow block machine is the biggest semi-automatic concrete block machine of Bess. This brick making machine can produce 1000 standard hollow blocks or concrete bricks in 8 hours. All Bess hollow block machines are PLC controlled and very reliable with 2 years of guarantee.
Request for a quoteResults for
Coatings for concrete blocks - Import exportNumber of results
23 Products