Cleaning methods - Import export

Once your cleaning programme has been developed, we will select the right cleaners for you. All our employees have a keen eye for detail and receive continuous theoretical and on-the-job training in cleanroom behaviour and the latest cleaning methods. The employees chosen to clean your cleanroom will receive specific training to understand and respect your procedures. You can expect specialised and highly qualified professionals!

Features Flat spray nozzles for detergent spraying. Generates large amounts of foam, air suction is driven only by liquid pressure. No compressor is necessary. Cleaning effect is improved due to the long residence time of the foam. *Spray angle of 80° – 100° is for reference only, measured when spraying 100 times diluted commercial dishwasher detergent. Applications Washing outer surface of vehicles Cleaning of conveyors in food industry

To develop a cleaning solution that meets the specifications, PERO engineers identify the best wet cleaning method and devise the sequence of the process steps as well as the process parameters. The effectiveness and efficiency of the chosen process is then verified by test runs performed at the PERO Centre of Competence.

This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.

- Product name: Air Doctor air purifier - Model name: AC-10 - Manufacturer: APC TECH CO., Ltd / Korea - Air Cleaning Method : Axial Photocatalyst air cleaning technology - Color : Grey ,Red, Yeollow , Black - Size : 185mm*120mm - Weight: 0.95kg - Area for exclusive use: 3sq~5sq - Installation type : Stand type - uv lamp life : about 50000hours - Main Components : Axial Photocatalytic Reactor , composite filter (carbon+hepa) - Power consumtion: 3W - Operational Voltage: DC5V - Small air purifier / 0.92kg - Excellent performance by photoluminescent photocatalytic reactor (Patent No.10-09565105) - Patent (Small air purifier) / Patent No.10-1781119 - USB Port / Portable battery available

WIWOX® DP-BB blast cabinets with combined blasting and blow-off function (Blast´n´blow®) and ex-protection accord. to 1999/92/EC for paint stripping and surface decoating in seconds. Fine organic blasting media get shot onto the workpiece by compressed air, whereby even stubborn thick layers are loosened in shortest time by the effect of the soft, but sharp-edged granulates. Even sensitive tool surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.

High performance injectable epoxy chemical anchor approved for daily anchoring work and sprout connections in concrete Main materials: Concrete (cracked), Concrete (uncracked) Main material condition: Wet, Dry, Underwater, Flooded Approvals / test reports: ETA Features High performance in cracked and non-cracked concrete Suitable for use in indoor and outdoor applications, as well as in a wide range of base material conditions (dry, wet, flooded) (depending on rod specifications and approvals) Long operating time provides greater flexibility in installation A wide range of accessories are available (plug pistons, steel brushes, rechargeable application guns) Easy cleaning method simplifies installation

The tunnel-type hot water and multi-purpose washing, rinsing, drying and lubricating system is an effective cleaning and treatment method of ten used on a large scale in industrial production processes. This system is located inside a tunnel where materials move automatically on a convey or belt.

TRU Cleanroom Cleaning has extensive in-house expertise. Our starting point for cleaning your cleanroom is a well-thought-out and expertly substantiated cleaning and disinfection programme. We develop this programme based on a thorough analysis of the cleanroom class, the contaminants present, and the flow of materials and personnel, among other things. Your cleaning and disinfection programme includes the responsibilities, the cleaning tasks and cleaning frequency, the materials and cleaning agents, and the cleaning methods used. Each cleaning is accurately documented on paper or in a digital system that meets the requirements of 21 CRF Part 11, Annex 11.

Ditch the old-school method of cleaning parts and switch to Laborex immersion parts washers! Our washers provide a comprehensive solution for cleaning, degreasing, rinsing, phosphate treatment, passivation, oiling, paint stripping, and drying of both metal and plastic parts - all in a closed cabin. Our immersion process involves both cold and warm immersion, and we offer the added option of brushing, spraying, or blowing the parts dry. This ensures that your parts are not only perfectly clean, but also dry and ready for use in no time. Say goodbye to the hassle of manual cleaning and hello to the convenience and efficiency of Laborex immersion parts washers.

Features Flat spray pneumatic nozzle producing semi-fine (and semi-coarse) atomization having a mean droplet diameter of 50μm or more. (*3) High spray impact with thin flat spray pattern and uniform distribution. Liquid pressure type under the liquid pressures of 0.2–0.5 MPa (ca. 2 bar – 5 bar). Large turn-down ratio with stable spray angle. Spray angle of 60° or 80° *1) Measured at compressed air pressure of 0.4 MPa (ca. 4 bar) and liquid pressure of 0.5 MPa (ca. 5 bar). *2) Free passage diameter of nozzle orifice. *3) Measured by Laser Doppler Method. Applications Cleaning: Printed circuit boards, liquid crystal, liquid crystal display, steel plates [Steel making industry] Surface finish process: Precision cleaning for steel surface treatment, Roll cleaning

KLN manufactures various cleaning machines acc. to ATEX (ATmosphère EXplosibles) for the use of combustible liquids. The cleaning machines can be used separately or in combination with other methods. The cleaning tanks must be operated at a well ventilated place. The combustible cleaning agent can be filled in directly into the tanks. The ultrasonic generators are set up separately. A safety thermostat (setting 15°C below the flash point) controls the adherence to a max. temperature and in case of excess temperature it switches the machine off. The cover included in the delivery avoids emissions from the tank during standstills. The machines can also be used in connection with aqueous cleaning methods. Options: • heating • extraction • cooling tube • ultrasonic frequencies 30 and/or 40 kHz • automation system • product carrier

For all cleaning methods, operators must comply with the applicable statutory regulations at local, national and international level. The handling and the treatment of the cleaning media are two important aspects that must be taken into account when assessing cleaning tasks and suitable methods.

PERO Centre of Competence in Königsbrunn in a dedicated area measuring 1,100 m², there are more than 15 separate units available for parts cleaning tests. PERO Centre of Competence in Königsbrunn in a dedicated area measuring 1,100 m², there are more than 15 separate units available for parts cleaning tests. In manufacturing plants, parts cleaning is one of the key activities along the production line. The productivity of a manufacturing plant is determined by the availability of the cleaning technology. At the PERO Centre of Competence, PERO specialists work together with operators to develop the cleaning method that best suits their needs.

The TWT combines a number of cleaning methods in a single unit. Through immersion any spray cleaning with alkaline, neutral or slightly acidic aqueous media, it caters for a wide range of parts and meets even the most stringent requirements regarding technical cleanliness. The cleaned parts are dried under vacuum for extra fast processing. All machine components that come into contact with media are made in stainless steel, allowing for the use of fresh and demineralised water.

The PowerJet series with single or double jet is particularly suitable for cleaning water-bearing pipes and ducts. The increase in working performance with low energy input is due to the novel implementation of the available performance variables such as pressure and volume flow. Even with a volume flow of 280 l/min. and 130 bar, large quantities of loose material (stones, sand, sludge and paper/cellulose) can be transported efficiently. This cleaning method also makes it easy to maintain and preserve old sewer systems (the latter is in line with municipal requirements). Any industrial water can be used to drive the system. The use with water recovery is problem-free.

lanched walnut (Blanche) is a fairly new product both in our product line and on the market. This type of walnut is a peeled (blanched) kernel that acquires a beautiful light shade. Since blached walnuts lack the top skin, they have a more pleasant taste, and there is no garchinka in them. In our blanching process, we use the "delicate cleaning" method, which allows you to whiten it as accurately and safely as possible for the quality of the walnut. Such a product is widely used in the confectionery and food industry due to its softer and more pleasant taste. Also, after the blanching process, the peeled walnut acquires a number of useful properties:

The DIGI BACK CLEANING KIT “PELI EDITION” bestehend aus: 1 Stk. Original PELI Case # 1150 with adapted interior for the items 1x G-2051 Air Power Hi-TECH PRO 400 ml 1x V-2100 Top Ventil with Anti Static Adapter 10x T-1010 Silky Wipe – 10cm x 10cm, individually welded 1x Green Clean Digital Capture Back Cleaning Liquid 15 ml The system offers a two part cleaning process to remove all types of dust, dirt and contamination: Part ONE: Contact-Free removal of dust and loose particles with anti-static effect. Part TWO: Safe removal of dirt and smudges with a specially formulated cleaning fluid and „Silky Wipe“ cloth. All digital capture sensors (CCD & CMOS) have sensitive surfaces which are best left un-touched and contact-free cleaning methods are best! Sensors have a current going through them when in use and that creates a static charge that attracts dust, fluff and abrasions. These are all easily removed by using STEP ONE of the ANTISTATIC SET: The basis for this is the Air Power...

Digi Back Cleaning Kit contains: 1x G-2051 Air Power Hi-TECH PRO 400 ml 1x V-2100 Top Ventil with Anti Static Adapter 10x T-1010 Silky Wipe – 10cm x 10cm, individually welded 1x Green Clean Digital Capture Back Cleaning Liquid 15 ml The system offers a two part cleaning process to remove all types of dust, dirt and contamination: Part ONE: Contact-Free removal of dust and loose particles with anti-static effect. Part TWO: Safe removal of dirt and smudges with a specially formulated cleaning fluid and „Silky Wipe“ cloth. All digital capture sensors (CCD & CMOS) have sensitive surfaces which are best left un-touched and contact-free cleaning methods are best! Sensors have a current going through them when in use and that creates a static charge that attracts dust, fluff and abrasions. These are all easily removed by using STEP ONE of the ANTISTATIC SET: The basis for this is the Air Power HI-TECH PRO 400ml aerosol can, fitted with a high quality „Top Ventil“ discharge valve and...

• INCIA Natural Olive Oil Soap for Sensitive Skin is produced with all-natural plant ingredients and organic methods. • It cleans and moisturizes your hands without damaging the natural fl ora of your skin. • With its rich natural content, Olive oil provides the attentive care that sensitive skin needs, as well as soothing effect on skin with low tolerance.