Clamping jaws - Import export

The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops. The wedge has a slightly elongated hole allowing for movement to compensate for tolerances. Spread width: M8 = ±0.5 mm M10 = ±1.0 mm M12 = ±1.0 mm M16 = ±1.5 mm Drawing reference: D) DIN 6912 cap screw 1) Jaw face smooth 2) Jaw face serrated 3) Wedge clamps 4) Workpiece 5) Fixed stop

Copier Machinery manufactures compact, versatile, and easy to install modular concept clamping devices. They clamp the workpiece concentric with high precision and high repeatability. The clamping process is faster and with constant pressure with Copier’s clamping devices. Special jaw sets are used depending on the workpiece diameter, size, and shape to assure proper clamping of the workpiece. The clamping devices distinguish itself in outstanding reliability and are designed for the roughest production procedures. Copier’s clamping devices are easy to integrate into manufacturing lines and are available in manual, pneumatic, and hydraulic versions. Diameters vary from 5 mm up to 410 mm (0.2" – 16").

clamping force 7,5 kN, retention force 10 kN pendulum range ± 4 mm, hose at the side max. 250 bar, as per data sheet B1.733

clamping force 7,5 kN, retention force 10 kN pendulum range ± 4 mm, hose at the back max. 250 bar, as per data sheet B1.733

Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced. Form B: Fasten the floating clamp with M6 fastening holes to a fixture. Adjust the height stop and pivot range using the blue adjusting sleeve and clamp with grub screws (4x AF 2.5). When setting the height limit, allow ample play at the top. For specific clamping situations, the standard jaw plates can be modified or replaced.

The pneumatic hold-down clamp is suitable for clamping workpieces from above. This clamp is operated with standard pressure compressed air. The large swivel angle of the clamping arm makes it easy to insert and remove the workpieces without any obstructions, guaranteeing optimum accessibility to the workpiece. The block design of the housing offers universal fastening possibilities, which means that the clamp can be optimally adapted to the workpiece being clamped. Self-aligning pads with a smooth or serrated faces can be fitted in the clamping arm, enabling rough or machined workpieces to be clamped. These pneumatic clamps can be placed in multiple positions on the workpiece and operated in any particular order. They can be controlled manually or automatically. As these clamps are pneumatically actuated, they relieve the operator, particularly where frequent clamping processes are carried out.

Housing and arm carbon steel. Jaw tool steel. Version: Housing, black oxidised. Arm and jaw tempered and black oxidised.

Tightening the ball-end thrust screw moves the jaw plates forwards. The workpiece is pushed against the fixed stop and simultaneously forced down onto the seating face. The seating face for the workpiece can be mounted directly on the machine table.

We recommend using a lubricating paste to reduce wear to the adjustment screw. Risers are available to increase the height of the power clamp. Supplied with clamping element, support element, DIN 508 slot key and grade 12.9 bolt. Application: The height of the clamping arm can be infinitely adjusted using the adjustment screw and the workpiece can then be clamped. Advantages: Very high retaining forces of 22–49 kN. Low height. Simple element assembly. Enables very fast, simple clamping. Infinitely adjustable height and length. Use in 12-28 mm T-slots or M10, M12, M16, M20 grid systems. Thrust pad available in smooth and serrated versions.

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.

Locking pliers are a type of hand tool that have various models based on their jaw design. Chain Clamp Locking Pliers are best to use for holding and locking around any shape or size. The chain of these pliers plays the role of the jaw and is ideal for awkward shape pieces. With dimensions of 10 inches, Ronix RH-1442 Chain Clamp Locking Pliers can handle many projects that include loosening, tightening, and holding different pieces. Its advanced design improves the performance and convenience of the projects. RH-1442 has a chain length of 500mm and is made of high-quality steel A3 alloy for the highest resistance during industrial applications.

clamping force 7 kN, retention force 4 kN stroke 6 mm per clamping jaw max. 250 bar, as per data sheet B1.732

PORTABLE CONSTANT HEAT SEALER – SUPER CELLO ( for multi-layer bags) T Clamp sealers suitable for the sealing of large packaging in barrier material (polypropylene, laminated paper and aluminum) and polyethylene. Thanks to the power cable of 4.5 meters you can move easily around the product to be packaged. The clamp sealer performs a dual hot jaws over a length of 42 cm. The sealers are repeatable, one beside the other, without length limits. The temperature of the sealing bars is adjustable from 60 ° C to 250 ° C by a thermoregulator positioned on the caliper. The longitudinally knurled bars and coated with an anti-adhesive treatment are also suitable for welding polypropylene.

NSPV Waterproof cable gland for corrugated pipe Product material part is made of UL-approved Halogen-free PA66 (Flame calss UL94-V-2),B and D is made of EPDM weathering rubber. Features: Special clamping jaw and clamping ring design,large clamping cable range,strong tensile strength,waterproof,dustproof,salt resistant,weak acid,alcohol,oil,grease and general solvent.

NSPV M25AL Waterproof and breathable connector plain screwed adaptor Product material part is made of UL-approved nylon PA66 (Flame calss UL94-V-2),B and D is made of EPDM weathering rubber. Features: Special clamping jaw and clamping ring design,large clamping cable range,strong tensile strength,waterproof,dustproof,salt resistant,weak acid,alcohol,oil,grease and general solvent.

Quick click-shut coupling (QuickLock) without threads, no lubrication or elaborate screwing required Fast rod insertion and removal Approximately 40 % quicker installation than screwed rods Absolute stable connection Works around offset pipe bends and joints Minimal deformations Made from one piece of steel Rigid, low wear, as no clamping jaws required No slipping back of the bursting rods due to elastic pulling forces Bursting rod system with practical bursting rod accessories

The AutoSAM 3.26 is an automatic bar feeder with hydrodynamic bar guidance. It is particularly suitable for connection to sliding headstock lathes (Swiss-Type). Its field of application is in small, medium and large series. Its big brother is the bar loading magazine AutoSAM 3.51. The bar feeder has a calibration-free material clamping which is carried out by collets. This saves time for material change due to the automatic centric positioning. Four clamping jaws ensure maximum hold while the collet is being pulled onto the bar. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura, CMZ, Takamaz and many more.

Grippers and inserts are ideal for use in clamping arms, gripping systems, clamping fixtures, clamping jaws and self-aligning pads. The use of grippers allows the transfer of very high torque values and above average grip, even with hard materials and surface irregularities. Form O: The abrasive diamond surface is bonded firmly to the base. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads.

Reliable with low wear. On the HONSEL BZ 143A, the clamping jaws are specially adapted to the trapezoidal grooves of the rivet mandrel. In combination with the modified clamping mechanism, this guarantees secure and positive setting of FERO® BULB high-strength blind rivets (or comparable types) with mandrel diameters from 3.8 to 6.15/6.5 mm! Wear of the clamping jaws is minimised!

Reliable with low wear. On the HONSEL BZ 143A, the clamping jaws are specially adapted to the trapezoidal grooves of the rivet mandrel. In combination with the modified clamping mechanism, this guarantees secure and positive setting of FERO® BULB high-strength blind rivets (or comparable types) with mandrel diameters from 3.8 to 6.15/6.5 mm! Wear of the clamping jaws is minimised!

The HONSEL Rivdom eBZ 3 battery riveter was developed specially for the demands of the setting of high-strength blind rivets with 6.4 and 7.8 mm diameter with grooved rivet stud! The clamping jaws specially designed for this geometry and a modified clamping mechanism guarantee reliable and positive settings of high-strength blind rivets with a stud diameter from 3.8 to 6.15 mm. This also helps to minimise wear on the clamping jaws. Rivdom eBZ 3 has a modern brushless DC (BLDC) motor. Ergonomy and comfort: Quick-release mechanism: No more than one open-jaw wrench for maintenance! Individual return mode setting: When using manual return mode, the trigger has to remain pressed until the rivet is sheared. When the trigger is released, the tool moves back to the front starting position. In addition Rivdom eBZ tools offer an automatic return mode. L-Boxx: Sturdy and flexible. High-quality RivdomPLUS battery system Extended 24-month manufacturer's warranty.

FEATURES Aluminium table with special alloy, steel sheet bed, resistant and durable electrostatic paint. Disc protection. Manual cutting and feed system. Left to right cutting characteristic at standard degrees: 15º – 22.5º – 30º – 45º – 90º and free cutting at various angles. Band cabin to isolate vibrations. Pneumatic clamping jaws. Automatic lubrication system. Disc Ø 400 mm. Service key Lubrication system

The CLAMPING JAW cable gland made of nickel-plated brass is the cable entry solution for applications where increased anchorage is required. Features: - increased centrical anchorage - for cables from 5,5 to 45 mm - temperature range -30 °C / +100 °C - Protection grade IP54 - with metric or Pg-thread

Type 3-201 to 3-212 shaft cable clamps made of stainless steel are used to mount cables in mine shafts, and they have been designed for application in both non-methane and methane fields of underground mining facilities. A prerequisite of correct operation of self-locking clamps is the appropriate clamp choice depending on the cable diameter as well as proper setting of the cable clamping jaws. Type 3-201 to 3-212 clamps are available in an option enabling shaft bracket mounting.

A precise 90° saw cut is a basic requirement for orbital weld preparation. Robust saws for all wall thicknesses Powerful drive motor Uniform and easy feed control by means of handwheel Different chamfering blades mountable Right-angled saw cut 4, 5 or 6 clamping jaws made of stainless steel as well as reducing jaws Due to concentric clamping no deformation with thin-walled pipes Also for cutting off pipe bends Quick-release fastener for easy changing of saw blades Chip removal during cutting by means of integrated brush Convenient adjustment of plunge depth by means of feed wheel Technical Data: Size range in mm: OD 6 – 220mm Size range in inch: 0.236″ – 8.661″ Wall thickness: 1 – 8mm Electric drive: Single-phase AC motor Mains voltage (input): 200/220VAC (50/60Hz) Power: 1000W / 4.5A Protection class: II Speed control: 6-step control Weight: 47 - 77kg Package includes: Tube saw with electric drive One saw blade One bottle of saw blade lubricating oil

This equipment now permits fittings up to 3“ to be inserted or extracted. Due to its innovative rapid tool sled, the insertion of 90 degree, 45 degree or straight fittings without changing tools is now simple and quick. Ergonomic Freely positional foot pedal for clamping hose saves time and increases productivity Lifting eyes for easy positioning of the machine Simple to use Universal hose clamping jaws for all hose diameters without the need for changeover eliminates lengthy setup times Axially adjustable clamping unit for all diameters prevents kinking of thin hoses and for efficient operation Individual clamping force adjustment for damage-free clamping avoiding scrap Zero maintenance and wear contributes to cost savings Rapid sled for inserting curved and straight fittings without time-consuming exchange of fork sets saves time Safety compliant Moving components have safety guarding CE-compliant, robust UNIFLEX quality

The type SFO-F tube forming machine facilitates the economical and most reliable production of tube ends made of steel, stainless steel and other materials with a contour typical for the STAUFF Form tube forming system. The machine is designed as a robust table-top device for continuous operation in the workshop. It is used in connection with FI-FST tube shapers and FI-FB clamping jaws. Tube shapers with FI-ID internal tube supports are used with selected tube dimensions, which prevent the tube from being constricted in the shaping area. Tube shapers, clamping jaws and internal tube supports have been specifically designed for the mechanical forming process and can be quickly and simply replaced without the need for any tools, if required. The resulting short tool change and set-up times contribute to the high efficiency of the system as well as ensuring low cycle times. All the tools needed for the forming process are clearly labelled with the tube dimensions so that assembly...

The unique friction welding machine RS02 is the professional tool for the maintenance operator and also the fastest and most reliable way of welding belt profiles. Constantly good quality connections are produced in a few seconds with repeatable accuracy due to fixed welding parameters. Welding clamping jaws tuned to the respective profile ensure reliable clamping and perfect alignment of the profile. Thanks to its handy type of construction, the friction welding machine can even be used in narrow space conditions for comfortable welding. The ­recently developed battery version is now available to ensure unlimited freedom of motion.

Designed to be used as lockable filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBL-C (Clamping version) ▪ SMBL-P (Screw-in version) ▪ SMBL-P (Push-on version) Features ▪ Available as clamping version (with 3 clamping jaws), as threaded version (with female BSP thread) or push-on version, suitable for stand pipe mounting with pipe diameters up to 77,5 mm / 3.05 in (secured by 3 locking screws) ▪ Key-lockable cap (2 keys included) ▪ Lock protected by rotating flap ▪ Air flow in both directions, one direction only or no direction Materials ▪ Breather cap made of Aluminium, lacquered (light-grey, RAL 9022) ▪ Breather body made of Aluminium, zinc-plated ▪ Basket made of Steel, zinc-plated or Polypropylene (PP) ▪ Sealings made of NBR (Buna-N®) (standard option); FPM (Viton®) sealed version available Technical Data ▪ Operating temperature range: -30 °C ... +100 °C / -22 °F ......