Results for
XIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Product Specification Application: Mainly applied to the electronic soldering iron Voltage: 110VAC Heating Resistance: 37Ω±15% Dimension: L80*φ5.0mm Electrode: Welding 2 nickel wires on the surface
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V / 230V Power: 150W / 170W / 200W / 230W Tube Size: OD10.5 × ID6.5 × L78 mm Supporting Socket: NO.7 Lead wire: 300mm / 400mm / 500mm / 900mm (Customized is accept) Range of temperature: 800~1100 °C Applications: Kerosene fan heater Wood pellet, wood chips stove or boiler Small scale biomass industrial furnace ignition Incense burner
Request for a quoteUDEN-UKRAINE
Ukraine
Fireplaces (Ceramic-granite stoneware heaters are a unique combination of energy-efficient heating and original design. They go beyond the concept of heating devices: they have non-standard sizes, shapes, textures, and appearance, which will become a real decoration of any interior and emphasize the unique style of its owner)
Request for a quoteUDEN-UKRAINE
Ukraine
Ceramic-granite heater KEN-900 "Cosmos jacquard" aquamarine (Ceramic- granite design heaters of the ART collection are a refined artistic line embodied in the author's artistic painting, which will not leave indifferent connoisseurs of inspired and sensual images)
Request for a quoteATADENIZ RADIANT HEATING SOLUTIONS
Turkey
6 different power types. Compatible for factories, workshops, gyms, cafes, restaurant, chicken farms, indoor swimming pools, it can be used in all large-volume spaces such as hangars, meeting rooms and warehouses. It is remote controlled and modulated with 3 heat stages. Provide heat comfort and energy savings assists. 6 different thermal power values are produced in 2 different models, including L and U type. Using engineering, the preferred reflectors and angles allow heat to spread to the maximum area. Compatible with LPG,LNG and Natural Gas. Safe gas valve system is used in our devices
Request for a quoteATADENIZ RADIANT HEATING SOLUTIONS
Turkey
These heaters are also designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It has an appealing design with a cylinder shape. It can be operated by LPG, LNG and Natural Gas. It has an efficieny value that could make an intensive heat transfer. There is a safe gas valve system in all our products.
Request for a quoteATADENIZ RADIANT HEATING SOLUTIONS
Turkey
These are designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It transfers the heat intensively to needed spaces by the support of sheet metals around the seramic plates It can be operated by LPG, LNG and Natural Gas. It has a 72% efficieny value that could shorten payback time and supply customer satisfaction There is a safe gas valve system in all our products.
Request for a quoteATADENIZ RADIANT HEATING SOLUTIONS
Turkey
These are designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes . 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It has an appealing design covered by black glass that is translucent during heating process. It can be operated by LPG, LNG and Natural Gas. It has a 1200 temperature heat resistant glass that could make a intensive heat transfer. There is a safe gas valve system in all our products.
Request for a quoteFRIEDR. FREEK GMBH
Germany
Heating bands are the ideal solution for the heating of tubes an cylinders. Mica band heaters, frequently used as nozzle heaters, are made with a plastic-tight stainless steel casing. Such mica heating bands are in many dimension available from stock. The Ceramic heating band type is suitable specially for applications with high watt density and therefore for higher temperatures. Ceramic band heaters, also known as ceramic ring heaters or cylindrical ceramic sectional heaters, are attached to the contact surface by means of a clamping mechanism. A preferred field of use for ceramic band heaters is the heating of plasticising cylinders, bushings and nozzles of injection moulding machines and screw barrels of extrusion machines. For thermal optimization and process control ceramic band heaters can also be offered with insulation jackets or air cooling.
Request for a quoteFRIEDR. FREEK GMBH
Germany
Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Alumina Ceramic Heaters are produced by implementing unique metallization and ceramic lamination processes. Due to the advanced manufacturing techniques utilized in the electric element, Alumina Heaters can provide higher reliability than ever before. Currently, applications include use as innovative types of heaters in the automotive, medical and semiconductor industries.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Product Specification: Application: Used for 936 soldering station Voltage: 24VAC Heating Resistance: 3.0±0.3Ω (23℃±2℃) Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Product Specification Application: Mainly applied to the electronic soldering iron Voltage: 110VAC Heating Resistance: 310Ω±10% Dimension: L60*φ3.8mm Electrode: Welding 2 nickel wires on the surface
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater for Automobile / Oxygen Sensor
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater for Automobile / Oxygen Senser
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Ceramic Heater for Soldering iron & Station: Alumina Ceramic Heaters are produced by implementing unique metallization and ceramic lamination processes. Due to the advanced manufacturing techniques utilized in the electric element, Alumina Heaters can provide higher reliability than ever before.Currently, applications include use as innovative types of heaters in the automotive, medical and semiconductor industries. a.Based material: white alumina ceramic, and the content of alumina is no less than 95%.The tungsten slurry is printed on the ceramic tape, laminated by hot pressing, and thensintered under the protection of a hydrogen atmosphere at 1650 ° C b.Ni-wires:N6 Ni-wires with 0.6mm diameter c.Brazing material: siliver-copper braging alloy Application: We are producing High Quality 24V 110V 220V Heating Element for Soldering Station with the advantages of energy-efficient,long lifetime,high insulation,super fast heatin up and eco-friendly.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Planar ceramic heater oxygen sensors are subject to extreme conditions. A properly functioning oxygen sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values. Oxygen sensors with planar ceramic heater characteristics: ● Quick ignition time ● Good insulation performance ● Strong resistance to high temperature and poisoning ● Long lifetime ● Pump current switch type, conventional switch type, air-fuel ration type, and wide range type are available Appliaction: Plate Ceramic Heater Chip for Automobile / Oxygen Sensor
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FRIEDR. FREEK GMBH
Germany
There are three main types of infrared emitters. They are classified according to emitted wave lengths. Which emitter type is the best for your application depends on many factors. For most applications an optimum match of emitted wave length and absorption of the target material is desirable. This means a highly efficient transfer of radiation energy in the material and thus a very quick heating. However, there are exceptions to the rule. At very high required energy densities, cyclical processes, transparent, thin or low-conductive materials it might be necessary under certain circumstances to deliberately use emitters whose characteristics deviate radically from the absorption characteristics of the material to be processed. Finally, in many applications, including thermoforming, all three basic emitter types are successfully used – long wave ceramic emitters, medium wave quartz emitters and short wave halogen emitters.
Request for a quoteTROTEC GMBH
Germany
CERAMIC FAN HEATER TDS 10 MQuick, effective and draught-free warmth without burning dust The small ceramic fan heater is not only the ideal heating solution for allergy-sufferers to be used in living and work spaces. For, generally speaking, electric heaters are excellently suited for use in closed interior spaces, as they neither consume oxygen nor produce any combustion gases. The ceramic fan heater TDS 10 M still outweighs this commonly known advantage of electric heaters, for it is equipped with a PTC ceramic heating element instead of heating wires. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.
Request for a quoteTROTEC GMBH
Germany
Being a powerful rapid heater, the compact TDS 20 M is ideally suited for quickly heating cold rooms in the time between seasons or on particularly cold days. Whether for use in a workshop, in living or working spaces – the combination of robust workmanship and discreet design leaves a good impression in every environment. And the thermally insulated carrying handle makes it easy to transport the device from one site of application to the next. Instead of heating wire technology, the TDS 20 M uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.
Request for a quoteTROTEC GMBH
Germany
Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 50 M. For more targeted warmth, the heating capacity can be increased in two stages up to 9 kW. If required, the fan can also be used in sole fan operation without heating function. The TDS 50 M is powered by three-phase current, which is, however, not supplied to a conventional heating coil but to a durable PTC ceramic heating element integrated in this electric heater. In direct comparison, this does not only entail a more homogenous hot air current and a lower noise generation – the ceramic PTC heater battery also offers many additional assets.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V/230V Power: 160 W, 180 W, 210 W, 225 W, 230 W, 240 W, 255 W Tube Size: OD10.5 × ID6.5 × L90 mm Supporting Socket: NO.4/NO.5/NO.6/NO.29 Lead wire: 300mm/400mm/500mm/900mm (Customized is accept) Range of temperature: 800~1100 °C Ceramic igniter technology benefits: A fraction of the energy consumption compared to conventional cartridge or element heater. Long-lasting (non-aging). Time to ignition 60~90 seconds. Tested to 100,000 cycles. Easy to install and retrofit. 800~1100°C at steady-state temperature. Impervious to oxidation and corrosion.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Pyrolytic boron nitride is a grade of hexagonal boron nitride. It is produced by the chemical vapor deposition process to create its solid body and all the boron nitride crystals grow parallel to the surface on which the vapor is deposited.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Product Specification Usage: Mainly applied to model 933 electronic soldering iron Voltage: 220VAC Heating Resistance: 140Ω±10% Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V / 230V Power: 300W / 350W Tube Size: OD11.5 × ID6.5 × L108 mm Supporting Socket: NO.43 Lead wire: 300mm / 400mm / 500mm / 900mm (Customized is accept) Range of temperature: 800~1100 °C Applications: Kerosene fan heater Wood pellet, wood chips stove or boiler Small scale biomass industrial furnace ignition Incense burner
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
INNOVACERA Alumina Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy needed by hot air fans and ignition blowers.Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Alumina Ceramic Heater Specification: > Voltage: 120V/230V > Power: 160W, 180W, 210W, 225W, 230W, 240W, 255W > Tube Size: OD10.5 × ID6.5 × L90 mm > Supporting Socket: NO.4/NO.5/NO.6/NO.29 > Lead wire: 300mm/400mm/500mm/900mm (Customized is accept) > Range of temperature: 800~1100 °C Ceramic igniter technology benefits: * A fraction of the energy consumption compared to element heater. * Long-lasting (non-aging). * Time to ignition 60~90 seconds. * Tested to 100,000 cycles. * Easy to install and retrofit. * 800~1100°C at steady-state temperature. * Impervious to oxidation and corrosion.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Innovacera Ceramic Oxygen Sensor Heater is suitable for use in Bosch, Denso, Delphi, NTK & NGK Oxygen Lambda Sensor, Oxygen sensors are designed to monitor the amount of oxygen that’s in the car’s exhaust stream, while ceramic heater plays an important role in the O2 sensor.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Electric 12V 13V Alumina Ceramic Heating Element Heater Rod for Oxygen Sensor Advantages Ceramic Heater for Oxygen senster is used for heating oxygen sensors that detect the exhaust gas of vehicles and is equipped to most of automobile gasoline engines. Because the temperature can be rapidly raised, it is possible to activate the sensor immediately after the engine start which provides useful feedback to reduce emissions. 1.Based material: a.white alumina ceramic b.the content of alumina is no less than 95%. c.the tungsten slurry is printed on the ceramic tape, laminated by hot pressing, and thensintered under the protection of a hydrogen atmosphere at 1650 ° C 2.Ni-wires:N6 Ni-wires with 0.6mm diameter 3.Brazing material: siliver-copper braging alloy
Request for a quoteUDEN-UKRAINE
Ukraine
Ceramic design heaters (Ceramic design heaters are an incredible combination of texture, original painting and excellent heat storage properties. This mixture will simply not leave indifferent fans of inspired and sensual images, perfectly integrating into modern interiors.): ○ Ceramic heater KEN-600 (Ceramic- granite design heaters of the ART collection are a refined artistic line embodied in the author's artistic painting, which will not leave indifferent connoisseurs of inspired and sensual images)
Request for a quoteResults for
Ceramic heaters - Import exportNumber of results
63 ProductsCountries
Company type
Category